Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.5 LAccepted-AOC 601 6TH FLOOR MANGOOR VALLEY NEAR GURUDWARA MANGOOR HILLL VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹10.4 L+₹40,620 (4.07%)Rejected-AOC T 3 HILL CREST APARTMENT BEHIND AMBABAI TEMPLE VASCO DA GAMA GOA 403 802 | VASCO DA GAMA | SOUTH GOA | GOA | 403802 | L2 | Rejected-AOC Not Being L1 | |
| 3 | L3₹11.3 L+₹1.4 L (13.6%)Rejected-AOC 2 MANORATH MAIMOLEM VASCO DA GAMA GOA 403802 | VASCO DA GAMA | SOUTH GOA | GOA | 403802 | L3 | Rejected-AOC Not Being L1 |
| Sl No | Description | Qty | Unit | Heat Control L3 | U k Enterprises L2 | SHIVANI ENTERPRISES L1 |
|---|---|---|---|---|---|---|
| 1.00 | Taking down storage type water heater (Geyser) of 25 litre capacity after disconnecting inlet/outlet/vent pipes, electric/earth connections, stop cocks, non-return valves etc, arresting leakage of inner copper/steel tank by welding/ brazing etc, reassembling the geyser by replacing gaskets, wornout nuts, washers etc, including refixing the geyser in position, tightening/ replacing the nuts, bolts, washer, connector etc reconnecting all inlet/ outlet/ vent pipes, electric/ earth connections and carrying out testing for proper functioning complete all as specified and directed.
Notes:
1. Quoted rate shall be deemed to be inclusive of cost of minor spares, wires nuts, bolts, washer etc required at site at site.
2. Non-return valve, stop cock, PVC/ copper connections, cable, thermostat etc shall be measured and paid separately. | 75 | Each | 700 ₹52,500 | 450 ₹33,750 | 150 ₹11,250 Lowest |
| 2.00 | Supply and Fix in repairs heating element of 1.5/2.0 kilo Watt capacity, any type, any make, as per sample, suitable for storage type water heater of existing installed make, including making all connections by replacing inter connecting copper conductor cables and any unserviceable heating elements and testing complete all as specified and directed. | 75 | Each | 800 ₹60,000 | 500 ₹37,500 Lowest | 1,200 ₹90,000 |
| 3.00 | Supply and Fix in repairs thermostat suitable for geyser of 25/50 ltr capacity, any type, any make, as per sample, suitable for storage type water heater of existing installed make, including testing complete all as specified and directed. | 75 | Each | 260 ₹19,500 Lowest | 300 ₹22,500 | 400 ₹30,000 |
| 4.00 | Supply and Fix in repairs non-return valve (gun metal) of 15/20 mm dia bore complete all as specified and directed. | 30 | Each | 290 ₹8,700 | 400 ₹12,000 | 260 ₹7,800 Lowest |
| 5.00 | Supply and Fix in repairs capillary thermal cutout for geyser as per sample complete all as specified and directed. | 30 | Each | 120 ₹3,600 Lowest | 400 ₹12,000 | 400 ₹12,000 |
| 6.00 | Supply and Fix in repairs SS wiremesh braided 25/50 geyser connection pipe of length min 2 feet suitable for 25/50 litre capacity storage type water heater including necessary GI nipple fittings complete all as specified and directed. | 50 | Set of 2 | 350 ₹17,500 | 441 ₹22,050 | 240 ₹12,000 Lowest |
| 7.00 | Supply and Fix in repairs geyser water storage tank of 25 liter capacity, made of Stainless Steel complete with all accessories including replacement at site by changing thermostat, on cutout, indication lamps, restructuring damaged body and painting etc as directed by engineer in charge complete all as specified and directed. | 25 | Each Job | 1,800 ₹45,000 Lowest | 3,500 ₹87,500 | 2,500 ₹62,500 |
| 8.00 | Supply and Fix in repairs stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm dia bore complete all as specified and directed. | 25 | Each | 320 ₹8,000 Lowest | 360 ₹9,000 | 350 ₹8,750 |
| 9.00 | Supply and Fix in repairs 16A 3 pin top plug complete all as specified and directed | 30 | Each | 110 ₹3,300 | 75 ₹2,250 Lowest | 200 ₹6,000 |
| 10.00 | Taking down ceiling fans/ exhaust fans of any make or sweep, at site by removing electrical connections, cleaning, greasing of bearings, replacing worn out parts like nuts, bolts, rubber seal, bush, bearing, split pins; re-assembling the fan, testing and refixing in the original location complete all as specified and directed. Note:-
(i) Spares shall be measured and paid separately under relevant items
of this Schedule.
(ii) Labour for replacement of spares shall be deemed to be included
under this item. | 150 | Each | 150 ₹22,500 | 140 ₹21,000 | 100 ₹15,000 Lowest |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
19 Dec 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) CG GOA
Military Engineer Service, GE(I) CG Goa, HQ CG DHQ-11, Chicolna, PO Bogmalo, Goa-403 806
REPAIR MAINTENANCE OF CEILING, EXHAUST, WALL MOUNTED FANS, GEYSERS AND CONNECTED WORKS AT DHQ-11 AREA UNDER GE (I) CG GOA
2025_MES_741899_1
8626/GOA/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
SOUTH GOA
As per tender documents
8 documents required · 8 mandatory
₹500
GE (I) CG GOA
₹24,000
Yes
19 Jan 2026
28 Nov 2025
26 Dec 2025
28 Nov 2025
19 Dec 2025
12 Dec 2025
29 Nov 2025 - 10 Dec 2025
Amount
Taking down storage type water heater (Geyser) of 25 litre capacity after disconnecting inlet/outlet/vent pipes, electric/earth connections, stop cocks, non-return valves etc, arresting leakage of inner copper/steel tank by welding/ brazing etc, reassembling the geyser by replacing gaskets, wornout nuts, washers etc, including refixing the geyser in position, tightening/ replacing the nuts, bolts, washer, connector etc reconnecting all inlet/ outlet/ vent pipes, electric/ earth connections and carrying out testing for proper functioning complete all as specified and directed. Notes: 1. Quoted rate shall be deemed to be inclusive of cost of minor spares, wires nuts, bolts, washer etc required at site at site. 2. Non-return valve, stop cock, PVC/ copper connections, cable, thermostat etc shall be measured and paid separately.
Supply and Fix in repairs heating element of 1.5/2.0 kilo Watt capacity, any type, any make, as per sample, suitable for storage type water heater of existing installed make, including making all connections by replacing inter connecting copper conductor cables and any unserviceable heating elements and testing complete all as specified and directed.
Supply and Fix in repairs thermostat suitable for geyser of 25/50 ltr capacity, any type, any make, as per sample, suitable for storage type water heater of existing installed make, including testing complete all as specified and directed.
Supply and Fix in repairs non-return valve (gun metal) of 15/20 mm dia bore complete all as specified and directed.
Supply and Fix in repairs capillary thermal cutout for geyser as per sample complete all as specified and directed.
Supply and Fix in repairs SS wiremesh braided 25/50 geyser connection pipe of length min 2 feet suitable for 25/50 litre capacity storage type water heater including necessary GI nipple fittings complete all as specified and directed.
Supply and Fix in repairs geyser water storage tank of 25 liter capacity, made of Stainless Steel complete with all accessories including replacement at site by changing thermostat, on cutout, indication lamps, restructuring damaged body and painting etc as directed by engineer in charge complete all as specified and directed.
Supply and Fix in repairs stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm dia bore complete all as specified and directed.
Supply and Fix in repairs 16A 3 pin top plug complete all as specified and directed
Taking down ceiling fans/ exhaust fans of any make or sweep, at site by removing electrical connections, cleaning, greasing of bearings, replacing worn out parts like nuts, bolts, rubber seal, bush, bearing, split pins; re-assembling the fan, testing and refixing in the original location complete all as specified and directed. Note:- (i) Spares shall be measured and paid separately under relevant items of this Schedule. (ii) Labour for replacement of spares shall be deemed to be included under this item.
Supply and Fix in repairs rubber bush for hanging ceiling fan complete all as specified and directed.
Supply and Fix in repairs MS nuts and bolts with split pin, suitable for ceiling fan, as per sample, complete all as specified and directed.
Supply and Fix in repairs ball bearing suitable for ceiling fan/ exhaust fan/ air circulator/ pedestal fan, any type, any make, as per sample complete all as specified and directed.
Supply and Fix in repairs shackle with split pin, as per sample complete all as specified and directed.
Supply and Fix in repairs fan blade for ceiling fan of 1200 mm sweep, any make colour as per existing complete all as specified and directed.
Supply and Fix in repairs fan canopy for ceiling fan of 1200 mm sweep, any make colour as per existing complete all as specified and directed.
Material and Labour for opening body cover of ceiling fan/ exhaust fan/ wall mounted fan of following type, any make, cutting existing worn out winding without damaging the stator, removing coil insulation and fixing new insulation of polyster paper, winding stator with super enameled copper wire of suitable gauge with correct number of turns of auxillary and main winding, varnishing, baking, soldering new lead of copper wire, testing complete all as specified and directed.
