Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAccepted-AOC 44 VALLABH BHAI PATEL MARG PATH NO 2 UJJAIN M P | UJJAIN | UJJAIN | MADHYA PRADESH | ₹1.7 L | L1 | Accepted-AOC L1 Bidder |
| Sl No | Description | Qty | Unit | BHARAT MOTOR WINDING AND MECHANICAL WORKS L1 |
|---|---|---|---|---|
| 1.00Providing and repairing of 75 HP centrifugal motor pump set at sahibkhedi Pump Unit | ||||
| 1.01 | Complete dismantling of pump i/c fitting after repairing with motor pump alignment trail testing etc. loading & unloading site to work shop to site. Complete job. | 1 | Job | 3,786 ₹3,786 |
| 1.02 | Providing & fixing of hardware materials including nut bolt, packing, rubber sheet, gland etc. complete. | 1 | Job | 1,392 ₹1,392 |
| 1.03 | Providing & fixing of G.M. Long bush. | 2 | Job | 5,000 ₹10,000 |
| 1.04 | Providing & fixing of C.I. Gland plate & bush. | 2 | Job | 2,353 ₹4,706 |
| 1.05 | Providing & fixing of neck ring. | 2 | Job | 6,000 ₹12,000 |
| 1.06 | Providing & changing of coupling pulley rubber star tight fit with pump & motor couling | 1 | Job | 3,372 ₹3,372 |
| 1.07 | Providing & fixing of lower bearing no. SKF 3307 ATN 9 AUSTRIA 132 L | 1 | Job | 3,700 ₹3,700 |
| 1.08 | Providing & fixing of upper bearing no. SKF 6307 ATN 9 AUSTRIA 132 L | 1 | Job | 1,800 ₹1,800 |
| 1.09 | Providing & complete servicing of pump chamber fully movement of impuler unit with as per required fitting work including check nut, nut-bolt, wiser, oil paper etc. complete. | 1 | Job | 3,200 ₹3,200 |
Tender Value
₹1.7 L
EMD Value
₹3,310
Closing Date
16 Jan 2026, 5:30 pmClosed
EE PHE Maintenance Division
Rajasv Colony Dashara Maidan Ujjain
Repairing of 75 HP pump set at Sahibkhedi pump house.
2025_UAD_471230_1
PHE/E-TENDER 155/2025
Open Tender
Civil Works - Water Works
30 days
Ujjain
Please refer Tender Document
4 documents required · 4 mandatory
₹1,000
₹3,310
30 Apr 2026
27 Dec 2025
19 Jan 2026
27 Dec 2025
16 Jan 2026
27 Dec 2025
Providing and repairing of 75 HP centrifugal motor pump set at sahibkhedi Pump Unit
Complete dismantling of pump i/c fitting after repairing with motor pump alignment trail testing etc. loading & unloading site to work shop to site. Complete job.
Providing & fixing of hardware materials including nut bolt, packing, rubber sheet, gland etc. complete.
Providing & fixing of G.M. Long bush.
Providing & fixing of C.I. Gland plate & bush.
Providing & fixing of neck ring.
Providing & changing of coupling pulley rubber star tight fit with pump & motor couling
Providing & fixing of lower bearing no. SKF 3307 ATN 9 AUSTRIA 132 L
Providing & fixing of upper bearing no. SKF 6307 ATN 9 AUSTRIA 132 L
Providing & complete servicing of pump chamber fully movement of impuler unit with as per required fitting work including check nut, nut-bolt, wiser, oil paper etc. complete.
Providing & making of bearing sheet both side of pump & required maching lathe work complete.
packing paper and gland rope 10 mm
Complete pump fitting trial and testing at site
Bearing housing sleeve
Pump CI impeller
Providing for complete repairing & replacing burnet equipment for 3 nos. 75 HP auto transformer starter i/c the following equipment & works.
ML-4 L & T make contactor 50 hr, 415 volt.
ML-2 L & T make contactor 50 hr, 415 volt.
Volt meter 0-500 volt for starter.
Digital amp. meter 0-150 amp. for starter.
Current transformer coil range 50-100 amp. for starter
LED indacator lamp unit for starter
Relay unit range 0-100 amp.
Timer assembly unit for starter
On/Off switch unit for starter
Motor
Electro control pump guard aux. supply 415 volt amp range 20 (Phase failure + dry run + over load protection system)
Providing for complete replacing 250/300 ampere, 415 volt 50 Hz moulded case cricuit breaker (MCCB) of any standard make for main power supply equipment.
Providing & fixing of 100 amp. MCCB, 415 v., 50 hz., for star delta starter
Providing & fixing of incoming & outgoing fiber connection terminal plate with complete copper nut bolt & wiser.
Complete overhauling of panel & starter for using power circuit wiring & control circuit wiring as per required wire & lugs etc. trail & testing on load complete.
Loading & unloading complete job repairing for site to work shop & work shop to site.
Providing labor charges for scraping of old paint from main panel & starter embring & red oxide coating 2 coat & enameled paint for complete job.
Providing and fixing of heavy duty capacitor 440 V. 15 KVAR capacitor with complete as per required work.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
tender.pdf
Tender Documents • 1.28 MB
condition.pdf
Other Document • 0.65 MB
BOQ_554151.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid