REPAIR MAINTENANCE OF INTERNAL ELECTRIFICATION AND SUBMAIN WIRING IN BLDGS INCLUDING ELECTRICAL FITTING AND FIXTURES CEILING FAN GEYSERS ETC AT KANKINARA AREA UNDER GE (NORTH) KOLKATA

Amount

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside to store in safe custody or for taking credit including making good of the disturbed surfaces complete all as specified and directed.

Material and labour for point wiring (Concealed type) with PVC insulated FRLSH cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC rigid conduit (medium grade) of adequate size with fittings and accessories pressed steel sunken terminal box made out of 1.6 mm thick MS sheet concealed in wall duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick laminated sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light point controlled by one way switch complete all as specified and as directed. (Note: Chases cutting and making good the disturbed surfaces to match with the existings shall deemed to be included in the quoted rate)

All as per Item No. 2 above but for one ceiling fan/ exhaust fan point controlled by one switch and one regulator complete all as specified as directed.

All as per Item No. 2 above but for one 3/5pin 6 Amp Socket outlet on the independent board complete all as specified as directed.

All as per Item No. 2 above but for one 3/5pin 6 Amp Socket outlet on the same board complete all as specified as directed.

All as per Item No. 2 above but for one call bell point controlled by one switch complete all as specified as directed.

All as per item no 2 above but for FRLSH PVC insulated 1100 volts grade unsheathed single core multistranded copper conductors 2.5 sqmm for fixing of 16 A switches, sockets, etc complete all as specified as directed.

Material and labour for point wiring (surface type) with PVC insulated FRLSH cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing caping (medium duty) double lock type, size of casing caping as required at site but not less than 20mm with fittings and accessories, including pressed steel sunken terminal box made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light point controlled by one way switch complete all as specified and as directed.

All as per Item No. 8 above but for one ceiling fan/ exhaust fan point controlled by one switch and one regulator complete all as specified as directed.

All as per Item No. 8 above but for one 3/5pin 6 Amp Socket outlet on the independent board complete all as specified as directed.

All as per Item No. 8 above but for one 3/5pin 6 Amp Socket outlet on the same board .

All as per Item No. 8 above but for one call bell point controlled by one switch complete all as specified as directed.

All as per item no 8 above but for surface type point wiring FRLSH PVC insulated 1100 volts grade unsheathed single core multistranded copper conductors 2.5 sqmm for fixing of 16 Amp switches, sockets, etc complete all as specified as directed.

Supply and fix switch piano flush button 5 Amp single pole one way 240 volt complete all as specified as directed.

Supply and fix socket out let 3/5 pin 5 Amp 240 volt complete all as specified as directed.

Supply and fix switch socket combination 3/5 pin 5 Amp 240 volt complete all as specified as directed.

Supply and fix switch socket combination 3/6 pin 15 Amp flush type 240 volt complete all as specified as directed.

Supply and fix celling fan regulator (step regulator) switch type AC 230 volt suitable for ceilling fan any sweep complete all as specified as directed.

Supply and fix bell push 6 amps complete all as specified as directed.

S&F call bell ding dong type AC 230 volt single pole complete all as specified as directed.

S&F lamp holder PVC/Polycarbonate type with backplate suitable for batten fittings complete all as specified as directed.

Supply and fix celling rose surface, 3 terminal ISI marked complete all as specified and directed.

Supply & fix Modular switch, one way, 6 Amp, 1 module complete all as specified and directed.

Supply & fix Modular socket, 6A-2/3 pin combined 2 Module complete all as specified and directed.

Supply & fix Modular switch, one way, 16 Amp, 1 module complete all as specified and directed.

Supply & fix Modular socket, 6A/16A-2/3 pin combined 2 Module complete all as specified and directed.

Supply & fix Modular Bell push 6A,1 Module complete all as specified and directed.

Supply & fix Modular electronic fan stepped regulator, 120 watt, 2 module complete all as specified and directed.

Supply and fix Modular white cover plate with frame- 1 Module complete all as specified and directed.

Supply and fix Modular white cover plate with frame- 2 Module complete all as specified and directed.

Supply and fix Modular white cover plate with frame- 3 Module complete all as specified and directed.

Supply and fix Modular white cover plate with frame- 4 Module complete all as specified and directed.

Supply and fix Modular white cover plate with frame- 6 Module complete all as specified and directed.

Supply and fix Modular white cover plate with frame- 8 Module complete all as specified and directed.

Supply and fix box type luminiare, pre coated in white and pre-wired for single LED tube light 4 ft capacity suitable for single T8 LED tube rod 4ft 20 watt complete with LED tube rod T8, 20 W, 4ft long with extruded aluminium body, PC diffuser and inbuilt driver, holder, prewired fitted and connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fitting including taking down old unserviceable fitting any type complete all as specified and as directed. Make: Century LED Ltd cat part no TWPP020C For rod and KCCF200 for Fitting battten/Surya Cat No SLETLDS18PALEXT for rod & SUB118T8LED for batten/ Wipro Cat No LL13-181-SESL for rod & W10921208 for batten or equivalent Model of Makes specified in PS here-in-after.

Supply and fixing LED batten mirror light 10 Watt extruded aluminium body, PC diffuser and inbuilt driver, prewired with electronic driver and diffuser and all accessories fitted on wall / ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down the old light fitting any type complete all as specified and as directed. (Make : Century/Surya/Philips/Wipro/Havells)

Supply and fix LED bulk head light fitting 12 Watt IP 65 protection with inbuilt driver prewired to be fixed on wall/ ceiling complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size including taking out old unserviceable fitting any type complete all as specified and directed. (Make : Century/Surya/Philips/Wipro/Havells)

Supply and fix LED STREET light/Building security light 45 Watt die cast aluminium housing with IP-65 protection and surface mounting device LED 45 Watt with lens with inbuilt driver prewired and SPD 5 KV building security luminaire including all fixing arrangement required to fixed on pole/ wall with suitable size of GI bracket including suitable size of fixing items such as clamps, nut bolts and washer of suitable size with connection complete including taking down old light fitting any type complete all as specified and directed. Make - Century LED Ltd Cat part No. - SPSP045C / Wipro Cat no LR13611xxx57xx / Philips/Surya cat no SLE UL 45WLXN or equivalent Model of Makes specified in PS here-in-after.

Material and labour for sub-main wiring with two run of FRLSH PVC insulated unshethed single core multi-stranded copper conductor of size 1.5 sqmm and one run of 1.5 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring all as specified and directed (Note : (i) Three run of 1.5 sqmm wire one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of wire and also making good surfaces are deemed to be included in unit rate).

Material and labour for sub-main wiring with two run of FRLSH PVC insulated unshethed single core multi-stranded copper conductor of size 2.5 sqmm and one run of 2.5 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring all as specified and directed (Note : (i) Three run of 2.5 sqmm wire one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of wire and also making good surfaces are deemed to be included in unit rate).

Matetial and labour for sub-main wiring with two run of FRLSH PVC insulated unshethed single core multi-stranded copper conductor of size 4 sqmm and one run of 4 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Three run of 4 sqmm wire one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of wire and also making good surfaces are deemed to be included in unit rate).

Matetial and labour for sub-main wiring with two run of FRLSH PVC insulated unshethed single core multi-stranded copper conductor of size 6 sqmm and one run of 6 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Three run of 6 sqmm wire one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of wire and also making good surfaces are deemed to be included in unit rate).

Supply and fixing TPN DB 4 way double door horizontal type 415 volts suitable for four pole MCB TPN as incomer including make good of damaged surface/wall including re-connection with existing earth wire to DB incuding taking out the old unserviceable one complete all as specified and as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand)

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 8 way 240 volts, including taking down the old unserviceable DB complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand)

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 4 way 240 volts, including taking down the old unserviceable DB complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand)

Supply and fix metal DP enclosure with DIN rail channel suitable for mounting MCB SPN 240 volts including taking down the old enclosure and connection complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand)

Supply and fix metal FP enclosure with DIN rail channel suitable for mounting MCB TPN 240 volts including taking down the old enlcosure and connection complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand)

Supply and fix MCB TPN 63 amps, 415 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand)

Supply and fix MCB TPN 40 Amps, 415 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand)

Supply and fix MCB TPN 32 Amps, 415 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand)

Supply and fix MCB single pole & neutral 40 to 63 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand)

Supply and fix MCB single pole & neutral 32 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand)

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand)

Supply and fix Blanking plate for MCB DB complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand)

Supply and fix 3 pin plug top 16 Amps for geyser 25/35/50 Ltrs complete all as specified and directed. (Make : C&S/Indoasian/Havells/L&T/Legrand)

Supply and fix 3 pin plug top 6 Amps for air circulator wall mounted fan/ floor mounted pedestal fans complete all as specified and directed. (Make : C&S/Indoasian/Havells/L&T/Legrand)

Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 16 Sqmm 2 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof complete with cable end, lugs including required size of aluminium thimble for making connection including taking down old unserviceable cable of any type and size completed all as specified and directed.

Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 16 Sqmm 4 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof complete with cable end, lugs including required size of aluminium thimble for making connection including taking down old unserviceable cable of any type and size completed all as specified and directed.

Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron earth lead wire 4.0 mm dia length upto 7.5 mtr by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (light grade) not exc 7.5 mtr, alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion including taking out old earthing complete all as specified and directed.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire including taking out old wire complete all as specified and directed.

S&F GI pipe 15 mm bore 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking out old pipe complete all as specified and directed.

