REPAIR/REPLACEMENT OF ROOF, CEILING, FLOORING JOINERY, SANITARY FITTINGS WORKS AT OTM/ MD ACCN UNDER AGE B/R-III, GE RANCHI

Amount

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each, complete all as specefied and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) but exc 1.5 and n. Exc 4 Sqm each, complete all as specefied and directed.

Taking down shutters of any description n exc 1.00 Sqm each complete all as specefied and directed.

Taking down shutters of any description exc 1 and n . Exc 2 Sqm each, complete all as specefied and directed.

Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening, complete all as specefied and directed..

Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete all as specefied and directed.

M&L brick work with sub class 'B' brick straight or curved on plain exc 6m means radius build in cement mortar 1:6, complete all as specefied and directed.

All as per item No. 7 but except bricks.

Demoliton of cement concrete in ground floor paving n exc 15cm thickness ( below or above ground level ), complete all as specefied and directed..

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc, complete all as specefied and directed.

M&L Cement concrete 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc, complete all as specefied and directed.

M&L 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring finish even & smooth using extra cement, complete all as specefied and directed.

Supply only 38mm wide glass dividing strips, 3mm thick, complete all as specefied and directed.

M & L 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3, complete all as specefied and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame, complete all as specified and directed.

S & F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed.

S & F for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165

M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc, complete all as specefied and directed.

M &L 35 mm thick Plain framed, paneled shutter (three panel) with lock rail and panel of 12mm plywood commercial on both faces. The size of rail and style as per IS: 1003(Part - 1), complete as directed.

S & F 4 levers mild steel mortice lock vertical type size 100 mm in repairs etc complete all as spd and directed.

S&F Factory made, Plain framed, panelled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated of 35 mm thick shutters.

S & F 35mm thick 2nd class hardwood glazed and skeleton shutters of 8 panels, divided into squares with plain, chamfered or rounded, mitred & rebated sash bars and prepared to receive glass, gauze etc edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for doors, etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (a). Sample of shutter can be seen in GE's office.

S & F 35mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for windows, ventilators,etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (b).

S&F block boards 18/19mm thick gde 2 quality, interior grade, commercial type for cupboard shutter, shelf, etc, complete all as specified and directed

S&F in repair 12mm thick pre-laminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cupboard shutter, shelf, etc, complete all as specified and directed

S&F steel windows with side hung shutters including box type hinges with one No MS handle per leaf made of FI 25 x 3 mm made to shape Appx 200 mm in length and two Nos 150mm long MS tower bolt welded to each shutter including 150 mm long peg stay, complete with glazing bars, dovetailed or welded, complete all as specefied and directed.

All as per item No 27 above, but without glazing bars, complete all as specefied and directed.

S&F steel window, ventilators, fixed type, with glazing bars, complete all as specefied and directed.

S&F framed work as in doors or gates of angle or other section with guset plates complete doors etc to be prepared to hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing, complete all as specified and directed

S&F 0.60mm thick Mild steel, plain, black sheet in covering to door shutters; covering to door chowkats (frames) cut to size edges beaded if directed, holes punched;incl round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as reqd, complete all as specified and directed

S&F framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed, baluster walk ways, railings, framework of water tanks & similar wk conforming to Fe410-0 or Fe310-0 .

S&F Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc, complete all as specified and directed

S&F in repair Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc, complete all as specified and directed.

Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads, complete all as specefied and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane, complete all as specefied and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long, complete all as specefied and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 100 mm long, complete all as specefied and directed.

S&F Aluminium anodised handles of extruded section and fixed 150 mm long, complete all as specefied and directed.

S&F Aluminium anodised handles of extruded section and fixed 100 mm long, complete all as specefied and directed.

S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed, complete all as specefied and directed.

S&F 75 mm size Butt hinges medium weight cold rolled stainless steel and fixed, complete all as specefied and directed.

S&F 100mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw, complete all as specefied and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specefied and directed.

MS ordinary rat tail rod pattern springs 200mm, including roller and roller plate, complete all as specified and directed.

M&L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer, complete all as specified and directed

M&L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer, complete all as specefied and directed.

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water, complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and fair without using extra cement, complete all as specefied and directed.

M&L Rendering 10mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and fair without using extra cement, complete all as specefied and directed.

M & L 5 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished even & smooth without using extra cement, complete all as specified and directed.

Preparation of new plastered surfaces of walls using sand paper and applying two coats of cement base paint over a coat of cement base primer, complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling surfaces, complete all as specified and directed

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on wall surfaces, complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash, complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of wall and applying one coat of white wash, complete all as specified and directed

Preparation of old plastered surfaces of wall and applying two coat of cement base paint incl removal of existing treatment.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and directed

M&L Machine pressed precast concrete interlocking paver block 60mm thick with grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 grade, complete all as specified and directed

M&L antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors, complete all as specified and directed

M&L coloured ceramic glazed tiles 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement, complete all as specified and directed

M&L 9-10mm thick Light coloured vitrified ceramic tiles of size in floors, not exceeding 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over & including 20mm thick screed bed in CM 1:4, complete all as specified & directed.

All as per Item No 62 but as in Skirting with 10mm thick rendering in CM 1:3, complete all as specified and directed.

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete

All as per Item No 64 but as in Skirting with 10mm thick rendering in CM 1:3

M&L 16 to 18 mm thick granite (of any type), as in cooking plateform etc set in CM 1:4 and grinding and polishing and rounding / moulding the edges, complete all as specified and directed.

