Signalling work in connection with "Track Renewal works of Daund-Wadi TBR, Kurduwadi-Latur TBR & Turnout deep screening" in Solapur Division of Central Railway."

02-SOR EXECUTION

03-NS SUPPLY AND EXECUTION

Item Breakup - 01-SOR SUPPLY

10.00 (No.RSSK 3515/19) or functional equivalent without base plates. ( Inspection by RDSO ) SOLAPUR DIVISION-S AND T/CENTRAL RLY

10.00 (No.RSSK 31/0001) or functional equivalent without base plates. ( Inspection by RDSO )

100.00 relay, 8F-8B, 24 VDC along with plug, board, retaining clip and connectors conforming to BRS:930, IRS:S60/78 with Amendment no.1 , IRS:S34/68 with Amendment no.6 & IRS:S23/88 with Amendment no.1 ( Inspection by RDSO )

20.00 pick up, 8F- 4B along with plug, board, retaining clip and connectors conforming to BRS:933 IRS:S60/78 with Amendment no.1 , IRS:S34/68 with Amendment no.6 & IRS:S23/88 with Amendment no.1) ( Inspection by RDSO )

20.00 9 Ohm, 2F.1B, along with plug, board, retaining clip and connectors conforming to BRS:939A, 966 & Appendix F2, IRS:S34/68 with Amendment no.6 & IRS:S23/88 with Amendment no.1) ( Inspection by RDSO )

10.00 2F-2B, contacts, 9 ohms. Complete with plug, board, retaining clip and connectors as per RDSO/SPN/84 Ver. 2.0 with Amendment No.1 or latest. ( Inspection by RDSO )

100.00 2FHD 4F-4B, 24VDC along with plug board, retaining clip and connectors conforming to BRS:943 POINT CONTACTOR RELAY. And RS S46/74 with Amendment No.1 & firms specification. ( Inspection by RDSO )

100.00 6B along with plug board, retaining clip and connectors conforming to BRB:935A. ( Inspection by RDSO )

2.00 61649.00 UFSBI system to work on back up media (either VF channel on OFC P/Mux or 2 Mbps E1 channel from STM or direct dark single mode optic fibre cable upto 30 km distance. ( Inspection by RDSO )

20.00 Goods warning Board (SK-784) RDSO Drg No. SA 2380 (Adv), SA 2370/M-, Block section limit Board RDSO Drg No. SA 2373 - Paint and retroreflective arrangement as per Railways drawing. ( Inspection by Consignee )

100.00 made of PBT Specn No.IRS/75/2006 (Rev - 2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4., SA-23745 Alt.5, SA-23746, SA-23748 Alt.4, & SA-23756 Alt.3. ( Inspection by RDSO ) SOLAPUR DIVISION-S AND T/CENTRAL RLY

100.00 as per RDSO Drg No SA-23748 Alt 4, SA- 23749 & Spec No.IRS S 75/2006 Rev.02 with latest amendment. Fuse block shall be suitable for round head type voltage fuses. ( Inspection by RDSO )

200.00 type low voltage cartridge fuse as per specn No. IRS/S/78/92 with latest amendments - 2A/4A/6A capacity ( Inspection by RDSO )

5.00 14252.00 locks with detachable handle on both the doors.a) Single Case as per Drg No SK 783- 1 & 2. with latest alteration. ( Inspection by RITES )

5.00 11287.00 locks with detachable handle on both the doors. b)Half Case as per Drg No SK 783-1 & 2. with latest alteration. ( Inspection by RITES )

10.00 Drg.No.CR/S&T/SK-815 ( Inspection by Consignee )

200.00 C.Rly Drg.No.RST 11509 made from fiber glass alongwith terminal blocks. ( Inspection by Consignee )

of specn.No.IRS.S.65/83 (Amd.3 ) with latest amendments. ( Inspection by RDSO )

200.00 disc type 7.5/15/30 ohms as per RDSO Drg. No. SA 20161-66/M (Adv) with latest amendments ( with phenolic moulded base). ( Inspection by RDSO )

5000.00 galvanised, 7 mm suitable for 4mm dia bonding wire as per spec No. IRS: S 17-75 Revision 3. ( Inspection by Consignee )

10000.00 lead connections. PVC jacketed wire rope should be of Galvanised steel wire rope 6mm dia (6x19 stranded wire with steel core of 6 mm dia) sheathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1984 Reaffirmed 2001 and steel wire rope as per IS: 2266:2019. Reclaimed for recycled material should not be used. ( Inspection by Consignee )

5000.00 for track circuit rail bonding. As per IRS Specification S:13-62 ( Inspection by Consignee )

of William insulation set suitable for ground connection as per RDSO drg No T-10367, T- 10368, T-10384 as applicable and to the spec IRS S 23/88 with Amendment No.01 &

amendments. ( Inspection by Consignee ) SOLAPUR DIVISION-S AND T/CENTRAL RLY

300.00 insulation set consisting of one inlsulating plate as per Drg no: RST-106961 & 3 nos of Ferrules with collars to suite rodding supplied as per RDSO spec & Drg.no: RST- 10692 ( Inspection by Consignee )

300.00 as per RDSO drg No: T-10372 Alt2, T- 10368, T-10371 Alt2, T-15083/88/Alt2 & T- 11690/Alt2 and to the spec IRS S 23/88 with Amendment No.01 & 40/84 with Amendment No.01 or latest amendments. ( Inspection by Consignee )

30.00 class as per spec. No.IS 1239 PT. 1/2004 or latest with sockets and fittings. TATA/JINDAL/ZENITH BIRLA make. ( Inspection by Consignee )

600.00 coupler and 'O' ring fire resistant, anti rodent, in 6 meter length of size 120 mm outer dia as per RDSO/SPN/204/2011 Ver 1.1 with Amd.1 or latest. ( Inspection by Consignee )

1000.00 150mm dia outer and 100 mm dia internal 1 mtr long matching to IS No.458/2003 amendment-1 with Rev.4. ( Inspection by RITES )

1000.00 mm dia outer and 250 mm dia internal 1 mtr long matching to IS No.458/2003 amendment-1 with Rev.4. ( Inspection by RITES ) Total 5633293.00

Item Breakup - 02-SOR EXECUTION

and laminated/Fibre glass sheet in location box by providing all fixtures as per Railway Drawing including fixing of PVC coated/with PVC pipe covered string rods at the back side for cable support with contractor's own materials. The work shall be done as per drg and arrangement similar to SK 783- 1& 2. with latest alterations & as per instructions of Rly engineer at site. a) Single Case

and laminated/Fibre glass sheet in location box by providing all fixtures as per Railway Drawing including fixing of PVC coated/with PVC pipe covered string rods at the back side for cable support with contractor's own materials. The work shall be done as per drg and arrangement similar to SK 783- 1& 2. with latest alterations & as per instructions of Rly engineer at site. b)Half Case

1500.00 phenolic laminated sheets and fixing by Conductor stainless steel/brass nuts & bolts. This includes provision of two additional holes on the board on either side for cable conductor entry. SOLAPUR DIVISION-S AND T/CENTRAL RLY

3000.00 terminal/fuse blocks in the apparatus Conductor cases/ cable termination rack. This includes all associated works of pulling out the cable from underground. The work shall be done as per location plans and instructions of Rly engineer at site.

5.00 foundation with contractors Anchor bolts, cement, ballast and other materials. The required scaffolding ferma etc for Casting of foundation will have to be brought by the contractor at his own cost. i) Single Case as per Drg No SK-803

5.00 foundation with contractors Anchor bolts, cement, ballast and other materials. The required scaffolding ferma etc for Casting of foundation will have to be brought by the contractor at his own cost. ii)Half Case as per Drg No SK-804

5.00 filling of location foundations and plastering .i)Single Case

5.00 filling of location foundations and plastering. ii)Half Case

5.00 chargers batteries etc. as applicable) & wiring of the same in apparatus cases as per location diagrams & circuit diagrams, as per Instruction of site incharge and practice. i) Single Case

5.00 chargers batteries etc. as applicable) & wiring of the same in apparatus cases as per location diagrams & circuit diagrams, as per Instruction of site incharge and practice. ii)Half Case

10.00 per Drg.No.RE/S&T/SIG/Tender/SK726/85 including earth wire connected through GI wire 8 SWG supported on M.S. flat of size 6mm x 40 mm to earth electrode as per drg. No.CR/S&T/SK-815 for sigg. Equipment such as lever frames, apparatus case, signals, relay racks, block instruments, and etc. as per RE manual. The earth value should be less than 10 Ohms including the lead wire. The value should be measured in presence of Rly. supervisor. It should be documented and painted on earth enclosure made of concrete.( only earth electrode will be supplied by Railway). All other material required for provision of earthing will be brought by the contractor.

