BARC/CED/ET/51/2021-2022 Dated 13.01.2022

Amount

Dismantling doors, windows and clear storey Openings (Steel / wood) shutter including chowkhats, architraves, hold fasts etc. complete and stacking within a 100 m lead as directed by Engineer-in-charge. Of Area 3.00 Sq.M and Below

Removing the damaged PVC Flooring carefully including removing the resins sticking on the floor, cleaning the floor carefully stacking the serviceable materials at places shown and disposing the unserviceable materials within 50 m lead at places shown complete as directed by the Engineer-in-charge.

Providing and Fixing Homogeneous 2.00 mm thick UV resistant PVC tile in flooring wooden veeneer finish (Approved quality and shade) and skirting in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer like Dunlop-S-758, Fevicol SR 998 , PolygripSP or equivalent including, levelling small undulations with plasterof paris if required , rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-Charge in approved colour and shade

Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete. 'Note: Measurements for payments will be based on finished area of shutter size

Extra for providing and fixing flush doors with decorative veneering in one side and commercial plywood finish in other side. 'Note: Measurements for payments will be based on finished area of shutter size.

Extra over flush door shutters making rebate for double leaf shutters of all sizes, thickness and finishes complete as per the drawings

Providing II Class teak wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge Note : Timber to be got approved by the Engineer-in-charge before manufacturing.

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush door including fixing 4 mm clear glass with necessary teak wood beadings complete all as per specifications and as per drawings.

Providing and fixing 25 mm thick Colour PVC Integral Sheet door shutters flush door of approved colour, approved quality make of M/s. Jain Irrigation System Ltd. or product meeting technical parameters, design, colour and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges, Fixing of Stoppers, tower bolts, baby latch, aldrop, handles etc.wherever required with S.S. screws. etc ( Stopper, Tower bolt, Baby latch, Aldrop, Handels etc Shall be supplied by department) etc. complete as per specifications and as directed by Engineer-in-charge.

Providing and applying French spirit polishing for wooden sufaces with two coats on new works including a coat of wood filler to form a uniform neat finish as directed by the Engineer -in-charge and / or as per the specifications complete as directed by the Engineer-in-charge.

Supplying 6 mm thick commercial plywood of approved make conforming to IS of size (8' x 4') in Mod Lab, CED store, including transportation, loading, unloading, stacking etc. complete as per specifications and as directed by the Engineer-in-charge.

Supplying 12 mm thick commercial plywood of approved make conforming to IS of size (8' x 4') in Mod Lab, CED store, including transportation, loading, unloading, stacking etc. complete as per specifications and as directed by the Engineer-in-charge.

Supplying 18 mm thick commercial plywood of approved make conforming to IS of size (8' x 4') in Mod Lab, CED store, stacking complete as per specifications and as directed by the Engineer-in-charge.

Supplying 3 mm thick Teak veneer of approved make of size (8' x 4') in Mod Lab, CED store, stacking complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing single point lock cum handle for aluminium openable windows / top hung shutters of M/s GEETAVIN make or or product meeting technical parameters etc. complete all as per specifications and as directed by the Engineer-in-charge.

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) (Minimum anodizing thickness of 15 micron)

Extra over above item for providing Colour Anodizing / Dyed anodizing Aluminium Sections of approved colour

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With clear Float glass panes of 5.00 mm thickness

With clear Float glass panes of 6.00 mm thickness

With Frosted glass panes of 6.00 mm thickness

Provoding and fixing 12mm thick calcium silicate board of approved quality in panelling fixed aluminium partition frames with C.P brass/stainless screws etc. Filling the joints with approved putty to get a seamless joints complete as per Architectural drawing and direction of Enginee-in-Charge.

Providing and fixing double action hydraulic floor spring of approved quality (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate

Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved quality make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge.

Providing and fixing mirror of superior glass of "Modi Guard" or product meeting technical parameters and of required shape and size with 4 mm thick e-board backing fixed to walls with concealed Brass C.P Mirror screws and concealed washers etc. complete all as per specifications and as directed by the Engineer-in-Charge

Providing and fixing Minimum 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Telephone Black colour for kitchen platforms, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels.

Providing and constructing brick work in cement mortar 1:6 (Using crushed sand) using Standard bricks of approved quality / class, in super structure above plinth up to Floor-II level in all shapes and sizes including curing, raking out joints complete as per specifications and as directed by the Engineer-in-charge.

Providing and constructing Half brick masonry using bricks of approved quality/ class, in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105X75mm size) at every 900 mm height including formwork curing etc. complete as per specifications and as directed by the Engineer-in-charge but excluding reinforcement up to 20 m height. (Note : Reinforcement will be paid under relevent item)

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. using TMT bars of specified grades all dia TMT bars to be supplied by the contractor coforming to IS 1786. All test reports to be provided with the supply of the materials.

Providing, fixing, fabricating stainless steel mesh of required opening size for window using 304 grade Stainless Steel of 14 guage and opening of size 12 mmx 12mm including welding, fixing at site etc. complete as directed by the Engineer-in-charge. 'Note : Only S. S. mesh will be measured on square metre basis any supporting member require for fixing will be paid under relevant item.

Providing 15 mm thick plastering using Ready mix internal plastering compound of approved quality for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge.

Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved quality to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Supply of manpower for carrying out various carpentry maintenance works with necessary tools such as chiesel ,hammer ,wood planner,screw driver,wood saw,tape etc to attend wooden and aluminium carpentry maintenance work and also seasonable departmental work ,alloted by the Engineer -in -charge on daily basis. Note :- Carpentary tool kit shall be arranged by contractor at his own cost. 'Deployment: The contractor shall deploy carpentar for each job for 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. Measurement will be per job basis.

Skilled Manpower for Carpentry Work

Unskilled Manpower for Carpentry Work

Supplying the following material confirming to IS specifications, approved quality in Mod Lab, CED store, including transportation, loading, unloading, stacking etc. complete as per specifications and as directed by Engineer-in-charge.

D Type aluminium handle 175mm X 125mm X 12mm

Stainless steel Towerbolt 150mm X 12mm (SS304)

Aluminium Baby latch 75mm X 12mm

Aluminium die cast body tubular type universal door closer

Stainless steel Hinges 125mm X 65mm X 2.8mm (SS304)

Godrej Mortise lock Universal (6 Levers)

6mm thick Fibre cement board

4 lever Mortce Lock for aluminium partition (Dead Lock)

6mm thick clear solid U.V. resistant Polycorbonate sheet

Godrej Universal Furniture lock (2333)

Fevicol pack of 1 kg each

Stainlesss screw Size 38x8 Box (Packet of 100 nos of Screws)

Wood Screw Size 50x8 Box (Packet of 100 nos of Screws)

Wood Screw Size 35x8 Box (Packet of 100 nos of Screws)

Providing and fixing Heavy Duty Stainless steel of (M/s. 'GEETAVIN' make - SS304 Grade) or product meeting technical parameters adjustable friction windows stays of approved quality with necessary stainless steel screws to the side hung windows as per specifications and as directed by the Engineer-in-charge. Size 22" x 22" x 2.50 mm As per cat No. FH001 of GEETAVIN make or product meeting technical parameters,

Providing and fixing decorative high pressure 1.0 mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed by the Engineer-in-charge.

Making LOUVERED OPENING of size (600mm to 760mm in width and height about 450mm) in door shutters including providing & fixing teak wood lipping, beading, aluminium louvers with necessary screws, nails, adhesive etc. comp;ete and as directed by Engineer-in-charge. Note : Aluminium louvers will be paid under relevent item of this schedule.

Removing carefully the existing damaged Aluminium frame/shutter with full size glass panel from its existing location without damaging any glass, aluminium members, lock,floor spring etc. Resizing the same for smooth operation to make floor touch free including cutting the full size glass panel in two parts as directed, strengthning the aluminium shutter by providing & fixing 10mm dia. M.S. Rod at both ends of the shutter, reshaping & refixing of existing board panel/glass sheet as required, re-erecting and repositioning the frame/shutter at the same place , re-fixing all fitting such as pull/push handle,hydraulic door closer, floor springs, hinges,locking arragements,tower bolt,replacing the existing damaged rubber gasket lining, aluminium cleats,clips with new ones etc. complete as required and as directed by the Engineer-in-charge. 'Notes : '1) The contractor shall provide the sundry materials such as rubber gaskets, screws, MS tie rods etc. No extra payment will be made for it. '2) If any aluminium sections are required, the same will be measured and paid under relevent item.

