REPAIR/REPLACEMENT AND

Amount

Taking down carefully the existing point wiring of any size/capacity and type by disconnecting from the terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings etc by unscrewing and removing from site complete all as specified and directed by engg-in-charge. Note :cost of unserviceable materials will be charged from the contractor against schedule of credit.

M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated un sheathed multi stranded copper conductor,FRLS 1100 Volts grade, with non metalic rigid PVC medium grade duty conduit/casing capping on wall/roof for surfacing wiring but not less than 20mm dia with accessories such as junction boxes, bends, tees etc. of suitable size including sunk cast iron or pressed steel terminal box for mounting switches, sockets fan regulators etc with 3 mm thick plastic laminated sheet top cover including continuous earth wire PVC insulated 1.50 Sq mm multi stranded copper conductor, FRLS 1100 Volts grade, connecting to common earth and earth dolly for One light /bell/fan point controlled by one 1 way switch

All as per Item No 2 above One three pin switch socket 5 Amps plug point on independent board

All as per Item No 2 above One three pin switch socket 5 Amps plug point on same board

All as per Item No 2 above One bell/buzzer point controlled by one bell push on independent board

All as per Item No 2 above One light point controlled by two 2-way switches, with cables 1.5 sq. mm size including continuous earth wire PVC insulated 1.5 Sqmm single core multi stranded copper conductor connected to common earth dolly.

All as per item No 2 above point wiring with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps Switch including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly.

M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC sheathed FRLS cable, 1100 volts grade IS-694 marked, with multi strandad copper conductors and earth continuity wire with similar 1.5 sqmm cable (incl connecting to earth dolly) concealed in wall including PVC conduit size of not less than 20mm and fittings/accessories all fixed to the surface of walls/ceiling, and also incl sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers for the following One light /bell/fan point controlled by one 1 way switch :- (Note : Cost of for cutting chesing and making good to disturbed surface all as to match with existing surface are deemed to be included in quoted rate.) etc complete all as specified and directed by Engr-in-Charge.

All as per item No 8 above One socket out let 5 Amps 5 pin on independent board

All as per item No 8 above One socket outlet 5 Amps 5 Pin on same board with other switches

All as per item No 8 above One bell/buzzer point controlled by one bell push on independent board

All as per item No 8 above point wiring with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps Switch including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly.

All as per item No 8 above point wiring with 4 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps switch including continuous earth wire PVC insulated 4 Sqmm single core multi stranded copper conductor connected to common earth dolly.

Supply and fix in replacement Switch Piano, Flush Button, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed.

S&F in replacement of switch piano, flush type, 15 amps, single pole, one way suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of socket outlet 2in1, 3 pin 5 Amps flush type suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of socket outlet 2in1, 3 pin 15/5 Amps flush type suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement ceiling rose surface type bakelite 65 x 50 mm with three terminals with ISI mark etc complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement lamp holder PVC/Poly Carbonate type suitable for batten fittings with ISI mark etc complete all as specified and directed by Engr-in-Charge.

S&F in replacement Bell push flush type 5 Amps etc complete all as specified and directed by Engr-in-Charge.

S&F in replacement steped type electronic fan regulator heavy duty flush type socket size on th existing phenolic laminated sheet etc complete all as specified and directed by Engr-in-Charge.

S&F in replacement of call bell, Ding dong type, suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 100 lumen/watt, 3000/6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge. Make: Halonix Cat No -HLB-03-20-CW-AL/Philips/Crompton

Supply and fixing in repair wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,10 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round blocks and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix Cat No -HLB-03-10-CW-AL / Philips/Crompton.

Supply and fixing in repair MOD ROUND-SURFACE mounting LED ultra slim round down lighter made of PDC AL with high efficient LEDs & Glare free opal diffuser IP20, 9 watt, 6500/3000 K ,230 volt, LED ceiling fitting, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix Cat No-HLDLS-R06-09-CW/Philips/Crompton.

Supply and fixing in repair wall mounted LED bulk head fittings, 10 watt, 2700/6000K,, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix Cat No- HLBH-02-10-CW/Philips/Crompton Greaves.

Supply and fixing in repair LED cabinet light fittings, 3 watt, 3000/6500K,, 230 Volts, (SMD Type) complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: SYSKA Cat No SSK-SM-R-3W/Philips/Crompton Greaves.

