REPAIR AND RESURFACING TO ROADS FURNITURE AND MARKING OF ROADS AT AF STN CHANDINAGAR UNDER GE (AF) FARIDABAD

Amount

M&L for repairs to pot holes area n.exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 30 mm in depth and making good by applying tack coat with bitumen of grade VG 10 @ 5 Kg/ 10 Sqm, putting in premixed bitumen of grade VG 30 well rammed, sealed with binder @ 9.8 Kg /10 Sqm blinded with 0.09 cum of stone chipping of 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes exc 30 mm, rolled with power road roller of 08 to 10 tonne complete all as specified and directed.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags or compressed air to remove all loose dirt etc on black top surfaces complete all as specified and directed.

M&L for Premix using paving bitumen of grade VG-30 with 4.00% binder content (VG-30 grade) by weight of total mix, mixed in Computerised Hot Mix Plant and spread by means of Self Propelled Mechanical Paver, rolled and compacted to required camber and gradient by using mechanical power road roller of 8 to 10 tonne capacity (consolidated thickness 75mm or less) complete all as specified and directed.

M&L for applying evenly a priming /tack coat with bituminous primer using paving bitumen of grade [email protected]/10 Sqm on existing black top surfaces complete all as specified and directed.

M&L for applying evenly a priming /tack coat with bituminous primer using paving bitumen of grade VG10@5Kg/10 Sqm on existing black top surfaces complete all as specified and directed.

M&L for bituminious premix semi-dense asphaltic concrete 30mm (consolidated thickness) using paving bitumen of grade VG-30 with 5.5% binder content (VG-30 grade) by weight of total mix, mixed in Computerised Hot Mix Plant and spread by means of Self Propelled Mechanical Paver, rolled and compacted to required camber and gradient by using mechanical power road roller of 8 to 10 tonne capacity complete all as specified and directed. Note : (i) The mix design shall be got done from approved lab and got approved from GE before commencement of work. (ii) In the event of variation in the mix design in the percentage of binder content on minus side, the difference in quantity of binder content will be adjusted as per actual rate of procurement or market rate, which ever is more of grade VG-30 bitumen. However no adjustment shall be applicable if excess quantity of binder content is used/approved in the execution of work under this item.

Demolition of bricks (laid flat or on edge) or bricks tiles in floors, channels, kerbs, aprons etc (each layer) laid dry or laid dry and pointed including removing from site complete all as specified and directed.

M&L for continuous brick edging, with width equal to the width of brick, laid dry on end vertically embedding to the ground with burnt clay old size sub class 'B' bricks complete all as specified and directed.

M&L for preparation of new previously untreated surfaces to receive the thermoplastic paint and making of guide lines, dashes, arrows, letters etc with reflective thermoplastic paint 2.0mm to 2.50mm thick exc 10 cm wide, white, golden, yellow or black colour as required, using glass beads necessary for achieving reflection on roads, pavements and the like of any description and any width complete all as specified and directed.

S&F in repair solar powered road stud (Cat eye) of size 125x125x20-25mm thick (60mm shank) of self illuminating flashing type having 3 Nos LED's for bidirectional studs (flashing and non flickery) visibility minimum 1000mm flashing rate 65-75 times per min with detachable NI-MH battery of 1.2 V to give backup at least 3-4 days from duly charged condition and it should be attached just before fixing and should not be accessible once installed made of robust aluminium die-cast housing with embossed edges for protection against bullock cast iron wheels having reflection strip in addition to LED's stud from biomanchor water proof IP-65 protection as per IS-12063-1987 category 2 tested satisfactorily for minimum 100 hours under rapid thermal cycling test as per IEC 1215 between-40 to + 80 degree centigrade temperature, weight minimum 700 grams complete all as specified and directed.

Net Contract Sum will be after deducting Sch of Credit of Rs 1,220.00

OM SAI ASSOCIATES AND DEVELOPERS

H.B. Traders

airstack india

Maa Vaishno Enterprises

High Tech Metal India