REPAIR REPLACEMENT OF FILTERS V BELT AND MINOR PARTS OF DG SETS AT OLD CORPS AND NEW CORPS AREA UNDER GE 865 EWS LEH

Amount

S&F in replacement of flexible fuel pipe with complete accessories for filter to pump all as specified and directed by Engr-in-Charge

S&F in replacement of flexible fuel pipe with complete accessories to Feed pump to Filter all as specified and directed by Engr-in- Charge

S&F in replacement of flexible fuel pipe with complete accessories to feed pump all as specified and directed by Engr-in-Charge

S&F in replacement of flexible fuel pipe with complete accessories for pump leak off all as specified and directed by Engr-in-Charge

S&F in replacement of fuel filter cover with complete accessories for 500KVA DG Set all as specified and directed by Engr-in-Charge

S&F in replacement of Hose pipe with complete accesscories for Engine water in connect pipe for 62.5 KVA to750KVA DG Set all as specified and directed by Engr-in-Charge

S&F in replacement of exhaust manifold assembly with complete accessories for 280 to 500KVA DG Set all as specified and directed by Engr-in-Charge

S&F in replacement of alternator mounting bracket with complete accessories suitable for 280 KVA to 500KVA DG Set all as specified and directed by Engr-in-Charge

S&F in replacement of Air cleaner assembly kit with complete accessories for 280 KVA to 500KVA DG Set all as specified and directed by Engr-in-Charge

S&F in replacement of Hose for Air cleaner Suction with complete accessories for 140 KVA to 500 KVA DG Set all as specified and directed by Engr-in-Charge

S&F in replacement of Fan drive pulley Assembly with complete accessories for 140 KVA to 500KVA DG Set all as specified and directed by Engr-in-Charge

S&F in replacement of Feed Pump with complete accessories for 140 KVA to 750KVA DG Set all as specified and directed by Engr-in-Charge

S&F in replacement of Water Level Tubes with complete accessories for 140 KVA to 750KVA DG Set all as specified and directed by Engr-in-Charge

S&F in replacement of Digital RPM Meter Hours meter with complete accessories for 500 KVA to 750 KVA DG Set all as specified and directed by Engr-in-Charge

S&F in replacement of Charging Alternator 12V, 35 Amps with 2Wire with complete accessories all as specified and directed by Engr-in-Charge

S&F in replacement of rubber house with complete accessories for drain pipe all as specified and directed by Engr-in-Charge

S&F in replacement of Stop Solenoid 24V with complete accessories all as specified and directed by Engr-in-Charge

S&F in replacement of Antivibration mount RR400 Height 72mm with complete accessories all as specified and directed by Engr-in-Charge

S&F in replacement of CR bearing of following DG Sets make Kirlosker/ Cummins/Greaves complete all as specified and directed by Engr-in-Charge.

500 KVA Greaves complete all as directed.

280 KVA Kirloskar complete all as directed.

160/140/125/110 KVA Greaves/kirloskar complete all as directed.

63 KVA Kirloskar complete all as directed.

S&F in replacement of Exhaust Spring elbow for the following DG Sets complete all as specified and directed by Engr-in-Charge :-

750 KVA cummins complete all as directed.

500 KVA Kirloskar complete all as directed.

280 KVA Greaves complete all as directed.

160/140 KVA Kirloskar complete all as directed.

63/62.5 KVA Greaves complete all as directed.

M&L for disconnecting the U/s alternator Capacity 750KVA 3Phase any make & type from engine, transporting to civil workshop dismantling it for repairing and rewinding by taking out burnt armature winding aligning the alternator coil with existing gauge/size of super enamelled copper winding wire, providing new insulation, sleeves , varnising cotton taping etc, reassembling the alternator complete including aligning with engine and testing in all aspects for smooth functioning all as specified and directed by Engr-in-Charge .

M&L for disconnecting the U/s alternator Capacity 500KVA 3Phase any make & type from engine, transporting to civil workshop dismantling it for repairing and rewinding by taking out burnt armature winding aligning the alternator coil with existing gauge/size of super enamelled copper winding wire, providing new insulation, sleeves , varnising cotton taping etc, reassembling the alternator complete including aligning with engine and testing in all aspects for smooth functioning all as specified and directed by Engr-in-Charge .