Supply and fixing in repair wall/ceiling mounted LED Bush light fittings with die cast aluminium housing with toughened glass. IP66 , 3/6 watt, 2700/6000K,, 230 Volts, diffused optics ,etc complete with all accessories and as directed by the Engineer-In- Charge. Make: Halonix Cat No- HLOBUL-02-03-CW/Philips/Crompton.

Supply and fix in replacement of ceiling light with 9 watt recessed mounted round LED Downlights with PDC aluminium body heat dessipation and high transmittance diffuser 3000/6000K including fixing in ceiling/POP for suitable of LED light fitting and make good complete all as specified and directed by engineer-in-charge. Make :- Polycab Cat No LD00125031 / Philips/CG.

Supply and fix in replacement of ceiling light with 18 watt recessed mounted round LED Downlights with PDC aluminium body heat dessipation and high transmittance diffuser 3000/6000K including fixing in ceiling/POP for suitable of LED light fitting and make good complete all as specified and directed by engineer-in-charge. Make :- Polycab Cat No LD00125037 / Philips/CG.

Supply and fix in replacement of ceiling light with 24 watt recessed mounted round LED Downlights with PDC aluminium body heat dessipation and high transmittance diffuser 3000/6000K including fixing in ceiling/POP for suitable of LED light fitting and make good complete all as specified and directed by engineer-in-charge. Make :- Polycab Cat No LD00125039/ Philips/CG.

Supply and fixing LED Panel lights - 2x2 , 36 watt, 6000K,, 230 Volts, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: SYSKA Cat No SSK-TVP-6060-36W/Philips/Crompton Greaves.

S & F in replacement of 10 watt LED focus light decorative type light fitting fixed on wall with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed by engineer-in- charge.

S&F in replacement fan capacitor 2.5 Mfd

S&F in replacement fan capacitor 3.15 Mfd

Supply & fix in replacement metal clad socket single pole and neutral sheet metal enclosure with and 20A earth plug and socket complete with one single pole MCB 20 amp 240 Volts all as specified and directed.

Supply & fix in replacement metal clad socket three pole and neutral sheet metal enclosure with and 32A earth plug and socket complete with one three pole MCB 32 amp 415 Volts all as specified and directed.

M & L in replacement sheet metal enclosure with double door category of protection type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB SPN 240 Volts, 2 way concealed in wall such as front cover shall be seen flush with the wall surface all as specified and directed by Engr-in-Charge.

All as per item No 38 above 4 way

All as per item No 38 above 8 way

All as per item No 38 above 12 way

M & L in replacement sheet metal enclosure with double door category of protection type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB TPN 415 Volts, 4 way concealed in wall such as front cover shall be seen flush with the wall surface all as specified and directed by Engr-in-Charge.

All as per item No 42 above 8 way

All as per item No 42 above 12 way

S&F in repairs MCB Triple pole and neutral 63/100 Amps working on 415 volts 50 Hz AC supply,10 KA C series.

S&F in repairs MCB single pole and neutral 32/40 Amps working on 240 volts 50 Hz AC supply,10 KA C series including taking out old one.

S&F in repairs MCB single pole 6 to 32 Amps working on 240 volts 50 Hz AC supply,10 KA C series.

S& F in replacement sub main wiring with two single core PVC insulated unsheathed cable 1100 volts FRLS grade with multi strand copper conductor and drawn through and including PVC conduit along with continuous earthing wire but in green colour complete on surface/concealed and connected to common earth dolly of the following size. Note : Three run of PVC cable and one run of PVC conduit shall be measured as one unit length. (a) 4 Sqmm ( 2 single run of 4 Sqmm and one run of 4 Sqmm as earth wire)

(b) 6 Sq.mm ( 2 single run of 6 Sqmm and one run of 6 Sqmm as earth wire)

(c) 10 Sq.mm ( 2 single run of 10 Sqmm and one run of 10 Sqmm as earth wire)

(d) 4 Sq.mm ( 4 single run of 4 Sqmm and one run of 4 Sqmm as earth wire) Note:- Five run of PVC cable and one run of PVC conduit shall be measured as one unit length.

(e) 6 Sq.mm ( 4 single run of 6 Sqmm and one run of 6 Sqmm as earth wire) Note:- Five run of PVC cable and one run of PVC conduit shall be measured as one unit length.

Supply and fix in replacement LED Candle Bulb 03 watt Pin type W/W. Make SYSKA Cat No-SSK-PAC-3W/Havells/Wipro

Supply and fix in replacement LED Bulb 07/09 watt thread type 3000k/6500k .

Supply and fix in replacement LED Bulb 07/09 watt pin type Warm white.

S&F in replacement modular Switch, 5/6 Amps , 1 module,complete all as specified and directed.

S&F in replacement modular Switch, 5/6 Amps , 1 module,two way complete all as specified and directed.

S&F in replacement modular socket outlet , 6 Amp, 2/3 pin combined, 2 module complete all as specified and directed. Make : Crabtree/Legrand/Havells

S&F in replacement modular Switch, 16 Amps , 1 module,complete all as specified and directed.

S&F in replacement modular socket outlet , 6/16 Amp, 2/3 pin combined, 2 module complete all as specified and directed.

S&F in repairs modular white cover plate with frame 1 module

S&F in repairs modular white cover plate with frame 3 module

S&F in repairs modular white cover plate with frame 4 module

S&F in repairs modular white cover plate with frame 8 module

S&F in repairs modular metal flush box frame 1/2 module

S&F in repairs modular metal flush box frame 3 module

S&F in repairs modular metal flush box frame 4 module

S&F in repairs modular metal flush box frame 8 module

S&F in repairs fan regulator 120W,-2 module modular type

Supply and fixing in replacement PVC gang box suitable for one switch 5 Amps with screw and necessary arrangement complete all as specified and as directed by Engineer in Charge.

All as per srl item No.70 above but for one 15 amps switch socket outlet complete all as specified and as directed by Engr-in-Charge.

M & L for rigid non metalic PVC medium grade conduit in repairs including junction boxes, tee, bends, elbows, reducers bell mouth tube ends,fixing accessories such as couplers, lock Nuts, saddle pipe hook etc for 25 mm dia.ISI Marked complete all as specified and as directed by Engineer-in-charge.

M & L in repairs for PVC casing caping medium grade including, tee, bends, elbows, ends,fixing all accessories etc for 20 mm . ISI Marked complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in deep for foundation of pole/stay/cable etc and getting in soft/loose soil complete all as specified and as directed by Engineer-in-charge

Returning/ refiling including spreading, leveling, watering and well raming in layers each not exceeding 25 cm thickness complete all as specified and as directed by Engineer-in-charge.

Removing surplus spoil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge.

M&L for sand and cushioning for under ground cables provided with a layer of sand 8 cm deep before laying the cable and 15 cm depth after punning down and stretching the cable all as specified and directed by engineer-in-charge.

Supply and lay in repair well burnt as class ‘B’ bricks as mechanical protection to under ground cables laying with length of the bricks equal to the width of the trench all as specified and directed by engineer-in-charge.

Supply and laying GI tubing light grade of size 80 mm dia with all fitting for protecting the cables in tranches,floors,on poles,in walls complete all as specified and as directed by Engr-in-Charge

All as per item No 79above but with size 40 mm dia.

Supply,laying, jointing,testing in replacement LT cable 1100 volts grade, PVC insulated armoured and PVC sheathed with stranded aluminium conductor heavy duty, including cable glands, cable lugs etc. to suit the cable size, laid in trenches, fixed along the poles bare or through G.I. Pipe laid under floors road etc; fixed concealed in walls encased in G.I. Pipe etc. complete of following sizes:- a) LT Cable 10 Sq mm, 2 core

b) LT Cable 25 Sq mm, 4 core

c) LT Cable 35 Sq mm, 3.5 core

d) LT Cable 70 Sq mm, 3.5 core

e) LT Cable 95 Sq mm, 3.5 core

f) LT Cable 185 Sq mm, 3.5 core

g) LT Cable 400 Sq mm, 3.5 core

Supply & Fix in replacement of LED Post Top Lantern 25 watt with die cast aluminium spigot, spun aluminium powder coated top cover, Aluminium PDC heat sink, opal PC diffuser and clear arcylic. IP65, Optics: PC lenses with Toughened Glass, electronic driver with input voltage range of 170 to 280V. Make Halonix Cat No- HLPT-04-25-CW/Philips/Bajaj.