M & L 20-25 mm thick machine cut Kota Stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding,rubbing,rounding to exposed edges and polishing in granite finish, complete all as specified and directed.

M & L for 20-25 mm thick machine cut Kota Stone slab as in risers of steps, skirting, dado and pillar over cement screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding,rubbing,rounding to exposed edges and polishing in granite finish, complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed

Demolition of cement concrete reinforced as in chullah hoods, chajjas, parapet, shelves and plate form etc, complete all as specified and directed

M&L RCC as in kitchen platform, shelves etc type BO 1:2:4 (12.5 mm graded aggregate) including necessary form work, complete all as specified and directed

S&F mild steel deformed bars 8 to 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc, complete all as specified and directed.

S&F in repair 500 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I

S&F in repair 1000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I

Dismantalling of existing water tanks and removinging to store and S&F 3000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed.

Dismantalling of existing water tanks and removinging to store and S&F 2000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed.

S&F PVC ball valve 20mm dia with epoxy coateed aluminium rod and high density ball (minium weight 210 gms), complete all as specified and directed

Taking up or steel tubing & connections including cleaning for refixing bore of pipe 15mm etc, complete all as specified and directed.

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 15mm bore etc, complete all as specified and directed

Refixing old galvanised steel tubes & connections on wall 15 mm bore, complete all as specified and directed .

Taking up or steel tubing & connections including cleaning for refixing bore of pipe 20mm etc, complete all as specified and directed

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 20mm bore etc, complete all as specified and directed.

Refixing old galvanised steel tubes & connections on wall 20 mm bore, complete all as specified and directed .

S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc, comlete all as specified and directed .

S&F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc, comlete all as specified and directed .

S&F in repair bib tap 15mm fancy type of PTMT any colour high pressure screwed for iron pipe and fixed, complete all as specified and directed .

S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc, complete all as specified and directed .

S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed fboth ends for or iron pipe or for unions and fixed, complete all as specified and directed

All as per above Item No 88 but two way angle cock

S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling, complete all as specified and directed.

S&F in repairs15mm dia pillar tap cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc, complete all as specified and directed.

S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc, complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc, complete all as specified and directed.

S&F in repair MS conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as a spproved with bracket and fixed to wall, complete all as specified and directed

S&F fancy type sofia brakcet for the curtain rod (suitable for 20mm dia curtain rod) of any approved colour and design complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor, complete all as specified and directed

S&F in repair PVC connection 450mm long with two PTMT nuts (Prayag), complete all as specified and directed.

S&F CP towel rail, 20mm dia, D type,60cm long, complete all as specified and directed.

Fixed in repair only PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete of make-Parryware-slimline-Prayag/ Commander-water bird

S&F in repair 32mm bore waste coupling of PTMT (half or full threaded) (Min wt 45 gms), complete all as specified and directed.

S&F in repair 40mm bore waste coupling of PTMT (half or full threaded) (Min wt 45 gms), complete all as specified and directed.

S&F in repair 32mm bore low density polyethylene (LDPE) waste pipes of pressure rating 6kgf/sqcm, complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

M&L providing cement concrete type B1, 1:2:4 (20mm graded aggregate) as in roof kerbs or mud stop, benching rounded or chamfered on edges, chajjas and the like, complete all as specified and directed.

M & L welding in repairs to metal n exc 6 mm thick and length exc 2.5 cm and n exc 5 cm, complete all as specified and directed

S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc complete, size of frame 105mmx60mm, complete all as specified and directed

All as per item No 107 above but size of frame 125mmx60mm, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

S & F PVC cabinet mirror box type in repairs, complete all as specified and directed. Make – PRAYAG.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 110mm dia, complete all as specified and directed

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 75 mm dia, complete all as specified and directed

S&F PVC (SWR) bends/shoes any radius of 110mm dia, complete all as specified and directed.

S&F PVC (SWR) bends any radius provided with access door of 110mm dia, complete all as specified and directed.

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia, complete all as specified and directed.

M&L providing water proofing treatment to sunken slabs of toilets with standard water proofing polymeric membrane of 3 mm thick and weight not less than 3 Kg /SM with 90 micron molecular high density polythene film, sand witched between two layers of polymeric membrane laminated on both sides with 20 micron HM HDPE film over a coat of hot blown bitumen of grade 85/25 applied at the rate of 1.20 Kg/SM after priming the surface with bitumenous primer conforming to IS 784 ( @ 0.30 lts/SM) ,over lapping of membrane shall be fixed uniformly by LPG torch flames all as specified and directed as on roof surfaces, complete all as specified and directed

M&L PCC 1:5 :10, type E-2 ,using 40 mm aggregates as in sunken slab filling, complete all as specified and directed.

Demolition of reinforced cement concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas, over head tank and similar suspended work and removing debris outside MD land, complete all as specified and directed.

M & L repairing broken edges of chajja's, roof projection, Fascias etc . In small widths/depths ( exposed area exc 0.05 sqm but n exc 0.10 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates , over GI wire mesh, giving a coat of anti corrosive paint to exposed Reinforcement and using coat of anti corrosive paint to exposed Reinforcement and using chemical for bonding old and new concrete/plaster and finishing with CM 1:3 plastering, incl 2 coats of white wash to match the exisitng surfaces incl removing debris , necessary scaffolding , etc, complete all as specified and directed. (Note : Reinforcement if any provided shall be measured and paid separately)

M & L preparing old plastered surfaces of wall by scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and and applying one coat of acrylic distemper, white or tinted, complete all as specified and directed.

ISHAAN ENGINEERING