Estimate for construction of New Toilet on 2nd Floor Division office building at Canal Colony Rewari

Amount

Dismantling of Brick work (HSR item no.8.5(b)

Scraping of cement plaster (HSR item no.8.32( c)

Dismantling of cement concrete 1:2:4 plain (HSR item no.8.6(d)

P/L four courses of water proofing treatment consisting of first and third course of blown type bitumen grade 85/25 applied hot at 1.6 kg per sqm for each course and 2nd course of fibre glass R.P.tissue and fourth and final course of stone grit 6 mm and down size or pea size grit spred at 0.006 cum per sqm including preparation of surface (HSR item no.13.62)

1st class Brick work laid in cement sand mortar 1:5 in first story upto 4 metres above plinth level (HSR item no 11.8 +11.41)

P/L in position machine batched abd machine mixed design mix M-20 grade cement concrete for reinforcement cement concrete work . (HSR item no 10.65)

Steel reinforcement TMT bars FE-EQR/FE-500D grade (HSR item no 18.22)

Tile terracing consisting of tiles 22.86cm x 11.43cm x 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and another layer of mud plaster for laying of tiles etc. (HSR item no 13.13).

Cement concrete 1:2:4 gola 10cm x10 cm quadrant along junction of roof with parapat wall finished smooth (HSR item no 13.64).

15 mm thick cement plaster 1:4 on rough side of single or half brick wall (HSR item no 15.10).

6 mm thick cement plaster 1:3 with floating coat of neat cement 1.5 mm thick and one coat of white washing on bearing of R.C.C slab and beam (HSR item no 15.83).

Cement ponting 1:3 deep varity on brick and tile work (HSR item no 15.61).

10 mm thick cement plaster 1:4 HSR item no 15.52)

P/F fan hookds 80.cm long of required shape and size (HSR item no 18.38(a))

P/F PVC rain water pipe 6 kg pressure of ISI mark in cement mortar during massonry work (HSR item no 13.89(a)).

P/F PVC bend ISI mark (HSR item no 13.90(a)).

Top khurra (HSR item no 13.50)).

Bottom khurra (HSR item no 13.57)).

Base course of floor consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling (HSR item no 14.1).

P/F ceramic Tiles 600 X 600 mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement course mortar (HSR item no 14.89).

P/F 1st quality ceramic glazes wall tiles confirming IS 15622 of approved make in all colours shades etc . 300x450 mm (HSR item no 14.92(b)

Pressed steel sheet frames consisting of 2mm steel sheet door and window frame size 114X50mm with 35 mm wide (HSR item no 18.34(b)

Factory manufactured solid flash doors with block board core as per I.S. No. 1659-1969 bonded with water proof type etc. (HSR item no 17.93 a(iii))

Wire gauge kail wood door and window shutters without springes hosed in window in chowkets including chocks iron hinges screws etc (HSR item no 17.26(a)

S/F glass panes with moulding of commercial hard wood etc. (HSR item no 17.36(d)

P/F HDPE water storage tank of sintex, Diplast 700 Ltr, O.K, Supreme, make with covers approved by Engineer in- charge etc. (HSR item no 30.119)

P/F in position best indian make European type WC etc. (HSRitem no 30.6(i)

P/F in position best indian make WC (to the approval of the Engineer -in-charge) . (HSR item no 30.2(b)(i)). +HSR item no 30.12(i)

P/f cistern plastic make

P/f Waste pipe

P/f Connection pipe

P/f CPVC pipe

CPVC Tee ( (NS item)

CPVC Elbow ( (NS item)

CPVC Brass Reducer ( (NS item)

CPVC Socket ( (NS item)

P/f in position best indian make beavelled edge 5.5 mm thick mirror mounted on asbestos sheet etc. ( HSR item No.30.71(a)(i)

P/f in position C.P brass bib cock of best quality Bib cock Long Body ( HSR item No.30.75(a)

Bib cock ( HSR item No.30.75(c))

P/f in position C.P brass stop cock of best quality 15 mm stop cock ( HSR item No.30.76(i)

P/f in position best indian make (ordinary) lavatory suits ( HSR item No.30.41 white(vii)

Ball valve (NS item)

P/f in position best indian makea range of three urinals in viteous chinaware with two nos. 5 lit. capacity CI automatic flushing system with flush pipe etc. ( HSR item No.30.27(i) white

Labour for pipe fitting @ L.S.

Constructing brick masonry inspection chamber sizes as given below uoto 0.60 metre average depth in cement moetar 1:5 lime concrete with 40% lime mortar 2:3 in foundation cement concrete plaster 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1mm thik neat cement etc (HSR oitem no 29.84(a))

Electricals fittings Fan point ( HSR item no 31.36(i)(b)

Light point ( HSR item no 31.36(ii)(b)

Twin control light point with 2 way ,5 amp. Single pole switch 31.36(iii)(b)

3 pin 5amp plug point including earthing 31.36(vii)(b)

3 pin 15amp plug point with 4sqmm PVC insulated copper conductor cable including earthing 31.36(viii)(b)

Distempering with washable oil bound distemper two coats over old distempered work (HSR item no 16.60).

Providing two coats of exterior acrylic emulsiom paint (HSR item no 16.79(b)).

Applying pink primer or aluminium priming coat on wood work including prep. Of surface knotting and stopping (HSR item no 16.3)

Painting two coats excluding priming coat with ready mixed paint for new wood work (HSR item no 16.4)

Devinder Kumar Contractor