200.00 Track Lead juntion Box on two supports (M.S.angle) with contractor's fixing material and PVC jacketed wire for track lead connection including angles of size 40x40x5mm 1200mm length. This will include drilling of holes for track lead/side connections of rail. The work shall be carried out as per Drg. No.SK-845 or / & instructions of Rly engineer at site. SOLAPUR DIVISION-S AND T/CENTRAL RLY

200.00 jacketed wire rope for Track Lead connections. PVC jacketed wire rope should be of Galvanised steel wire rope 6 mm dia (6x19 stranded wire with steel core of 6mm dia) sheathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1984 Reaffirmed 2001 and steel wire rope as Per IS:2266:2019. Reclaimed or recycled material should not be used. This will include drilling of 7.1mm dia holes in rails (4 Nos) and provison of two jumpers for each bond, clipping of bonds etc. with contractors own materials and tools as per instruction of Rly engineer at site.

200.00 (8 SWG) for track jumper & fish plate joints bonds. This will include drilling of 7.1mm dia holes in rails (4 Nos) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own tools as per instruction of Rly engineer at site.

500.00 route plan, 1.0 mt. deep and 300mm wide along side the track in normal soil/strata, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid to trench by loose soil for a layer of 50mm thickness after clearing of route, bushes e t c . It shall be ensured that top of the cables laid is at a depth of 0.8 m or more. If it is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions, proportionate payment will be made as per procedure. The work shall be done as per extant practice on C.Rly & the instruction of Railway engineer at site. Drg No SK 805

200.00 route plan, 1.0 mt. deep and 300mm wide along side the track in hard soil, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid to trench by loose soil for a layer of 50mm thickness afer clearing of route, bushes e t c . It shall be ensured that top of the cables laid is at a depth of 0.8 m or more. If it is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions, proportionate payment will be made as per procedure. The work shall be done as per extant practice on C.Rly & the instruction of Railway engineer at site. Drg No SK 805 SOLAPUR DIVISION-S AND T/CENTRAL RLY

20.00 (except concrete type) for trenching and excavation to depth of 300mmx300mm wide approx. and refilling after laying of RCC/GI/DWC pipe & to restore them to original condition. The work shall be done as per extant practice on C.Rly & the instruction of Railway engineer at site. Drg No SK 807

30.00 bridges etc. and concreting of ends with brick masonry at both ends as per the instruction of Rly engineer at site.

20.00 flange/road level (for LC) and, 0.3 Mtr to 0.6 Mtrs wide and back filling after placing of DWC/RCC/GI pipe. (Placing of DWC/RCC/GI pipe coverd separately). The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. Drg No SK 806

2000.00 / RCC Half round pipes in trenches at places of track and road crossings, platform cutting etc.

16.00 various cores/sizes in trenches.

20.00 not feasible, cable shall be protected as u n d e r : - Preparation of cement mixture 1:3:6 with contractor's own materials and spreading cement concrete mixture layer of 100 mm thick over the already laid cables in the excavated trench."

280.00 2.0 Mtr depth along with laying of 120mm HDPE pipe for track crossing with minimum depth reckoned from bottom of the rail/Road crossing with minimum depth reckoned from ground level. The work shall be done as per extant practice & instructions of site engineer. Preparation of site for Horizontal Boring shall be carried out in presence of Railway Representative. HDPE will be supplied by Railway. Note:- Contractor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable.

37.00 machine through bend pipe this includes preparatory work of pulling the cables, and peeling out the insulation, dressing and lacing after termination etc., pulling of tail cable as per circuit requirement inside point machine through bend pipe, termination of cables on terminal blocks as per instruction of site supervisor the cable shall be entered in such a way that, armouring shall protect the cable near sharp edge of entry point and armouring shall be clamped between pipe fixing bracket and boy of point machine. SOLAPUR DIVISION-S AND T/CENTRAL RLY

5.00 consisting 1) Digging of pit, cleaning of earth from all sides, breaking of seal of location boxes removal of sand from location, marking of new cable holes. 2) insertion cable from ground 3) making place for cable termination in old location, shifting ARA, fuse etc after removal and termination including fixing of ARA. 4) Termination of cable in old location. 5) Filling of sand and plastering to all sides upto 50 mm below ground level."