Providng and fixing Aluminium Grill 10 mm thick "DECO GRILLE" make Model No. DG - 102 or product meeting technical parameters in natural Silver anodising of min 15 Microns with a opening size of 80 mm x 66 mm and Minimum weight of 3.13 Kg/ Sq.M including providing anfd fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-Charge .Aluminium alloy shall be of 6063-T6 with Yield strength of minimum 6.5 kg/ sq.mm.

Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding.

Carrying out Civil Engineering works like surveying & leveling,checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredients ratio plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and its application in brickwork, plaster, flooring & waterproofing works and other finishing works as per BARC specifications and relevant documentation, compiling, binding and preparation of tender documents and argeements keeping all data in computer as data entry operator, overall as directed by Engineer-in-charge. 'Note : '(1) Each Job shall be carried out by one qualified Technician having minimum HSC/ SSC or Trade Certificate in the Masonry/Plumber/ Carpenter /Painter Trade of not less than One year duration from ITI/ /Govt. recognized Vocational Training Institute. '(2) Deployment: The contractor shall deploy one Technician for each job for 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. '(3) Period of work: The contractor shall carry out the Jobs per day for the period as mentioned in NIT. Measurement will be per job basis.

Carrying out construction safety implementation works like daily walk through survey, monitoring and complaints of safety requirements, implementing usage of safet gadgets, ensuring safety norms at work site, reporting unsafe condition to the site engineer and preparation of safety reports all as directed by the Engineer -in-charge. 'Note: (1) Each Job shall be carried out by one qualified Safety Steward having minimum SSC with one year of Construction safety feild experience or SSC with certificate course in Construction Safety by MSME or equivalent Training Institute,with basic knowledge of First aid. (2) Deployment: The contractor shall deploy one Safety Steward for each job for 6 working days per week for minimum 8:30 hrs per day with 30 minutes of break, in General (Ist / IInd) or on round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continous pouring of concrete or shutdown/ maintainance work, the person will have to stay longer ocassionaly as per the instruction of the Engineer-in-charge. No additional payment will be made on this account. (3) Period of work: The contractor shall carry out 1 Job per day for the period mentioned in NIT. '(4) Mode of Measurement: Measurement will be per job basis. A single job shall be carried out by deploying one Safety Steward exclusively for the particular job.

Providing and fixing approved quality 7 Lever Night latch including necessary screws etc in wooden doors complete all as directed at site .

Providing and fixing aluminium aldrops of size 250 X 16 mm ISI marked anodised transparent or dyed to requried colour or shade with necessary screws, bolting from rear side complete as per specifications and as directed by the Engineer-in-charge

Providing, supplying fixing 'EBCO' make H-GDH 3275 or product meeting technical parameters, (Stainless steel glass door handle-H SS304, dia 32mm X 750mm) for sliding glass door shutters complete in all respect.

Providing, supplying fixing 'EBCO' make BPS7-S10 or product meeting technical parameters, (glass door PVC seal, guide) for sliding glass door shutters complete in all respect.

Providing, supplying fixing 'EBCO' or product meeting technical parameters make (sliding frameless glass door floor Lock of SS304) with necessary screws & fittings on floor etc. complete as per specification and as directed by the Engineer-in-charge.

Providing, supplying fixing 'EBCO' or product meeting technical parameters MINI hinges full overlay, half overlay, inset with necessary screws etc. complete as per specification and as directed by the Engineer-in-charge.

Providing, supplying fixing 'EBCO' or product meeting technical parameters Magnetic catch, ultra slim, magnet inset with necessary screws etc. complete as per specification and as directed by the Engineer-in-charge.

Supplying and fixing Rolling shutters of approved make as per ISI standards made out of required size of MS lathes 18 gauge interlocked together throughout entire length and jointed together at the end by end locks mounted on specially designed pipes shaft with brackets, side guides and arrangements for inside & outside locking with push and pull operation complete including the cost of providing and fixing necessary springs of required size and M.S. top cover of required thickness for rolling shutters.

