8149 CONSTRUCTION OF VACATIONAL LAB UNDER PM SHRI FOR KV 03 COLABA MUMBAI AND ADDITION ALTERATION OF SEWAGE SYSTEM AT INS ANGRE CASTLE BARRACKS FROM SHIPS GALLERY UPTO MAIN GATE UNDER GE NW KUNJALI

Amount

Excavating in trenches, n.exc 1.5 M wide and n.exc 1.5 M in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 M in depth and getting out in hard dense soils complete all as specified and as directed.

M&L for PCC 1:2:4 type B-2 ( 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for RCC (design mix), M-30 in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC (design mix), M-30 in beams, cantilevers, bressummers, lintels over 1.5 mtr span complete all as specified and as directed.

M&L for RCC (design mix), M-30 in Columns, pillars, piers, posts and struts etc. complete all as specified and as directed.

M&L for RCC (design mix), M-30 in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and as directed.

M & L RCC (design mix), M-30 in chajjas etc.complete all as specified and as directed.

M &L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foudation and plinth beams, and similar work, vertical of to batter. on flat rough finished surfaces of concrete complete all as specified and as directed.

M &L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work , not exceedig 200mm thick on flat rough finished surfaces of concrete complete all as specified and as directed. .

M &L form work to chajjas including edges on flat rough finished surfaces of concrete complete all as specified and as directed.

M &L form work to s sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including suports, overhangs, etc on flat rough finished surfaces of concrete complete all as specified and as directed. .

M &L form work to s sides of pillars, posts, sruts, piers, columns and stanchions on flat rough finished surfaces of concrete complete all as specified and as directed. .

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. .

All as per item No. 13 above but 5 mm dia and over in stirrups, spacers and binders complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.

Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm in hard/ dense soil complete all as specified and as directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:6 on brick surfaces, finished even and smooth without using extra cement on walls complete all as specified and as directed.

M&L rendering 10mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and as directed.

M & L rendering 20mm thick in two coats(15mm inner coat 5mm finishingcoat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound on finishing coat in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed. (Note: Water proofing compound shall be measured and paid for separately).

Supply only integral water proofing compound complete all as specified and as directed.

M&L for applying 3mm thick wall care putty on wall surfaces complete all as specified and as directed.

M &L for applying two coats of oil emulsion distemper over newly plastered/ putty surfaces of wall complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil emulsion distemper complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two or more coats of 100% weather acrylic base paint over one coat of cement based primer with necessary scaffolding etc complete all as specified and as directed.

M & L anti termite treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M & L anti termite treating the back fill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface area complete all as specified and as directed. .

M & L anti termite treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M & L anti termite treating the soil under plinth protection at the rate of 5 litres of emusion per square mere of surface area complete all as specified and as directed. .

M & L anti termite treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed. .

M &L soil filling in floors or pavings, laid in layers n exc 15cm thic, spread, levelled and rammed including watering complete all as specified and as directed.

M &L hardcore of gauge n exc .63 mm , deposited, spread and levelled in layers n exc 15 cm thick , watered and well rammed to a true surface complete all as specified and as directed. .

M & L100mm thick cement concrete type C2, 1:3:6 (40 mm graded agg )as in sub base complete all as specified and as directed. .

M & L 75mm thick cement concrete type C2, 1:3:6 (40 mm graded agg )as in plinth protection including finishing the surfaes even and smooth without using extra cement complete all as specified and as directed. .

M&L light shade double charged virified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Note : GE shall approve colour and design of tile from respective catalogue

M&L light shade double charged vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm),but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM1:3 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. . Note : GE shall approve colour and design of tile from respective catalogue

M&L for coloured glazed ceramic tiles 450x300x7 mm thick but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM 1:3 complete all as specified and as directed. Note : GE shall approve colour and design of tile from respective catalogue

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Rounding to edges of stone slabs on edge, such as in steps, cooking platform and making grooves for lining and other similar work complete all as specified and directed.

S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling complete all as specified and as directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L for false ceiling made out of 600x600x 4 mm thick ( non asbestos fiber cement designer/coloured)ceiliing board / tiles deep panel complete all as specified and as directed.

M & L in repairs 18 mm thick factory made acrylic board suitable for cupboards, drawers etc of any colour complete all as specified and as directed.

M&L for Auto clouse hinges stainless steel for full overlap for cup board shutters etc complete all as specified and as directed.

