Under District Barabanki, Construction of road from Dhaniram house to Nandlal house in the entire Raghunath of Gram Panchayat Bhendua Bahrale under Khand Banikodar, Lot No 4

Work

Earth work in cutting or in embankment in ordernary soil exavation to be the form or regular pits not exceeding 0.50m in depth and from borrow pits with a lift upto 1.5m with normal lead upto 3000m, Tranporting to site. Spreading, grading to required slope. By cartage 3.00Km. SI No. 253

E/W in excavation in trenches for foundation & for pipes cables etc. in ordinary Soil (Loam clay or sand) including fit up to 1.5 m. & dressing of sides & ramming bottoms & disposal of surplus excavated earth as directed by the engineer I/C with in a lead of 50m. SI No. 251

Providing and laying in cement concrete 1:6:12 (I cement : 6 fine sand of1.25 FM : 12 graded brick aggregate 40 mm. Nominal Size) curring complete. including cost of work. As Per SI. No.273

M-150 Class brick work in 1:4 cement and coarse sand mortar in supper structure including supply of all materials, labours and tools and plants etc. required for proper completion of the work. As Per SI.No.305 (B.)

R,C.C. work with cement approved coarse sand and 20 mm gauge approved stone grit in proportion of 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size )of strength not less than excluding supply of reinforcement & its cuttin

Mild steel (ribbed tor steel) or I/W in plain work such as reinforced concrete or reinforcement B/w when not I/C over all rates, wrought to required shape as necessary i/c bending for proper completion of the work and i/c of all (Material not Issued to s

12mm thick in 1:3 Cement and c/sand Below Plinth/bearing plaster including meterial. And also using in plinth & roof .SI No.583

Providing and laying 25 mm thick PCC floor in 1:2:4 with cement coarse sand and 20 mm gauge stone grite. Including Supply of Material T&P etc.Complete work.As per S.I. No.601

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density complete. as per MORD Sr.No.4.1 Technical Specification Clause 401.(G.S.B. Quarry Shankergarh Grade-1)