Providing and fixing of street and building name boards at CLRI

Amount

Providing and fixing of Street and Building Name Boards at CSIR-CLRI Staff Quarters, Adyar, Chennai - 600020

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size).

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge,

Providing and fixing of retro reflective (3M-HIP) High Intensity Prismatic Reflective name boards made up of 3mm thick ACP Exterior grade (Make: AluDecor/Euro bond or equivalent) retro reflective sheeting any required size/shape, face to be fully covered with intensity encapsulated type heat activated retro reflective sheeting of kwalite/3M or equivalent make as per the required colour combination including subject matter, border,arrow,caution symbols any any other required symbols etc, all to be made as per the IRC guidlines etc., Fixing the same with SS bolt nut with waser, screws, as required ss flat beeding for outer frame of ACP board etc, all complete as per drawing specification and direction of Engineer-in-charge.Single/Double side. [The rate includes preparing of working drawing as required, subject matter , model letter size and template to be made as per the prior approval of the engineer-in-charge. If any spelling/subject matter mistake found in the board, it is be replaced with new one at the risk and cost of the contractor.Measurement will be taken for ACP sheet inluding subject matter only but not including metal frame]

SAIDEEP CONSTRUCTIONS

M PADMANABHAN

GRM ENTERPRISES

SMA INFRAA PROJECTS

shakeel arts and advertisers

K ANTONIAMMAL