5.00 from existing location box to New location box. The work include breaking/dismantling of existing foundation of locations, excavating and removing / segregating coils of this cables which may be of about 10 mtr in length. These cables are then to be disconnected and removed from the existing locations one by one as per the instructions and under the supervision of railway staff present at site. The cable is then to be inserted and terminated in new location box. The item includes neatly dressing of cables marking wiring tree etc. The material required for dressing / lacing will be arranged by contractor at its own cost. The work is required to be done systematically and with due precaution during the night block of 2.00 - 2.30 hrs each or within the time that may be allowed. The excavation work to be done carefully without damaging the cables to avoid undue failures. (Termination charges will be given separately) Note: Proportionate payment will be made if cable is of other length. 2/6/12/19/24/30 core signalling cable/4 or 6 Quad/PIJF/Any signalling/Telecom Cable (One no. unit = One cable of 10 m length) "

20.00 paint over one coat of primer on the following after scrapping and cleaning of the surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of site- in-charge. Epoxy will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer.(i)Apparatus Cases Full size. SOLAPUR DIVISION-S AND T/CENTRAL RLY

20.00 paint over one coat of primer on the following after scrapping and cleaning of the surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of site- in-charge. Epoxy will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer.(ii)Apparatus Cases Half size.

40.00 paint over one coat of primer on the following after scrapping and cleaning of the surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of site- in-charge. Epoxy will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer.(v)Track lead Junction Box. (Black enamel outside only)

20.00 paint over one coat of primer on the following after scrapping and cleaning of the surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of site- in-charge. Epoxy will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer.(vi)Point Machine with ground connections complete (Point Machine with Black enamel only outside and ground connections with Red Oxide)

20.00 paint over one coat of primer on the following after scrapping and cleaning of the surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of site- in-charge. Epoxy will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer.(vii)Axle counter devices. SOLAPUR DIVISION-S AND T/CENTRAL RLY

200.00 Machine, Track Lead junction Boxes, Block joints, Apparatus Cases etc.(each item to be taken as One Unit) This work will be carried out as per the standard practice being followed in Central Railway.

/ particulars, equipments names etc., legibly and neatly inside location boxes.(a)Full Case.

/ particulars, equipments names etc., legibly and neatly inside location boxes.(b)Half Case.

of material/equipments including loading and unloading in 10MT vehicle, anywhere to anywhere, and stacking at destination as per instructions of SSE in-charge as per inventory. For carrying heavy materials like cable drums, DG set, Electrical lifting barrier pedstal, IPS, Batteries, Point machine etc.Unit(Per Ton/Per KM=1 set) Total 1732507.00

Item Breakup - 03-NS SUPPLY AND EXECUTION

HDPE Pipe 110 mm Diameter,PE63, Class Metre PN6, with confirming to IS4984 with ISI marked (or) Latest.(Inspection By Consignee)

Casting of cement concrete to protect S&T cum equipments and laid cables above pipes, signal store etc by concrete mixture of cement , sand, stone in the ratio of 1:2:4 using 25 mm graded stone aggregate as per instruction of site in charge of railways. Concrete is to be casted with the help of suitable size of shuttering from as per site requirement. concrete is to be cured for sufficient time as per standard practice of railways (Inspection by Consignee)

Multipurpose Grease 3 or Grease MP-3 Kg (Bharat Petroleum) or Alvania -3 (Shell) or Melibus-2 (Indalco) or GP-5 (IOC) in original packing in 18 Kgs.(Inspection by Consignee)

Aluminium Paint Conforming to IS- Litre 2339,Make/Brand: Berger, Shalimar, Indigo only.(Inspection by Consignee)

Supply of 5 m Digital Measuring Tape 19 Numbers mm PROE519. (Inspection by Consignee)

PAINT READY MIXED RED OXIDE (ISC 446) Litre BRUSHING, FINISHING GLOSSY FOR GENERAL PURPOSE TO RDSO SPECN.M&C/PCN/122/2020 (REV.1), WITH RDSO AMENDMENT 1B OF SEPTEMBER 2020 PACKED IN NEW AND SOUND NON RETURNABLE M.S DRUMS TO SPECN.IS:2552/89 Gr.B2(Inspection by Consignee) SOLAPUR DIVISION-S AND T/CENTRAL RLY

Installation of earth electrode assembly by Numbers drilling 300mm vertical hole in rocky area as per Drg.No.RE/S&T/SIG/Tender/SK726/85 including earth wire connected through GI wire 8 SWG supported on M.S. flat of size 6mm x 40 mm toearth electrode as per drg. No.CR/S&T/SK-815 for sigg. Equipment such as lever frames, apparatus case, signals, relay racks,block insruments, and etc. as per RE manual. The earth value should be less than 10 Ohms including the lead wire. The value should be measured in presence of Rly. supervisor. It should be documented and painted on earth enclosure made of concrete.( only earth electrode will be supplied by Railway). All other material required for provision of earthing will be brought by the contractor.

Insulating Connections of 220mm stroke Point Machine in set One set consists of :- 1. Insulating Bush for Switch Extension Bracket to drg.no. S-23199 : 04 Nos. 2. Bush for Drive Rod Lug to Drg.No. RDSO S 3463 : 1 No. 3.Insulating Plate RH to Drg.No. S 3592 : 01 No 4. Insulating Plate LH to Drg.No. S-3593 : 01 No 5. Insulating Washer to drg.No. S-8640 : 04 Nos. 6. Drive Rod Insulation Washer to Drg.No. CWM 10323 : 2 Nos. 7. Insulating Plate for Locking Bar Assembly to Drg.No. S 3404 Alt-2 : 02 Nos. 8. Crank Bush to Drg.No. S 8912 Alt-2 : 6 Nos 9. Insulation Plate to Drg.No. CWM 09723 : 03 Nos 10. Insulating Plate for Gauge Tie Plate and Stretcher Bar to Drg.No. CWM 09623 :22 Nos. 11. SSD Insulation Plate to drg.No. CWM 10023 : 01 No. 12. Insulation Bush to Drg.No. CWM 09923 : 11 Nos. (Items from 1 to 12 to be supplied duly packed in polythene covers in sealed condition) (Inspection by Consignee)

L Bracket insulation made of Nylon 66 as Set per specification No:IRS.S 40/84. One set consisting of 1) Insulating plate Drg no S.8804=1nos, 2) Insulating Bush drg no S.8813=2nos, 3) Insulating washer drg no S.8640=04 nos.(Inspection by Consignee)

HIGH SPEED STEEL HIGH COBALT CONTANT Numbers DRILL BIT 14 MM. (Inspection by Consignee)

DRILL BIT WITH HOLE SAW CUTTER. HOLE Numbers SAW ARE MOUNT ON AN ARBOR SIZE 22 MM((7/8").USED FOR CUTTING CLEAN, CIRCULAR HOLES IN A VARIETY OF MATERIALS.(Inspection by Consignee)

HSS Parallel Shank Super Jobber Series Drill Numbers Bit of Size-7mm.Make: Miranda Tools or Bosch or JK OR TAPARIA OR STANLEY OR TATA AGRICO.(Inspection by Consignee) SOLAPUR DIVISION-S AND T/CENTRAL RLY

Arrangement of battery operated rail core Numbers drill along with additional 18 mm TCT railcore drill.Maximum core cutting capacity 36mm,rated speed 250/450ZRPM, Battery type Lion,Battery voltage 50V,Battery pack capacity 4AH,Number of battery supplied-2No. Charger-1No. Special design pressurised internal spindle cooling to give maximum life of core cutter by avoiding heating.3 sets of of 22,13,16,7.1 gauge drills adapters to be provided along with the machine.weight of machine with battery-18.5 Kg Make Eibenstok, Bosch, KPTL. (Inspection by Consignee)

Digital Current Clamp Meter to measure Numbers current leaks parasitic draws down to 1ma and electric loads from 1 ma to 100 Amp AC/DC and voltages from 0 to 600v AC/DC, small jaw size to measure current in signaling circuits, 4 digit display. Make Fluke/GTC/KOICO or superior with better specifications mentioned with all accessories like test lead, batteries, and carrying case, sample may got approved from consignee before supply. (Inspection by Consignee)

Battery operated High performance LED Numbers area with 3000 lumens output light weight & unbreakable as per specification attached (1) Product specification M18 HAL -+ M18 NRG 502B (2) Article No. 493345123 (3) Battery compatibility all Milwaukee M18 Batteries (4) Battery capacity (Ah) 5.0 (5) Battery type Li ion (6) No of Battery charger supplied 01 No. (7) Full Battey charging time 59 min (8) Maxlight output 3000/1500/650 (9) Max run time battery 2/4/9 hr. (10) No. of batteries supplied 2 Nos. (11) Voltage (AC) (V) 220- 240 (12) Voltage (DC) (V) 18 (13 Wight with battery pack (kg) 3 (14) One year onsite warranty, installation & training free of cost mak Eibenstock/Milwaukee or equivalent. (Inspection by Consignee)

Supply of Tx coil for CEL make SSDAC as Numbers per RDSO Specification No. RDSO/SPN/177/2012 with version 3 or latest. MAKE/BRAND:Central Electronics Limited (Inspection by RDSO)

Supply of Rx coil for CEL make SSDAC as Numbers per RDSO Specification No. RDSO/SPN/177/2012 with version 3 or latest.(Inspection by RDSO)

Execution of S & T work related to Job engineering /Signalling block of CTR/TTR/TSR or others, in one block, five unskilled manpower have to be provided during block for S&T connection removing & refixing as per Railway site engineer instruction.

AGROMEC Semi Electric Pallet Stacker. Numbers (Inspection by Consignee) (UNIT=Numbers=Pieces)

Supply of Hand Operated Track Drill Numbers Machine cycle gear type suitable for Drilling bond wire holes of size 9/32 inch in railway track. Make : Chandra ,KI or equivalent. (Inspection by Consignee) SOLAPUR DIVISION-S AND T/CENTRAL RLY

Micro Controller Logic card no3 ( MLB 1) of Numbers CEL make for SSDAC as per RDSO Spec.RDSO/SPN/177/2012 Ver 3 or latest. MAKE-CEL (Inspection by RDSO )

Relay Drive card for CEL Make Single Numbers Section Digital Axle Counter (SSDAC) system as per RDSO Specn . No.RDSO/SPN/177/2012 / Ver. 3 or latest of CEL make. (Inspection by RDSO )

Micro Controller Logic card no4 (MLB 2) of Numbers CEL make for SSDAC as per RDSO Spec.RDSO/SPN/177/2012 Ver 3 or latest of CEL make. (Inspection by RDSO )

Signal conditioner card no. 1 (SCC1) for Numbers SSDAC as per RDSO Spec no- RDSO/SPN/177/2012 VER.3 or latest of CEL make. (Inspection by RDSO )

SCC2 Card for CEL MAKE SSDAC SYSTEM Numbers AS PER RDSO SPECN.No RDSO/SPN/177/2012 Ver.3 Latest MAKE- CEL (Inspection by RDSO )

DC-DC CONVERTER CARD FOR CEL MAKE Numbers SSDAC as per RDSO Spec. no. RDSO/SPN /177/2012 Ver.3 or latest.Make -CEL MAKE- CEL (Inspection by RDSO )

MODEM CARD suitable for CEL MAKE Numbers SSDAC SYSTEM as per RDSO SPEC.NO RDSO/SPN/ 177/2012 Ver.3 or latest MAKE- CEL (Inspection by RDSO )

Maintenance Tool Kit for MSDAC ETU001 Set Eldyne make against the test certificate & guarantee certificate of OEM.Consisting of Items as listed below and as prescribed by OEM but not limited to:- 1. True RMS Digital Multimeter with probe set-01 no. 2. Extended wired socket to Interface with diagnostic plug- 01 no 3. Selector Switch on Panel Base- 01 no. 4. Adjustable Torque Wrench with 13 mm and 19 mm inserts-01 set 5. 19 mm Double ended spanner- 01 no. 6. Dummy Wheel-01 no. 7. Crimping Tool- 01no. Make/Brand - Eldyne Electro Systems Pvt Ltd, Kolkata. (Inspection by Consignee)

Signal Maintainer Tool kit as per Numbers specification attached. Each tool kit consist of 4 items that are follows:- 1. Digital Insulation and continuity tester. 2. Smart AC/DC leakage clamp meter. 3. Digital Earth tester. 4. True RMS Digital multimeter. Make/Brand- RISHABH or similar

Self Ballasted LED Lamps for General Numbers Lighting Services 9 Watt, 2 Star Brand: WIPRO or Similar (Inspection by Consignee)

