REPAIR TO ROOF TREATMENT, FALSE CEILING, TILING, SUNKEN PORTION TREATMENT AND ALLIED B/R WORKS IN CERTAIN BLDGS LOCATED NORTH AREA UNDER GE NASIRABAD.

Amount

Taking down existing unserviceable treatment of any description including cement plaster/cement concrete of any thickness from roof surface cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site up to 50mtrs complete all as specified and directed.

M&L for screeding 10mm thick in CM 1:4 on fair faces of RCC /stone patti roof surface finished fair & even without using extra cement, complete, all as spescified and directed.

M & L for five layered roof treatment with APP modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 micron high molecular high density polythylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3 Kg/ Sqm applied with bonding material using blown type bitumen Grade 85/25 @ 1.20 Kg/ Sqm over bitumen primer conforming to IS- 3384 @ 0.40 Kg/ Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg/ Sqm over APP membrane with all overlaps complete all as specified and directed.

Material and labour for 40mm thick (average consolidated thickness) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 0.6metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed.

M & L for coved filled in PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate at junction of roof and parapet wall / mumty / other vertical space and applying a coat of bituminous primer conforming to IS-3384 @0.30 litre/Sqm complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting of any gauge any thicknes complete all as specified and directed.

S & F 0.63mm thick galvanised, corrugated mild steel sheeting with grade of zinc coating 275gm/sqm & two corrugation side lap fixed with coach screws and washers in roofs etc. complete all as specified & directed.

Fixing only 0.63mm thick galvanised, corrugated mild steel sheeting with grade of zinc coating 275gm/sqm & two corrugation side lap fixed with coach screws and washers in roofs etc. complete all as specified & directed. NOTE: Old serviceable sheets retrieved vide Sl item no 6.00 here in before shall be reused.

S & F 0.63mm plain galvanised, mild steel sheeting, in ridges, hips, valley, gutters drip etc with grade of zinc coating 120gm/sqm complete all as specified & directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. Make :- Durashine of Tata Blue Scope and Dura Steel of Everest/JSW.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet, 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. Make :- Durashine of Tata Blue Scope and Dura Steel of Everest/JSW.

Dismantling of AC (corrugated, semicorrugated etc.) sheets of any thickness in roof coverings complete all as specified and directed.

S & F 6mm thick asbestos cement corrugated or semi corrugated sheets in roof fixed with 'L' type or 'J' type or cranked hook bolts complete all as specified & directed.

Fixing only AC (corrugated or semicorrugated ) as in roof coverings complete all as specified & directed. NOTE: Old serviceable AC Sheets retrieved vide Sl Item no 12.00 shall be reused.

M&Lfor asbestos cement two piece adjustable plain wing ridge 6mm thick complete all as specified & directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint (1st grade) over a coat of red oxide primer complete all as specified.

Dismantling existing unserviceable, PVC / RCC water tank of capacity n.exc 500 litre each & removing from site complete all as specified and directed.

Dismantling existing unserviceable, PVC / RCC water tank of capacity exc. 500 litre but n.exc 1000 litre each & removing from site complete all as specified and directed.

S&F 500 Litre capacity white color rotational moulded polyethylene water storage tanks, white colour, double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including disconnecting & taking down the existing unserviceable water tank, complete as specified in SSR Part-I.

S&F 1000 Litre capacity white color rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top), white colour, ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including disconnecting & taking down the existing unserviceable water tank, complete as specified in SSR Part-I.

M&L for 40mm thick sand stone slabs in base of water tank and set and cement mortar 1:4 over and including 25mm thick PCC 1:2:4 type B-0 (12.5mm graded aggreage) complete all as specified and directed

M&L for 50mm thick sand stone slabs in base of water tank and set and cement mortar 1:4 over and including 25mm thick PCC 1:2:4 type B-0 (12.5mm graded aggreage) complete all as specified and directed

Taking up or down steel tubing and connection 15mm bore keeping aside for reuse or removing to store complete all as specified and directed.

All as per item No. 23.00 here-in-before but 20mm dia

All as per item No. 23.00 here-in-before but 25mm dia

Supply and fix mild steel water tubing 15 mm dia galvanised medium grade including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid on floors including testing complete all as specified and as directed.

All as per item No. 26.00 here-in-before but 20mm dia

All as per item No. 26.00 here-in-before but 25mm dia

M & L for refixing only 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc complete all as specified and directed.

All as per item No. 29.00 here-in-before but 20mm dia

All as per item No. 29.00 here-in-before but 25mm dia

S & F in repair ball valves high pressure and of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20mm bore minimum weight 210 gms complete all as specified and directed.

S&F in repair gun metal high pressure globe or gate valve with iron wheel head screwed both ends for iron pipes of 25mm bore and fixed complete all as specified & directed.

Demolition of stone/brick masonry built in cement or cement lime mortar complete all as specified and directed.

M&L for stone walling of random rubble, uncoursed, well bonded, bedded & solidly hearted, built in CM (1:6) complete all as specified and directed.

All as per sl item no 35.00 here in before but except stone. NOTE: Old serviceable stones retrieved vide Sl Item no 34.00 shall be reused.

Extra over stone walling of random rubble, uncoursed for hammer dressing to face stones and dressing of face beds and joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 20mm complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping, bed block etc including weathering slightly, rounded or chamfered angles and throating as directed and including necessary form work complete all as specified and directed.

Taking down plaster on wall /ceiling of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick rendering in 1:4 on stone masonary wall surfaces finished fair & even complete all as specified & directed.

M & L for preparation of newly plaster surfaces of wall & applying two coats of cement base paint complete all as specified and directed.

Disconnecting existing tank of capacity exc 250 litre but not exc 500 litre, keeping aside (or lowering if required) for repairs, cleaning etc and hoisting it required, reconnecting and re-fixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Disconnecting existing tank of capacity exc 500 litre but not exc 1000 litre, keeping aside (or lowering if required) for repairs, cleaning etc and hoisting it required, reconnecting and re-fixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Supply only integral water proofing compound, ISI marked complete all as specified and directed.

Taking down eaves gutters and rain water pipe 110mm bore including all fittings complete all as specified and directed

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) 110 mm single juction (Single T) (equal or unequal) complete all as specified and directed.

M&L for 15 mm thick rendering in 1:6 on stone masonary wall surfaces finished fair & even complete all as specified & directed.

M&L for 10mm thick rendering in cement mortar (1:4) on ceiling surfaces finished fair & even complete all as specified & directed.

M & L for preparation of newly plastered surfaces of ceiling/Chajja. and applying three coat of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound (washable) distemper over & including one coat of chalk whiting complete all as specified & directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for non-skid ceramic coloured tiles, 7 to 8 mm thick ( square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in CM (1:6) & 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate complete all as specified and directed.

All as per Sl item no 54.00 here in before but on vertical surfaces of stone wall such as dados, skirting etc set & jointed in neat slurry and pointed in white cement mixed with pigments to match the shade of tile over & including 10 mm thick screed plaster in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 7-8 mm thick, area of tile exc 0.11 sqm but n.exc 0.18 sqm, set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles on vertical surfaces of wall such as dados, skirting etc over & including 10 mm thick screed plaster in CM 1:4 on stone masonry wall surfaces complete all as specified and directed by Engineer-in-charge.

M & L for vitrified ceramic tiles light shade 10mm thick (square / rectangular) polished area of each tiles n.exc 0.36sqm in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tile laid over and including screed bed 15mm thick in CM (1:6) & 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate complete all as specified and directed.

All as per Sl item no 57.00 here in before but on vertical surfaces of stone wall such as dados, skirting etc set & jointed in neat slurry and pointed in white cement mixed with pigments to match the shade of tile over & including 10 mm thick screed plaster in CM 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

M & L for cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in sunken floors filling and mass concrete complete all as specified and directed.

M&L for screeding 15mm thick in CM 1:4 mixed with water proofing compound on fair faces of concrete floor /stone masonary of wall surface finished fair & even, complete all as spescified and directed. NOTE: WPT will be measured and paid separately

M & L for two coats of bitumen blown any grade, applied hot to concrete surfaces at the rate of 1.5 Kg per sqm per coat and applying polythene film black, 50 micron laid in floors complete over sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.

