Repair and Maintanance of Pa.Vu.Sa Nagar MCC at Ward No 36 in Tirupathur Municipality

Amount

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Supplying and delivery of following Electrical Materials and specials including cost and conveyance and stacking at site store for pre measurements etc., completeCeiling Fan 1200mm (48'') SD 461

18 LED Tube light

4 Pole MCB

Single Pole MCB

2 Pole MCB

6 Amps Plug SD 247

20 Amps Plug sd 250

Repair and servicing of 10HP Motar with necessary specials complete as per standard specification

Painting two coats with ready mixed Plastic emusion of first qulity paint two coat and of approved colour over priming coat including through scrapping clean removal of dirt and , preparing the surface and curing etc., complete and including necessary plaster of paris ,Putty wherever required as per standard specification

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Conducting geophysical survey quality and quaintly test and transportation charges etc., (Rate as adoped by TWAD board)

Drilling of 150 / 180mm dia vertical bores in hard rock formation to any required depth as directed by the departmental officers including labour charges for inserting casing pipe, assembling in the drilled hole, including welding the joints if necessary grouting the casing pipe etc, and including transportation charges for the rig and supporting vehicles from one place to another place.

Supply and delivery of unplasticised ribbed screen PVC casing pipe of the 150mm dia in 3m length with screwed and socket end and centering guide for every 15m length of pipes as per IS / 12818 / 92 and as amended from time to time to suit the borewell upto 80m depth (C.S) with ISI marking including, loading, unloading , freight, stacking and transit insurance charges etc, complete.

Labour Charges for inserting PVC casing pipes of 150mm OD PVC Casing Pipes Assembly assembly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste etc. complete

Supply and delivery of wet type Submergible pumpset 2.00 HP as per IS 8034/1989 without Panel Board 2018-2019 20lpm x 150 mts Head Capacity as per std specification 96(18)

Supply and delivery of 4Sqm cable 3 core including cost and conveyance of materials etc., complete (Page No:114)

Supply and fixing of 63m dia HDPE pipes - PE 100 as per IS 4984/ 1995 for Submersible pump in Bore well class PN 6. The rate shall inclusive of all labour charges and freight charges etc, complete.

Supply and delivery of following Water Supply HDPE, GI & PVC Pipe Specials inculding cost and conveyance of materials etc., complete Nylon Rope

32mm GI Elbow

32mm GI Tee

32mm GI 1/2 feet Nipple

32mm GI 1 feet Nipple

32mm GI 2 feet Nipple

32mm GI 3 feet Nipple

32mm GI 4 feet Nipple

32mm GI Hex Nipple

32mm PVC Ball Valve

20mm Waste Not Tap

32mm Clamp Set

32mm Hose collar with clip

M.S Bore Cover

5 lever lock

Supply and run of 2 of 6sqmm84/0.30 PVC insulated Sc unsheathed cu conductor of 1100 on 7/20 GI bear wire for service conection main

Supply and delivery of Panel Board including cost and conveyance of materials cost etc., complete 2HP

Supply and delivery of Fuse Unit 32A including cost and conveyance of materials cost etc., complete

Supply and fixing of Meter Board 0.60 x 0.45 with bold and nuts including all labour charges etc., complete as per standard specification

Labour charges for Errection of submergible Pump set in bore well including fixing and jointing submergible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth values Errection clamps pressure gauges up to the exterior wall of pump room and errction of panel board consisting of TPICN switches starter volmeter ammeter three pilot indicator lamps complete and testing the pump set and trail run for 10 days up to 5 HP. (Page No:226)

Supply and delivery of 1000 lit capacity and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,complete as per standard specification.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

K MURTHY (BID ID -1206466)