Stainless Steel cabinet/ door/drawer handle decorative handles suitable size varying from100 to 200 mm complete all as specified and as directed.

S & F in repairs SS Magnetic door catcher for drawer, cupboards etc complete all as specified and as directed.

S&F Stainless steel locks suitable for cupboards, drawers etc complete all as specified and as directed.

S&F sink made of stainless steel 1mm thick sheet laboratory with plugs, washers and waste pipe incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size495mmx420mm bowl size 410 x 330 x 160mm.

S&F fancy type cock suitable for sink with raised J shaped swinging spout (wall mounted model 15 mm dia, screwed for iron pipe and fixed complete all as specified and as directed.

S & F angular stop cock 15 mm dia , screwed for pipe and fixed complete all as specified and as directed.

S & F Stainless steel single towel rail 600mm long complete all as specified and as directed.

S&F powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, sliding windows/ partion/Ventilator etc including fixing and making the frames for hinges glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement,in sliding shutter, sealant etc complete all as specified and as directed. .

S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 102, 7.5 mm thick complete all as specified and as directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed.

S&F150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed.

S&F Stainless steel butt hinges 100 mm complete all as specified and as directed. .

M & L for MS flat for hold fast. Conforming to Fe-290-0 or Fe-165 complete all as specified and as directed.

S&F 140 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed.

S & F Aluminium extruded body door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and ofweight not morethan 35 kg and fixed complete all as specified and as directed.

S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified erected in position and securing runners with holdfasts and brackets complete all as specified and directed.

S & F UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, celing etc or in floors etc 25 mm bore pipe complete all as specified and as directed.

S & F UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, celing etc or in floors etc 15 mm bore pipe complete all as specified and as directed.

S&F roller/venetian blinds vertical/horizontal type made out of standard cloth of approved texture with necessary accessories etc complete all as specified and as directed.

S&F rotational moulded polythylene water storage tank of 1000 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) complete all as specified and as directed.

S&F 2nd class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and as directed.

M&L for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces complete all as specified and as directed.

M&L for roughening surfaces of concrete surfaces and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement including mixed with water proofing compound as per manufacturer instructions complete all as specified and as directed. (Note: WPC shall be measured and paid separately).

M&L for applying a coat of bituminous primer 0.25 Kg/Sqm on prepared surface of plaster as per manufacturer's instructions, manufactured by the same agency of APP membrane. After applying of bituminous primer applying evenly a coat of bitumen 85/25 at the rate of 1.2 kg per sqm incl cleaning surfaces. Providing and laying five layered 3 mm thick APP (Atatic poly propylele) modified polyester reinforced water proofing membrane with minimum weight of 4.60 Kg/Sqm, as specified here-in-after. The APP membrane shall be laid using torch on application with minimum 100 mm side overlap and 150 mm end overlap. The laying of membrane shall be got done through an authorised applicator of manufacturer of the membrane. The APP membrane shall be taken upto minimum 200 mm on vertial surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet . over the APP membrane provide a polypropylene/polyester, non woven geotextile fabric of 150 gram/Sqm complete all as specified and directed. Notes :- (i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of bituminous primer and a coat of bitumen 85/25 at the rate of 1.2 Kg per Sqm for APP membrane omplete all as specified and directed .

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and as directed.

S & F PVC (SWR) bends 110 mm single/double 'Y' or 'T' with access doors any radius including fixing clips complete all as specified and as directed.

S & F 25 mm Gun metal globe or gate valves, with iron wheel head, screwed both ends, for iron pipe complete all as specified and as directed. .

S & F 15mm Gun metal globe or gate valves, with iron wheel head, screwed both ends, for iron pipe complete all as specified and as directed. .

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 150 mm (internal dia of pipe) set in cement mortar complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 300 mm (internal dia of pipe) set in cement mortar all as directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 ( 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L cement concrete 1:2:4 type B2, using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:3 on brick walls including finishing the surfaces even and smooth without using extra cement. complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:4 on brick walls including finishing the surfaces even and smooth without using extra cement. complete all as specified and as directed.

M&L preparation of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic based paint (100% acrylic) all as specified & directed.

M & L reinforced concrete pipes, class NP3, laid and jointed complete with collars 150 mm bore complete all as specified and as directed.

All as per item No. 86 above but for but 300 mm bore complete all as specified and as directed.

M & L Concrete bed to drain pipes type C2 1:3:6 including packing under and haunching against the sides of pipes after they are laid and tested 150 mm bore complete all as specified and as directed.

All as per item No. 88 above but for but 300 mm bore complete all as specified and as directed.

Removing excavated hard/dense soil n exc 250 mtr and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.

M & L cement Concrete type B1 1:2:4 (20 mm graded agg) as in coping including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Cleaning & desilting of manholes depth not exc 1.50 mtr by pumping out/removing liquid waste/sewage & plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same (silt, sludge & other waste material) in leak proof trucks covered with tarpaulin to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with fresh water etc complete all as specified and directed.

Cleaning & desilting of manholes depth excd 1.50 m but not excd 3.00 m by pumping out/removing liquid waste/sewage & plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc & removing the same(silt, sludge & other waste material) in leak proof trucks covered with tarpaulin to outside of MD land all as per existing rules & regulations of civil authorities and cleaning the manholes with fresh water etc complete all as specified & directed .

Cleaning and desilting of sewage lines upto 150mm bore and sludge chambers, gully traps of size and shape upto any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water etc complete all as specified and directed . (Note: Length of sewage lines including chambers, traps etc will be measured for payment. However cleaning of manholes shall be measured separately under appropriate item.)

Cleaning and desilting of sewage lines exc. 150mm dia but n.exc 300 mm dia and sludge chambers, gully traps of size and shape upto any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water etc complete all as specified and directed. (Note: Length of sewage lines including chambers, traps etc will be measured for payment. However cleaning of manholes shall be measured separately under appropriate item.)

Empting septic tanks and manholes of any depth by providing sewage suction vehicle of capacity 5000 ltrs(BMC Patteren) including necessray other arrangments such as sweepers to clean up the site after work and depositing the same at places earmarked outside MOD land upto 25 KM lead and lift complete one or more times all as specified and directed. Note:- (a) All precautions to be taken by all workers while working in foul condition,Contractor shall take all necessary actions. (b) After cleaning vehicle will be contractors's property. (c) Contractor accredated representive shall be availble during cleaning. (d) Complete process shall be completed in all respects within a day.

M&L cleaning the existing drainage/culvert including removing cover slab, soils,spoils, vegetation, silt etc and refixing cover slab including making good and removing waste materials outside MD Land complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings,chequred plates etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walkj ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 complete all as specified and as directed.

M & L cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railings, frames, manhole covers, fire and soot doors, dampers, stopvalve boxes, gate stops, parts of ranges, balusters and similar articles exc 5 kg each complete all as specified and directed by Engineer -in-Charge.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F in repairs 75 mm dia bore PVC (SWR) bends, single/double 'Y' or 'T' with access doors any radius including fixing clips complete all as specified and as directed .

M&L for hard core of broken stone or boulders of gauge n. exc. 63 mm, deposited, spread and leveled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed .

M& L for 100mm thick PCC 1:4:8 type in foundation type D2 using 40mm graded granite stone aggregate as in subbase finished fair and even including necessary formwork complete all as specified and as directed .

M & L 100 mm thick cement concrete type B2 1:2:4 (40 mm graded agg) including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed

M&L for pre painted machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour incliuding filling the joints with rising surface vibrator etc complete all as specified and as directed .

M&L for sand under floors or in foundations including watering and consolidation, spreading and levelling in layers n exc 25 cm thick and well ramming including watering as required complete all as specified and as directed ..

Material and Labour for machine pressed cheqered cement coloured tiles of size 300mmx300mmx20mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointedin neat cement slurry in floors complete all as specified and as directed .

Supply and laying reinforced precast concrete cable cover, class EHV type 2 with peak, size 600mmx230mmx50mm complete all as specified and as directed .

M&L for laying readymade bitumen patchmate (using 6mm graded aggregate) suitable for repair pot holes or any surfaces of asphaltic or concrete pavement, in 25 Kgs/ bag complete all as specified and directed.

Removing any kind of debris including loading in truck and conveying day to day basis to approved dumping point i.e @ urban / industry loading spreading etc. complete with all leads and lifts (lead 50km) complete all as specified and as directed .

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, (Make: Havells/ Finolex/ Plaza) drawn through and including non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall//ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of PVCmoduler box with cover plate in any size fixed on wall for fixing the switches, switch sockets,sockets, regulators etc complete all as specified for One light point controlled by one 5A switch complete all as specified and as directed . NOTE: a) Colour coding shall be followed as given below:- i) Phase - Red/Blue/Yellow ii) Neutral - Black iii) Earth - Green b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

All as per item No. 111 above but for One Fan point controlled by one 5A switch

All as per item No. 111 above but for One 5A flush type switch socket point on same board board

All as per item No. 111 above but for One 5A flush type switch socket point on independent board

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including required size of PVC modular box with cover plate for One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red/Blue/Yellow (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately.

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed.

S & F modular switch 1 way 6A complete all as specified and directed.

S & F modular switch 1 way 16A,1 module complete all as specified and directed.

S & F modular socket, 6A - 2/3 pin combined 2 modules complete all as specified and directed.

S & F modular socket 6/16A,2/3 pin, combined 2 module complete all as specified and directed.

S&F for modular fan step regulator, 120W - 2 modular complete all as specified and directed.

S&F on replacement of hanger clamp assembly with down rod up to 3 feet for hanging of ceiling fan with nuts,bolts,washers & split pin complete all as specified & directed .

Supply and fixing in repair new generation ultraslim LED panel recessed LED 2X2 Luminaire 36 watt, CRCA powder coated body and high translucent diffuser provides high quality ecomonic energy saving lighting Suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and directed. Make : Jaguar cat No LSVR01S036XC or equivalent manufactures in list of manufactures.

Supply and fixing in repair new generation walll/surface mounted 1x 20W LED batten fitting, 4 feet surface mounted provides high quality ecomonic energy saving lighting complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : Shakti cat No SZSLBMX020 or equivalent manufactures in list of manufactures.

Supply and fixing in replacement LED 60W Street/building security light fittings with high pressure die cast housing with toughened glass and individual LED with secondary optics and IP66 protection complete all as specified and directed . Make : Shakti Cat No SLPSLMM120-SDC or equivalent manufactures in list of manufactures.

Supply and fix in replacement MS arms bracket 30 degree bend, 1.5mtr long for mounting one in nos street light fitting including clamps / nut / bolts & washer to brace the same properly with duly painted in synthetic enamel paint of two coat in silver colour complete all as specified and directed .

S&F in repair of double door type vertical type TPN DB 6 Way ,415V with busbar , double door type IK 09 protection suitable for housing MCCB's all as specified and directed . Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S&F in repair of double door type SPN DB 08 Way ,240V with 100A copper busbar each phase , double door type IK 09 protection suitable for housing MCB's complete all as specified and directed . Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S & F MCB SP 6-32 Amps,10KA, 'B' curve, complete all as specified and directed .

S & F MCB SPN 40 Amps,10KA , 'B' curve complete all as specified and directed .

S & F MCB TP 40 Amps,10KA , 'B' curve complete all as specified and directed . Make : C&S cat No CSMBS3B40 or equivalent make from list of manufactures

S & F MCCB FP 100 Amps,16KA, complete all as specified and directed.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity of 1.5 TR complete all as specified and directed.

Supply and fixing copper tubings of appropriate dia for suction line & for liquid discharge line duly insulated with suitable insulation material including making hole in wall for passing thugh pipe and making good distrubed surface completely complete all as specified and directed. .

Supply and fix ceiling fan 1200 mm sweep speed 385 RPM, Air delivery of 210 CMM of white colour and fixed on ceiling with the clamp and down rod complete all as specified and directed.

M&L for sub-main wiring with 2 runs of 10.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and iincluding non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall//ceiling/truss etc as required, including one run of 10.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green

Disconnecting & taking down old Unservicable cable & Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50sq mm 3½ core complete all as specified and directed .

Material and Labour for Earthing complete with MS plate electrode of size 600 X 600 X 6 mm buried directly and preferably vertically in ground (earth pit not less than 2.25 mtrs deep below ground level ) with top edge of the plate not less than 1.5 Mtrs below ground level, connected to earth strip 25x4 mm galvanized MS strip by means of check nuts, bolts, washers etc all as shown in electrical plate No. 5 of SSR Part-I, connected to Earthing test point including earth work, 1:3:6 C1 PCC chamber, 1:2:4 B1 PCC cover with 8 mm dia steel bars at 100 mm C/C suitable size of GI pipe for earth lead protection and watering, water funnel etc. complete all as specified and directed.

M&L for 25x4mm GI earth continuity conductor or main earthing lead fixed to wall or buried in ground or drawn in conduit/ pipe or fixed to transformer/panel body complete all as specified and directed.

M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed.

SHREE JAGDISH FURNITURE CO. (BID ID -3151578)

H R Enterprises (BID ID -3157467)