M&L for preparation of old painted surface of steel tubular swaged poles (9 to 11 meter long) with swan neck brackets including junction box and painting with one coat of aluminium paint including painting with black colour paint in alternate strip to 1.5 mtr height from top of PCC coping and marking pole numbers with one coat of synthetic enamel paint and fixing of reflector tape 50 mm wide in alternate layer in three Nos per pole using red and yellow coloured reflector tape of superior quality complete all as specified and as directed by Engineer-in-Charge.

Preparation of old painted surface of steel tubular swaged poles (3 to 5 meter long) with swan neck brackets including junction box and painting with two coat of aluminium/black paint as per existing including all fittings/fixtures of superior quality complete all as specified and as directed by Engineer-in-Charge.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm, burried vertically in ground ( earth pit not less than 2.25 m deep below normal ground level) with top edge of plate vertically to a depth not less than 1.5m below ground level, connected to galvanised steel earth lead wire 4.00 mm dia ( 8 SWG) of any length as reqd at site, by means of bolts, nuts, check nuts and washers of galvanised steel, earth lead wire encased in and including 15mm bore G.I. light grade pipe from earth plate upto pole, upto 2.40 M height from GL by means of and including 25 x 3 mm M.S.F.I. Clamps, bolts, nuts and washers etc. and GI Earth lead wire poles/feeders, gang operated air break switches etc. with provision of charcoaldust and common salt packed all around the earth plate, including necessary excavation and earth work in any typeof soil/strata and testing complete all as specified and directed and shown on electrical plate No. 5 of SSR Part I (1991). Note:- GI Wire more than 7.5 m will be measured separately complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement PVC FRLS Flexible cable copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 2.5 sqmm.

Supply and fixing in replacement of FRP cable junction boxes including bus bar (04 Nos) of existing size including provision for fixing to existing poles with 02 Nos MS clamps of flat 40x6mm suitable size complete with nuts & bolts making connection with cable & including thimbles at suitable size complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement to street light bracket of 1.5mtr long made out of 40mm dia medium grade GI pipe bend to shape at 120 degree & welded at required end including 02 Nos MS clamps of Flat iron 40x6mm complete all as directed by Engineer-in-Charge.

Taking down carefully ceiling fans of any size for repair/service/rewinding/greasing and refixing in its original position after necessary repair/rewinding/servicing/greasing etc including connecting up with flexible twin core cable 23/0.0076 from ceiling rose or connector to fan complete and to ensure that ceiling fan should be fix in position in all respect all as directed by Engineer in Charge.

All as per item no 95 above but Exhaust fan.

All as per srl item 95 above but for wall mounted fan/ pedestal fan.

Hanging/fixing only ceiling fan of any sweep and make after necessary repair/rewinding etc including connecting up with flexible twin core cable 23/0.0076 from ceiling rose or connector to fan complete all as directed by Engineer in Charge.

All as per item No.98 above but Exhaust fan of any sweep.

All as per item No.98 above but wall mounted fan/ pedestal fan.

M&L for Rewinding of ceiling fan of sweep 1200mm/1400 mm sweep of any make and model with super enameled copper winding wire of same size as per old winding wire and confirming to relevent IS including replacement of insulation material, varnishing, greasing and lubricating, ball baring, GM bushes and replacement of suitable capacity of condenser and testing complete all as specified and directed by Engineer in Charge.

M&L for rewinding of exhaust fan of 12" (300mm) sweep with super enamelled winding wire of same size as per old winding wire and confirming to IS including replacement of insulating material, warnishing, greasing lubricating, ball bearing, GM bushes and replacement of suitable capacity of condenser and testing complete all as specified and directed by Engineer in Charge.

All as per item No 102 above but size of exhaust fan 380/450 mm sweep

All as per item No102 above but wall mounted fan/ pedestal fan.

M & L for repair to ceiling fans of 1200 mm / 1400 mm sweep by replacing unserviceable ball bearing No 6201/6202/6203 and suitable capacity of condenser including necessary greasing to the bearings complete all as specified and directed by Engineer-in-Charge.

M & L for repair to exhaust fan/ wall mounted fan/ pedestal fan of of any size by replacing unserviceable ball bearing No 6201/6202/6203 including necessary greasing complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of condencer capacity 4 mfd for exhaust fan/pedestal fan/air circulator fan of any sweep and make complete all as specified and directed by Engineer in Charge.