1200 mm sweep ceiling fan.
Upto 300 mm sweep exhaust fan.
Upto 250 mm sweep exhaust fan.
Upto 150 mm sweep exhaust fan.
Upto 450 mm sweep exhaust fan.
Wall mounted fan of any size upto 450 mm.
Supply and Fix in repairs 2 core wire of size 23/0.0076 for ceiling fan complete all as specified and directed.
Supply and Fix in repairs 3 core 2.5 sqmm multistranded copper wire complete all as specified and directed.
Material and Labour for preparation of removing old paint by paint removers and cleaning the surfaces of ceiling fan with scrapers or emery paper and painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc., marking MES number on body of the fan, including taking down & refixing it.complete all as specified and directed.
Material and Labour for preparation of old painted surfaces of exhaust fan and spray painting one coat of synthetic enamel paint, marking MES number on body of the fan, including taking down, refixing, connecting and testing with complete all as specified and directed.
Supply and Fix in repairs capacitor, upto 1.5 mfd, for Exhaust fan complete all as specified and directed.
Supply and Fix in repairs capacitor, upto 2.5 mfd, for ceiling fan/ wall Mounted fan complete all as specified and directed.
Supply and Fix in repairs capacitor, of capacity over 4.00 mfd, for fan complete all as specified and directed.
Supply and Fix in repairs MS clamps for hanging fans including locking screw. blade screw, nut bolts and washers complete all as specified and directed.
Supply and Fix in repairs down rod for hanging ceiling fan of 1200mm sweep, 1.5 m long using 15 mm dia MS tubing, including cutting and threading complete all as specified and directed.
Supply and Fix in repairs down rod for hanging ceiling fan of 1200mm/1400mm sweep, 30 to 45 cm long using 15 mm dia MS tubing, including cuttingand threading complete all as specified and directed.
Supply and Fix in repairs Ceiling fan motor suitble for 1200 mm sweep fan upto 35 watt, as per sample on site, including testing and assembling complete all as specified and directed.
Supply and Fix in repairs BLDC fan controller card suitable for 1200 mm sweep fan upto 35 watt, as per sample on site, including testing and assembling complete all as specified and directed.
Supply and Fix in repairs bearing suitable for BLDC fan, of any make, as per sample, including testing complete all as specified and directed.
Supply and Fix in repairs replacement electric water heater, storage type, steel body with stainless steel inner tank and heating element upto 2 KW, 25 litre capacity, BEE 5 star rating including all accessories such as safety valve, thermostat, NRV, connection piece etc including depositing old unserviceable geyser in MES store yard complete all as specified and directed.
Supply and Fix in repairs replacement exhaust fan, mild steel body, 450 mm sweep, including all connections, clamps, louvers, accessories and fixing on wall with nuts bolts washers etc, repairing/adjusting hole on wall for fixing exhaust fan and PCC work etc and taking down and depositing old exhaust fan in MES store yard complete all as specified and directed.
Supply and Fix in repairs replacement exhaust fan, mild steel body, 300 mm sweep, including all connections, clamps, louvers, accessories and fixing on wall with nuts bolts washers etc, repairing adjusting hole on wall for fixing exhaust fan and PCC work etc & taking down and depositing old exhaust fan in MES store yard complete all as specified and directed.
Supply and Fix in repairs replacement exhaust fan made of sturdy Engineering , PVC body, 300 mm sweep, 03 blade including all connections, clamps, louvers, accessories and fixing on wall with nuts bolts washers etc and taking down and depositing on exhaust fan in MES store yard complete all as specified and directed.
Supply and Fix in repairs replacement exhaust fan made of sturdy Engineering , PVC body, 250 mm sweep, 03 blade including all connections, clamps, louvers, accessories and fixing on wall with nuts bolts washers etc and taking down and depositing on exhaust fan in MES store yard complete all as specified and directed.
Supply and Fix in repairs replacement exhaust fan made of sturdy Engineering , PVC body, 150 mm sweep, 03 blade including all connections, clamps, louvers, accessories and fixing on wall with nuts bolts washers etc and taking down and depositing on exhaust fan in MES store yard complete all as specified and directed.
Supply and Fix in repairs replacement ceiling fans, 230V, 1200mm sweep along with neccessory accessories like downrod, blades, fixing rubber clamps, cups etc with squirrel cage induction motor and depositing old unserviceable ceiling fan in MES storeyard complete all as specified and directed.
U k Enterprises (BID ID -3508802)
Heat Control (BID ID -3499697)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.53 MB
Completetenderdocus.pdf
Tender Documents • 1.62 MB
BOQ_830764.xls
BOQ • 10.84 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .