Loading…
Loading…
Tender Value
₹42.5 L
EMD Value
₹85,000
Closing Date
15 Oct 2026, 6:00 pm
GE South Delhi Cantt-10
GE South Delhi Cantt-10
PROVN OF CERTAIN MINOR AND REVENUE WORKS UNDER AGE B/R -II OF GE (SOUTH) DELHI CANTT-10
2026_MES_790894_1
GE/TOKEN-55/2026-27
Open Tender
Civil Works
Item Rate
120 days
GE South Delhi Cantt
As per Tender Documents
10 documents required · 10 mandatory
₹500
GE South Delhi Cantt
₹85,000
Yes
24 Sept 2026
24 Sept 2026
17 Oct 2026
24 Sept 2026
15 Oct 2026
8 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplus soil to distance n.exc 50m and making good surface in soft/loose soil complete all as specified and directed. | 190 | Each | - | - |
| 2 | M & L for Cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified & as directed. | 13 | Cum | - | - |
| 3 | M & L for cutting holes into or through brick walls exc half brick work but not exceeding one brick work built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 complete all as specified and as directed. | 46 | Each | - | - |
| 4 | Cutting chases , pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges or landings, steps, cills, sunshades, shelves, lintel, etc and cutting in chases for concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth complete alll as specified and as directed. | 116 | RM | - | - |
| 5 | M&L for steel work in tubuler trusses including special shaped washer, cleats etc complete using ERW or induction butt welded tubes confirming to IS: 1161-1979 grade st - 240 complete all as specified & as directed. | 3,085 | Kg | - | - |
| 6 | M&L for applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and as directed. | 258 | Sqm | - | - |
| 7 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & as directed. | 322 | Sqm | - | - |
| 8 | S&F 4 mm thick Fibre glass reinforced translucent plain sheeting of any colour and pattern fixed with coach screw and washer in wall , complete all as specifed and as directed. | 936 | Sqm | - | - |
| 9 | M&L for framed work as in doors, gates of angle Fe -410 Gde E 250 quality section with gussed plates complete drilled or welded to be prepared for hanging or sliding with and including either hooks and hinges complete all as specifed and as directed. | 1,800 | Kg | - | - |
| 10 | Surface dressing not exceeding 15 cm deep in any type of soil complete all as specified and as directed. | 825 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.73 MB
TenderpagesT55.pdf
Tender Documents • 1.19 MB
BOQ_886643.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .