Construction of Public Toilet in Panchyat Palohta under social welfare activities of BSL P BBMB Sundernagar.

Amount

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling or around masonry in 15 cm layers with compaction including disposal of all surplus soil as directed with in lead of 30 mm metres.

Earth filling under floors with surplus soil containing more than 40% gravel or kankar excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead up-to 30 metres.

Cement Concrete 1:8:16 with 40mm gauge stone aggregate.

First class burnt brick work laid in cement sand mortar 1:6 in foundation & plinth.

First class burnt brick work laid in cement sand mortar 1:6 in first storey up-to 4.00 mtr. Above plinth level.

Damp proof course 4 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration @ 1.65 kg per sqm laid hot and sanded.

Constructing soak pit 1.20x1.20x1.6 m deep, 230mm thick 1:5 brick work honey comb with bricks of 1st Class filled with brickbats including S.W. drain pipe 100 mm Diameter and 1.20 m long complete as per standard design.

12.5 mm thick cement plaster 1:5.

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement, centring and shuttering in super structure.

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete.

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40 mm gauge using mechanical mixer for mixing materialand 100mm sand filling.

Providing and laying flooring Floating coat of 1.5mm thick neat cement laid in one operation to the topping.

Conglomerate floor 40 mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material.

Providing and fixing M.S. angle iron 40x40x6mm chowkhat (double rebate) including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect.

Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS:2202-1 (1999). 35mm thick Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges.

Providing and fixing M.S. round or square bars at required spacing in wooden frames of windows and clearstory windows.

Applying pink primer or aluminium priming coat on wood work including preparation of surface knotting and stopping etc.

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm.

Painting two coats excluding priming coat with synthetic enamel paint in all shades on old wood work, metallic or plastered or concrete surface to give an even shade. Including rubbing down old paint.

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade.

Finishing walls with water soluble exterior cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade.

Filling stone or spall on level.

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing in position vitreous Chinaware white Indian make large flat back or angular lipped front urinal 375x390x590 mm of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass urinal waste coupling dom type 32 mm outer length 75 mm, C.P. Brass urinal spreader ocular-regular and C.P. brass tube connection 300 mm long complete.

Providing and fixing in position vitreous chinaware white lavatory suits of approved make (to the approval of Engineer-in-charge) including rack bolt screw pair 115 mm long without C.P. fittings complete in all respect. Size 500mmx400x820 mm.

Providing & fixing in position 15 mm i/d bib cock ( approved make to the approval of the Engineer-in-charge). Brass Bib cock/stop cock 15mm x 400gm {CSR 30.65 A (d)}

Providing & fixing in position stop cock / Angle valve (as approved by the Engineer-in-charge). C.P. Brass 15mm angle valve without flange.

Providing & fixing in position best Indian make PVC flexible tube connection of size 15mmx 450mm with CP brass nut.

Providing and fixing centrifugally cast iron floor traps conforming to I.S.I. Specification (IS:3989) of reputed firm of the self-cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required up-to floor level complete in all respects including cutting and making good the walls and floors etc. minimum depth of water should be 150mm with a minimum seal 50mm. With 100 mm x 75 mm i/d 600 mm long.

Providing and laying, jointing fixing and testing I.S.I. marked G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complete. a) 15mm i/d.

20 mm internal dia.

Providing & placing in position on terrace (at all floor level) HDPE water storage tanks of approved make (to the approval of Engineer-in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank triple layer tanks.

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement mortar 1:5 cement concrete 1:2:4 in coping around cover and frame etc. with three coats of black bitumastic superior paint of approved manufacture on all C.I. work as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. 100mm internal Diametre H.C.I. gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x. 330mm.

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:2 (1 cement: 2 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete. For pipes 100 to 250 mm Diameter.

Providing, laying, fixing and jointing P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including cost of specials complete as per specifications. 75mm old pipe of 10KG/Sqcm.

Providing and fixing in position H.C.I. special for soil waste vent or anti siphonage pipes to ISI marked special kind of ELC manufacture or any other reputed including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 75mm i/d HCI heal rest bend.

Vitreous white Chinaware Partition. Large partition size 75 x 16.5 x 36.5 cm.

Providing & fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge). Size 600mm x 450mm

Providing, fixing and jointing ISI Marked Gun Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. 15mm i/d Gun Metal peet valve heavy pattern.

20mm i/d Gun Metal peet valve heavy pattern.

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.300mm x 16mm.

Providing and fixing in position C.P. Acrylic shelf with C.P. bracket and guard rails of approved make (to the approval of Engineer-in-charge) fixed in with rawl plugs and C.P brass screws complete in all respect. CP brass Acrylic Shelf size 560mmx130mm.

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. C.P. brass towel Rails size 15mm dia 610mm long.

AKSHAY KUMAR

Vipul Chaudhary