S & F Vitreous China, wash down water closet pan (pedestal pattern), white, including plastic white seat cover closed pattern with flat bootm and mild steel chromium plated hinge device including connections to drain (or outgoing pipe) and to flushing pipe anti symphonage pipe etc complete all as specified and directed.

Taking out old unserviceable water closet (squatt pattern) and S & F Vitreous China, Squatting pan Orissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with chinaware ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing complete all as specified and directed.

Taking down old unserviceable flushing cistern S&F PVC valve less syphonic action type low level flushing cistern, 10 Ltrs capacity, white, with inlet ball valve, float and handle fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.

Taking down old unserviceable WHB and S&F wash hand basin vitreous china colour flat size 550 x 400mm complete all as specified and directed

S&F in repair stop/angle valve 15mm bore cast copper alloy, chromium plated, fancy type ISI marked with long shank & cup (concealed type) screwed down high pressure screwed both ends for iron pipe complete all as specified & directed.

Taking down old unserviceable PVC connection and S & F PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed

Taking down old unserviceable waste pipe and S&F 32mm bore, 75cm long with one end socketed with one PVC reducer complete all as specified and directed.

S&F in repair bib taps 15mm bore, fancy type, long nose, cast copper alloy, chromium plated with crtuch or butter fly handle, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repair pillar tap, fancy type, cast copper allloy, capston headed, chromium plated, screwed down, high pressure with long screwed shank and fly nut screwed for 15mm bore iron pipe complete all as specified & directed.

S & F in repair tubular towel rail, chromium plated brass 20mm dia ‘D’ type 60cm long between flanges complete all as specified and directed.

S&F in repair brass chromium plated shower rose of 125 mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

S&F in repair stop/angle valve 15mm bore cast copper alloy, chromium plated, fancy type ISI marked with long shank & cup screwed down high pressure screwed both ends for iron pipe complete all as specified & directed.

M & L for chequerred cement concrete tiles 25cm x 25cm x 22mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry in floors laid over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base to floor complete all as specified and directed.

M & L for machine pressed precast concrete interlocking tiles, reflective type, in path 60 mm thick, ISI marked, M-35 grade of approved quality laid over & including 50 mm sand cusion vibrated with mechinical vibrator complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover filletsS & F false ceiling with Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness(as per IS: 14862) of size 595x595 mm and any one of the desin (occeanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length, and 15x32mm made from 0.30 mm thick sheet, and cross "T" of size 15x32mm made of 0.30 mm sheet, spaced between main "T" at 600mm c/c to form a grid of 600X600mm and wall angle of size 15x20mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixures,smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin,etc with dash fasteners,GI adjustable rods of 3mm dia with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all height complete all as specified and directed. Make :- Everest / Armstrong.

S & F rolled mild steel framed work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including drilling for fixing of steel sheeting or other covering confirming to Fe-410W (Gde E-250) quality-A complete all as specified and directed

Dismantling single layer of Mangalore pattern or similar tiles in roofing including wooden fillet complete all as specified and directed

M & L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.

All as per sl item No 81.00 here in before but except roof tiles NOTE: Old serviceable roof tiles retrieved vide Sl Item no 80.00 shall be reused.

M & L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar (1:6) complete all as specified and directed.

M & L in repair for 2nd class hard wood plain fillets, square, rectangular in section of size exc 6 sqcm & n.exc 13 sqcm clean sawn, secured with nails or brads complete all as specified and directed.

M & L in repair for 2nd class hard wood plain fillets, square, rectangular in section of size exc 13 sqcm & n.exc 25 sqcm clean sawn, secured with nails or brads complete all as specified and directed.

Shree Sai Ram Enterprises

M/S JAGDISH PRASAD AIRUN

M/s SUNIL ENTERPRISES

M/S Nexus Projects

SHREE BALAJI TRADING CORPORATION

kirtiman traders

M/S SHIVA TRADERS