Upgradation Reconstruction of District Jail Poonch by way of Construction of Kitchen block at District Jail Poonch

Amount

Earthwork in excavation by mechanically / manual means over areas (exceeding 30 cm in depth, 1.5 Mtr in width as well as 10 sqm on plan) and trenche, cables etc including disposal of excavated earth, as directed at site, disposed earth to be leveled and neatly dressed all kinds of soil including all leads lifts and carriages of disposed earth by mechanical/ manual means complete Job.

Providing and laying in position cement concrete of specified grade in 1:4:8 (1 cement : 4 course sand : 8 graded stone agg. 40mm nominal size) excluding the C/o centering and shuttering all work upto plinth level including curing and all sorts of carriages and cost of materials involved.

Providing and laying in position cement concrete of specified grade excluding C/o centering and shuttering all work upto plinth level in 1:3:6 (1 cement : 3 course sand : 6 stone agg. using 20mm nominal size) crushed agg. including curing complete and all sorts of carriages and cost of materials involved. complete Job

Filling of stones boulders/brick bats including all carriage and cost of material complete ( stones/ boulders available at site)

Providing and laying in position specified grade of reinforced cement concrete excluding C/o centring and shuttering finishing and reinforcement all work upto plinth level 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone agg. 20mm nominal size) including all sorts of carriages and cost of materials involved.

Brick work with FPS bricks of class designation 75-A in super structure upto floor V level in cement mortar 1:6 (1 cement :6 coarse sand) including curing and all sorts of carriages and cost of materials involved upto site of work complete.

Reinforced cement concrete work in columns, beams, plinth beams, girders, bressumers, cantilevers, suspended floors, lintels, roofs and staircases, including spiral staircases, landings, shelves, walls etc up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1:5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) including curing and all sorts of carriages from source to site of work complete:

Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood.

Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete. Mild steel and medium tensile steel bars. including all sorts of carriages and cost of material involved.

Centering and shuttering including strutting, propping etc. and removal of form work for suspended floors, roofs, landings, balconies and access platforms. (using 12mm ply)

Centering and shuttering including strutting, propping etc. and removal of form work for foundation footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers. (using 12mm ply)

Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls under 20cms wide

15mm cement plaster on rough side of single or half Brick wall of mix: 1:6 mix (1 cement : 6 fine sand) including curing and all carriages and cost of materials involved.

12mm cement plaster on rough side of single or half Brick wall / ceiling of mix: 1:4 mix (1 cement : 4 fine sand) including curing and all carriages and cost of materials involved.

Providing and laying of Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete. Including all carriages and cost of material involved.

P/ laying vitrified floor tiles of size (600x600mm) (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. including all sorts of carriages and costs of material involved

Providing and fixing panelled or panelled and glazed shutters for doors, windows, clerestory windows, including ISI marked M S pressed butt hinges bright finished of required size with necessary screws as per direction of EIC with 2nd class kail wood.(35mm thick)

Providing and fixing 35mm thick wire gauze shutters of 2nd class kail wood, using galvanized M.S wire gauze of average width for aperture 1:4mm with wire of dia 0.63mm for doors, windows and clerestory windows including ISI marked bright finished or / and black enameled M.S butt hinges with necessary screws.

Providing and fixing paneled or paneled and glazed shutters for doors / clerestory windows including ISI marked M S pressed butt hinges bright finished of required size with necessary screws, including paneling with 12mm thick laminated board, complete 35mm thick 1st class kail wood.

Providing and fixing of aluminium hardware fitting/ fixtures of standard make for doors and windows as directed by EIC.

Tower bolt 150mm

Tower bolt 200mm

Handle 150mm

Eye Hooks 125mm

Door stopper

Door spring

Slider bolt Aral 200mm

Structural steel works welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of approved steel primer all complete including all carriages and cost of material involved.

Providing and fixing of PVC rain water pipe 100mm dia including all carriages and cost of material involved.

Providing and fixing of Plain bend 100mm dia Complete.

Providing and fixing of PVC conduit 2mm thick of phenolex high power or equivalent make of 25mm dia.

Providing and fixing of deep box / fan box in slab complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) over and including priming coat with cement primer. Including all carriages and cost of material involved.

Finishing walls with exterior emulsion paint of approved brand and manufacture to give an even shade including priming coat with cement primer (two or more coats).(Apex/ Asian paint).

Painting with synthetic enamel paint of approved brand and manufacture of required shade and colour to give smooth finish with (two or more coats) on new works.

JHANGIR AHMED

NARESH GUPTA CONTRACTOR