S&F in replacement of rubber real for ceiling fan complete all as specified and directed by Engineer in Charge.

S&F in replacement of mild steel U clamps including 10 mm dia but, nuts, washers and split pin for ceiling fan complete all as specified and directed by Engineer in Charge.

S&F in replacement of mild steel fan hook made out of 12 mm dia mild steel round bar of suitable size as per existing hook as directed by Engineerin Charge.

S&F in replacement of upper louver conopy of ceiling fan of any sweep, make, modles & size as per existing complete ass as specified and directed by Engineer in Charge.

S&F in replacement of exhaust fan heavy duty 300 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of ceiling fan heavy duty 1200 mm sweep including necessary fixing arrangement for proper fixing/hanging as per site requirement complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of exhaust/ventilating fan heavy duty plastic body 250 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of wall mounting fan heavy duty 450 mm sweep including necessary fixing arrangement for proper fixing on wall as per site requirement complete all as specified and as directed by Engineer-in-Charge.

Cutting of existing surface/wall for making hole suitable for fixing of exaust fan of required size including 04 Nos mild steel hold fastner and making good the disturbed surface all as specified and as directed by Engineer-in-Charge.

M& L for cleaning of dust, greasing of bearings and painting of ceiling fans with blades and canopys with two coats of super enamelled paint by spray gun machine after filling of cavities with filler, including numbering with black letters complete all as specified and as directed by Engineer-in-Charge. Note: All required Materials are deemed to be included in the unit rate quoted.

M& L for cleaning of dust, greasing of bearings and painting of exhaust fans with blades with two coats of super enamelled paint by spray gun machine after filling of cavities with filler, including numbering with black letters complete all as specified and as directed by Engineer-in-Charge. Note: All required Materials are deemed to be included in the unit rate quoted.

S&F in replacement of blade suitable for existing ceiling fan any sweep and make including testing of ceiling fan complete all as specified and directed by Engineer in Charge.

All as per item No 119 but for wall mounted fan complete all as specified and directed by Engineer in Charge.

S & F in replacement of exhaust fan louver at any size and make all as specified and directed by Engineer in Charge.

S & F in replacement of down rod made out of GI pipe medium grade, 15 mm dia with fan clamp incl drilling cutting threading etc all as directed for ceiling fans 1200/1400 sweep of following sizes a) 2 ft long

b) 2 .5 ft long

c) 3 ft long

M & L for PVC three core sheathed cable with stranded copper conductor of size 0.5 sqmm etc complete all as specified and directed by Engineer in Charge.

Terminal connector 3 way of bakelite

Disconnecting and taking down the defective / unserviceable DC wiring and rewiring with same size of cable including supply and replacing of complete wire with flexible pipe, control cable including testing complete for following capacities of DG Set complete all specified and directed by engineer- in- charge :- (a) 250 KVA DG Set.

(b) 125 KVA DG Set.

Supply and fixing in replacement of following spares for ‘B’ check of following capacities of DG sets:- (a) 250 KVA DG Set (i) Lubricating oil filter with ‘O’ ring

ii) Lubrication by pass filter with rubber washer

iii) Inobirated Corrosion

iv) Element fuel filter

v) Element air cleaner outer

vi) Element air cleaner inner

vii) CR Plates

viii) Diesel Filter

ix) Air filter – Inner

x) Air Filter-Outer

xi) fule pipe

(b) 125 KVA DG Set i) Lubricating oil filter with ‘O’ ring

ii) Lubrication by pass filter with rubber washer

iii) Inobirated Corrosion

iv) Element fuel filter

v) Element air cleaner outer

vi) Element air cleaner inner

vii) Diesel Filter

viii) Air filter – Inner

ix) Air Filter-Outer

x) fuel pipe

xi) Ignition switch

xii) Batery terminal leads with copper lugs

xiii) Batery 12 Volt, DC, 180 AH for DG Sets

Supply only in Coolant green of best grade/quality in sealed packing complete all as specified and complete by Engineer-in-Charge.

Supply only distilled water of best quality in 05 ltr sealed gallon packing complete all as specified and complete by Engineer-in-Charge.

Supply only in replacement of Engine oil 20w50 / 10w30 complete all specified and directed by engineer- in- charge.

M/S LADPURIA ENTERPRISES

shakti construction

M/S MG GROUP

CHAUHAN ENTERPRISES

J.P. Enterprises