Rolling shutters gear operated type with handles including top hood 0.90 mm thick

Extra over the cost of rolling shutters for providing and fixing motorized arrangements (with remote & manual operation) including designing, control panels, limit switches, required wiring and cables from panel to motor and required size of shaft etc. of approved quality all as per standard specifications including commisioning and testing complete as directed by the Engineer-in-charge. (only power supply point will be provided.)

For rolling shutters up to 15.00 sq.m opening area.

Extra for providing grilled rolling shutter manufactured out of 8 mm dia MS Bar instead of lathes as per specifications, design approved by the Engineer-in-charge complete.

Providing and fixing aluminium hanging heavy quality floor door stopper ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete.

Providing and Fixing in position Suspended false ceiling system using 600 x 600mm Calcium Silicate Ceiling tiles (AEROLITE ceiling systems or product meeting technical parameters) Tiles having 15mm densified edges and 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC and approvred surface design and edge profile (TEGULAR/ SPINTONE) placed in a suspended grid of size of 600 x 600mm made of hot-dipped G.I steel sections having an exposed surface capping of pre-finished baked polyester painted coil wherein the main tee of size 24mm x 38mm x 0.33mm shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wire with necessary level adjusters and cross tees of size 24 x 28 x 0.33mm x 1200 mm shall be inserted in to slots between the main tees at 600mm centres and thereafter in direction vertical to the longer tees, cross tees of size 24 x 28 x 0.33mm x 600mm shall be inserted to form a grid size of 600 x 600 mm resting on the perifery walls on wall angles of size 20mm x 20mm x 3000 mm x 0.40 mm thickness. The rate shall include providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings. The work shall be carried out as per directions of Engineer-in-charge. The main tees to be suspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips. the entire grid system shall be designed to bear a distributed load of minimum 15 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment). AEROLITE False Ceiling- tiles- Cosmos / Spintone / Hexa / Quadra Models with micro look system.

Providing and fixing in position suspended false ceiling system using 12 mm thick calcium silicate boards (HILUX ceiling systems or product meeting technical parameters,) 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC placed in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sections wherein the ceiling sections of 0.55 mm thick shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wires/ 1 mm thick strip hangers made of G.I sheet sections with necessary level adjusters and inter channels of 0.90mm thick with connecting clips and resting on the perifery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge. The main tees to be suspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips/ G.I strip Hangers at 600mm centers . the entire grid system shall be designed to bear a distributed load of minimum 25 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment).

Design, fabrication, supply and installation of frameless sliding panels (sliding doors) using 10mm thick clear toughened float glass door leaves including making cutouts/ holes, finishing the edges with crystal edge polish, sealents, transparent leave gasket etc. complete all as per approved shop drawings, specifications and as directed by Engineer-in-charge. Glass area alone shall be measured and paid. (Shop drawings to be prepared by the contractor as per the site conditions and the same shall be got approved by Engineer in charge before procurement. All necessary fittings, locks, handle shall be paid under relevant Item)

Providng and fixing 12 mm thick Cement based particle board of BISON PANEL or product meeting technical parameters with 1 mm thick Lamination sheet Sued/Mat finish of approved colour/ shade in approved design/patten with approved wood anti bubble waterproof adhesive and fixing the same in existing aluminium frame for wall panelling with C.P brass / stainless screws, decorative fastners etc. (Rear side of boards to be painted with approved wood primer) including providing 1mm groove in lamination complete as per architectural drawings and directions of Engineer-in-Charge.

Providng and fixing 18 mm thick Cement based particle board of BISON PANEL or product meeting technical parameters with 1 mm thick Lamination sheet Sued/Mat finish of approved colour/ shade in approved design/patten with approved wood anti bubble waterproof adhesive and fixing the same in existing aluminium frame for wardrobe with C.P brass / stainless screws, decorative fasteners etc. (Rear side of boards to be painted with approved wood primer) including providing 1mm groove in lamination complete as per architectural drawings and directions of Engineer-in-Charge.

M/S A.M CONSTRUCTIONS