Supply of Tool Bag of size, Length 17 Numbers Inch,Height 9 Inch and width 8 inch.Made of 410410 grade Taurpalin material of Wax coated, provided with 3 layer partitions. Stiched with heavy gauge ZIP Runners. Hand grip handles and shoulder grip Nylon belt.Suitable to accommodate Technician tools. Printed with Railway logo (INDIAN RAILWAYS,SOLAPUR DIVISION, S&T DEPARTMENT). Sample to be approved before bulk supply. Make: Branded/Local Made/PAHAL/UNNDUN/AJAY/DENEERS (Inspection by Consignee) SOLAPUR DIVISION-S AND T/CENTRAL RLY

Analog Card for SSDAC, Eldyne make part Numbers no 3CR310011ABAB Make: Eldyne Electro systems Pvt Limited. Accepted Make - ELDYNE ELECTRO SYSTEM PVT LTD. Make: Thales C/o Eldyne Electro System Pvt. Ltd. Make/Brand - Thales C/o Eldyne Electro System Pvt. Ltd. ( Warranty Period : Upto 30 months from the date of supply). (Inspection by RDSO )

Supply of Mother Board card for SSDAC Numbers Thales make Single Section Digital Axle Counter Spec:- RDSO/SPN/177/2012 (Ver.3), STR: SIQ 0001 Ver. 2.0. -Accepted firm offer Make/Brand: Thales/Eldyne ( Warranty Period : Upto 30 months from the date of supply) Make/Brand - Thales C/o Eldyne Electro System Pvt. Ltd.(Inspection By RDSO)

Digital Card for SSDAC, Eldyne make part Numbers no 3CR31010PFAA, Make: Eldyne Electro systems Pvt Limited. Make/Brand - Thales C/o Eldyne Electro System Pvt. Ltd. Inspection By RDSO

SK 30H Double Rail Contact( Tx coil )with 8 Numbers meter Integral cable[ part No- 5823111241 & 5823111242] Thales make suitable for Single section Digital Axle Counter System of Eldyne Make as per RDSO specification RDSO/SPN/177/2003 Version1.0 or latest.Make: Eldyne Electro Systems Pvt Limited.Accepted Make/Brand:- Eldyne Electro Systems Pvt Ltd. )(Inspection By RDSO)

SK30H Double Rail Contact with 8 mtrs. Rx Numbers coil (Rx-1 & Rx-2) for SSDAC, make - Eldyne as per RDSO Specification No. RDSO/SPN/177/2012(Ver.3) or latest. Accepted Make/Brand:- Eldyne Electro Systems Pvt Ltd. (Inspection By RDSO)

Supply of DC-DC Convertor Card Suitable Numbers for HASSDAC of GGTRONICS make as per RDSO Spec RDSO/SPN/177/2012(Ver.3) or latest. Accepted Make:GGT ( Warranty Period : Upto 30 months from the date of supply)(Inspection By RDSO)

Supply of RESET Card Suitable for Numbers HASSDAC of GGTRONICS make as per RDSO Spec RDSO/SPN/177/2012(Ver.3) or latest.. Accepted Make:GGT ( Warranty Period : Upto 30 months from the date of supply)(Inspection By RDSO)

Supply of Reset Box Suitable for HASSDAC Numbers of GGTRONICS make as per RDSO Spec RDSO/SPN/177/2012(Ver.3) or latest.. Accepted Make:GGT ( Warranty Period : Upto 30 months from the date of supply) (Inspection By RDSO)

G type fuse with holder of following ratings Set for siemens interlocking. Fuses are required in sets. Each set consists of one number of following ratings fuses: A) 0.63 Amp B) 2 Amp. Accepted offer for "RBCO" make or similar. (Inspection by Consignee) SOLAPUR DIVISION-S AND T/CENTRAL RLY

MUSHROOM HEAD PUSH BUTTON SWITCH Numbers WITH 1 NO + 1 NC OR 2 NO CONFIG. SUITABLE TO WORK WITH BLOCK PANEL UFSBI SYSTEM AS PER SPEC. NO. IRS:S- 105/2012 VER-0 OR LATEST (RED03 NOS), (YELLOW- 03 NOS), (GREEN-03 NOS), (BLACK -08 NOS). Accepted offer for "Siemens" make (Warranty Period : Upto 12 months from the date of delivery.) (Inspection by Consignee)

Sulphuric Acid Conforming to IS 266 - Numbers Chemically Pure (CP) 20KG Brand: Cynor or similar. (Inspection by Consignee) Total 12931207.85