M&L for disconnecting the U/s alternator Capacity 280KVA 3Phase any make & type from engine, transporting to civil workshop dismantling it for repairing and rewinding by taking out burnt armature winding aligning the alternator coil with existing gauge/size of super enamelled copper winding wire, providing new insulation, sleeves , varnising cotton taping etc, reassembling the alternator complete including aligning with engine and testing in all aspects for smooth functioning all as specified and directed by Engr-in-Charge .

M&L for disconnecting the U/s alternator Capacity 140KVA 3Phase any make & type from engine, transporting to civil workshop dismantling it for repairing and rewinding by taking out burnt armature winding aligning the alternator coil with existing gauge/size of super enamelled copper winding wire, providing new insulation, sleeves , varnising cotton taping etc, reassembling the alternator complete including aligning with engine and testing in all aspects for smooth functioning all as specified and directed by Engr-in-Charge .

M&L for disconnecting the U/s alternator Capacity 63/62.5KVA 3Phase any make & type from engine, transporting to civil workshop dismantling it for repairing and rewinding by taking out burnt armature winding aligning the alternator coil with existing gauge/size of super enamelled copper winding wire, providing new insulation, sleeves , varnising cotton taping etc, reassembling the alternator complete including aligning with engine and testing in all aspects for smooth functioning all as specified and directed by Engr-in-Charge .

S&F in replacement of thermostate valve for following DG Set make Kirloskar /Cummins/Greaves complete all as specified and directed By Engr-in-Charge

750KVA DG set

500 KVA DG Set

280KVA DG Set

160/140KVA DG Set

63/62.5KVA DG Set

S&F in replacement of Automatic Voltage Regulator (AVR) for following DG Set make Kirloskar /Cummins/Greaves complete all as specified and directed By Engr-in-Charge

750KVA DG set

500 KVA DG Set

280KVA DG Set

160/140KVA DG Set

63/62.5KVA DG Set

M&L for taking out burnt winding of exciter of following capacity of DG Sets including re-winding with super enameld copper wire of super quality of existing size, No of turns, varnishing, heating complete including testing on full load to entire satisfaction of Engr-in-Charge.

750KVA DG set

500 KVA DG Set

280 KVA DG Set

160/140 KVA DG Set

63/62.5 KVA DG Set

Repair and servicing cleaning of silencer/exhaust manifold for following DG Sets of make Kirlosker /Cummins/Greaves all as specified and directred by Engr-in-Charge.

750KVA DG set

500 KVA DG Set

280KVA DG Set

160/140KVA DG Set

63/62.5KVA DG Set

S&F in replacement of battery terminal for DG Sets complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Battery lead 2mtr long Red & Black 20mm dia, copper wire with thimble complete as directed by Engr-in-Charge.

Suplly and Filling in replacement battery distilled water for the DG sets complete all as specified and directed by Engr-in-Charge.

Supply only cotton waste for daily use for cleaning the DG sets complete all as specified and directed by Engr-in-Charge.

S&F in replacement of High pressure pipe line (Brass/Copper) with benjo bolt and washer of following DG Sets of make Kirlosker/ Cummins/Greaves complete all as specified and directed by Engr-in-Charge.

750KVA DG Set

500KVA DG Set

280KVA DG Set

160 KVA DG Sets

140 KVA DG Sets

62.5 KVA DG Sets

M&L for complete removal of existing painting of exposed and hidden surface by scraping of old paint and proper cleaning of DG Set of the following capacity of make Kirloskar/Cummins/Greaves and M&L for applying two coats of synthetic enamel paint over a coat redoxide primer and all as per existing colour complete all as specified and directed by Engr-in-Charge.

500KVA DG Set

280KVA DG Set

160/140KVA DG Set

S&F in replacement off load changeover switch 800 Amps, 4 pole in sheet metal enclosure, side /front handle operated, cat No IHCFFE0630 Make-Havells or equivalent of L&T/Legrand/ABB/ Schneider complete all as secified and directed

S&F in replacement off load changeover switch 630 Amps, 4 pole in sheet metal enclosure, side /front handle operated, cat No IHCFFE0630 Make-Havells or equivalent of L&T/Legrand/ABB/ Schneider complete all as secified and directed

S&F in replacement off load changeover switch 400 Amps, 4 pole in sheet metal enclosure, side /front handle operated, cat No IHCFFE0630 Make-Havells or equivalent of L&T/Legrand/ABB/ Schneider complete all as secified and directed

S&F in replacement off load changeover switch 200 Amps, 4 pole in sheet metal enclosure, side /front handle operated, cat No IHCFFE0630 Make-Havells or equivalent of L&T/Legrand/ABB/ Schneider complete all as secified and directed

S&F in replacement of old unserviceable Battery 12V 180AH with complete all as specified and directed by Engr-in-Charge. Make : Exide/Amaron/Luminous

S&F in replacement of old unserviceable Battery 12V 150AH with complete all as specified and directed by Engr-in-Charge Make : Exide/Amaron/Luminous

Supply, laying, installation and commissioning in replacement of LT underground cable ISI marked XLPE insulated heavy duty electric cable armoured and PVC sheathed heavy duty 1100 volts grade with aluminium conductor multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, ducts and fixing with fixing material on pole, wall complete of 630 sqmm 3.5 core complete all as specified and as directed. Make : Cable Corporation of India/Finolex Cable Co/Polycab/ GlosterHavells/KEI/ RR Kabel

Supply, laying, installation and commissioning in replacement of LT underground cable ISI marked XLPE insulated heavy duty electric cable armoured and PVC sheathed heavy duty 1100 volts grade with aluminium conductor multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, ducts and fixing with fixing material on pole, wall complete of 400 sqmm 3.5 core complete all as specified and as directed. Make : Cable Corporation of India/Finolex Cable Co/Polycab/ GlosterHavells/KEI/ RR Kabel

Supply, laying, installation and commissioning in replacement of LT underground cable ISI marked XLPE insulated heavy duty electric cable armoured and PVC sheathed heavy duty 1100 volts grade with aluminium conductor multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, ducts and fixing with fixing material on pole, wall complete of 300 sqmm 3.5 core complete all as specified and as directed. Make : Cable Corporation of India/Finolex Cable Co/Polycab/ GlosterHavells/KEI/ RR Kabel

Supply, laying, installation and commissioning in replacement of LT underground cable ISI marked XLPE insulated heavy duty electric cable armoured and PVC sheathed heavy duty 1100 volts grade with aluminium conductor multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, ducts and fixing with fixing material on pole, wall complete of 240 sqmm 3.5 core complete all as specified and as directed. Make : Cable Corporation of India/Finolex Cable Co/ Polycab /GlosterHavells/KEI/ RR Kabel

S&F in replacement MCCBs 415 Volt 4 pole C Frame Adjustable thermal & adjustable Magnetic Setting with breaking capacity 35KA 200 Amps complete all as specified and directed by Engr-in-Charge Make : Legrand/ABB/Schneider/L&T

S&F in replacement MCCBs 415 Volt 4 pole C Frame Adjustable thermal & adjustable Magnetic Setting with breaking capacity 35KA 250 Amps complete all as specified and directed by Engr-in-Charge. Make : Legrand/ABB/Schneider/L&T

S&F in replacement MCCBs 415 Volt 4 pole C Frame Adjustable thermal & adjustable Magnetic Setting with breaking capacity 35KA 400 Amps complete all as specified and directed by Engr-in-Charge. Make : Legrand/ABB/Schneider/L&T

S&F in replacement MCCBs 415 Volt 4 pole C Frame Adjustable thermal & adjustable Magnetic Setting with breaking capacity 35KA 630 Amps complete all as specified and directed by Engr-in-Charge. Make : Legrand/ABB/Schneider/L&T

Note :- Makes of spare parts to be replaced under this work and mentioend in relevant items in this BOQ here-in-before shall be of approved make and as per the manufacturer's recommendation of DG sets and other equipments.

SUMEET TRADING CORPORATION

M/S BETONG CONSTRUCTION CO

Hitech Erectors Pvt. Ltd.

PADMA ENTERPRISES

R B TRADERS

Horizon Construction Company