Providing water supply facilities to Marriamman nagar and improvements to the road starting from Mill road to Over Head Tank at Kateri, Mannadipet Constituency

Amount

Code No.2.10.1.1: Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m - all kinds of soil - pipes,cables etc , not exceeding 80mm dia

Code No.31.160.1G: Providing, laying and jointing UPVC pipes (Finolex / Jain/ Supereme / Truebore / Nandi) (1Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying proper grade and alignment, testing of joints witth required testing equipment, including cost of solventt cement UPVC specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification - 75mm dia.

Code No.2.27D.1: Supplying and filling with gravel (excluding rock) in layers not exceeding 20cm in depth , breaking clods, watering ,rolling each layer with 1/2 tonne roller , or wooden or steel rammers , including all leads and lift etc., complete for making play fields , running trees and court yards

Code No.31.173.1B: Providing and fixing in position UPVC moulded saddle set (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 75 x 20mm dia

Code No.31.5.1A.1: Making connection of uPVC distribution branch with Upvc main of following sizes by providing and fixing tee including cutting the pipe etc.,compete.-63 mm dia to 90 mm dia nominal bore.

Code No.4.91B: Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth three wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum / gravel for screening and gravel for binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by manual means - Water bound macadam Gr-I with Gravel screening. (As per MoRTH specification, 4th Revision)

Code No.4.92C: Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth 3 wheeld steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum or gravel for screening and gravel for binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by manual means - Water bound macadam Gr-II with moorum or gravel screening. (As per MoRTH specifiication, 4th Revision)

Code No.6.1MO: Cleaning the existing W.B.M road surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and or compressed air to receive bituminous treatment. As per clause no 502.4.2 and 503.3.1 of MOST specification.

Code No.6.5F.1MO: Providing and applying tack coat on the prepared surface, heating bitumen in boiler and spraying the butumen with sprayset fitted on bituman boiler - on granular base such as WBM and WMM not bitument primed. Rate of application @ 10kg/10sqm.

Code No.6.11BMO: Providing and laying open graded premix carpet 20mm thick on prepared surface in a single course as wearing course composed or specified size of stone aggregates premix with a bituminous binder in mini hot mix plant 6 to 10 tonne laying manually and rolling with power roller 8 to 10 tonne but excluding cost of premer/tack coar. As per clause no 509 if MOST specification.

Code No.6.17MO: Providing and applying premixed seal coat type `B' comprising of thin application of fine aggregate premix with bitumen binder in mini hot mix plant, carriage manually of mixed material and laying and rolling with power roller 8 to 10 tonne. As per clause of 513 of MOST specification.