Taking down carefully storage type water heater (Geyser ) of any make of capacity 25/35/50 Ltrs after removing all electrical and water connection from installed position at different locations,dismantling the geyser into parts for inspection.Checking /testing of all parts/accessories like appratus plate,heating element,thermostat switch,neon lamp, water tank,safety valve, spacer ring, rubber gasket,nut-bolts,inspection plate, bottom& top cover etc and complete,de-scaling of water tank and brazing the same to make it leak proof complete inclduing replacement of unserviceable spare parts and re-installation, making electric and water connections and testing complete all as specified and directed. Note : (a) Old unserviceable parts required for replacement shall be measured & paid separately all as specified and directed. (b) Painting if required shall be measured and paid separately all as specified and directed.

Supply and fixing Apparatus assembly plate (8/9 hole) with geyser coil for Geyser of 25 /35 /50 Ltrs capacity, as per existing type and model complete all as specified and directed.

Supply and fixing thermostat straight stem type as per existing model complete all as specified and directed.

Supply and fixing heating element 1500 watt suitable for Geyser of 25 Litres capacity as per existing type and model complete all as specified and directed.

Supply and fixing heating element 2000 watt Gyser of 25/35/50 Ltrs capacity as per existing type and model complete all as specified and directed.

Supply and fixing Indicating lamp LED type,as per existing model (Red/Green) (square/round) batten type for Geyser of 25/50 Litres capacity complete all as specified and directed.

Supply and fixing 15 mm dia 450 mm long PVC flexible cold water inlet pipe nut type complete all as directed. Make: Prayag /suprimo or equivalent as approved GE.

Supply and fixing 15 mm dia 450 mm long hot water pipe (inlet wire mess and nut type) water inlet pipe complete all as specified and directed.

Supply & fixing 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated after taking down old one complete all as specified & directed.

Supply & connecting PVC insulated and overall PVC sheathed and flexible multistranded copper conductor cable 3 core of size 2.5 sqmm for 25/35/50 Ltrs capacity Geyser after taking down old one complete all as specified and directed.

S&F Electronic constant current Driver for LED fitting of size 18-20 watt, 240 volts,, 50 Hz of any type as per existing fitting complete all as specified and directed.

S&F Electronic constant current Driver for LED fitting of size 36-45 watt, 240 volts, 50 Hz, of any type as per existing fittings complete all as specified and directed.

Taking down carefully the ceiling fans 1200 / 1400 mm sweep of any make/model any type and size from existing position of high rise shed/ bldg from their existing position after disconnecting blades including other accessories / components, cleaning / greasing including rewinding burnout/worn-out winding and reassembling all components by provision of new and old serviceable components and fixing / hanging in existing position after repair/painting work complete all as specified and directed. Note: (i) The spares shall be measured and paid separately under supply only items. The labour element involved for replacing the spares shall be deemed to be included in the unit rate quoted. (ii) Painting shall be measured & paid separately. (iii) Rewinding burnout/worn-out winding shall be measured & paid separately

All as per item No. 74 above but for Exhaust Fan metal body of size 230/ 300 mm complete all as specified and directed.

All as per item No. 74 above but for Exhaust Fan metal body of size 450/600 mm complete all as specified and directed.

All as per item No. 74 above but for Pedestal fan heavy duty metal body of size 450/ 600 mm complete all as specified and directed.

Supply only GM Bush for ceiling/ exhaust/ wall mounted/ pedestal fan complete all as specified & directed.

Supply only ball bearing for ceiling/ exhaust/ wall mounted/ pedestal fan (Bearing No. 6201) complete all as specified & directed. Make TATA/SKF/NBC

Supply only ball bearing for ceiling/ exhaust/ wall mounted/ pedestal fan (Bearing No. 6202) complete all as specified & directed. Make TATA/SKF/NBC

Supply only ball bearing for ceiling/ exhaust/ wall mounted/ pedestal fan (Bearing No. 6203) complete all as specified & directed. Make TATA/SKF/NBC

Supply only capacitor of 2.0 mfd capacitance complete all as specified & directed.

Supply only capacitor of 2.50 mfd capacitance complete all as specified & directed.

Supply only capacitor of 3.15 mfd capacitance complete all as specified & directed.

Supply only capacitor of 4.0 mfd capacitance complete all as specified & directed.

Supply & fixing MS sheet folded type louver for 230/300 mm sweep exhaust taking down old louver complete all as specified & directed.

Supply & fixing MS sheet folded type louver for 400 mm sweep exhaust taking down old louver complete all as specified & directed.

Material & labour for painting of ceiling fans 1200 / 1400 mm including blades/down rods/ canopy/stand, casing/ cage and all accessories after thoroughly rubbing /cleaning old rusted spot and paint by soft wire brush with one coats of synthetic enamel paint of existing tint and marking MES No. complete all as specified and directed.

All as per item No. 88 above but for Exhaust Fan metal body of size 230/ 300 mm complete all as specified and directed.

All as per item No. 88 above but for Exhaust Fan metal body of size 450/ 600 mm complete all as specified and directed.

Material and labour for rewinding of ceiling fans armature of 1200 mm/1400 mm sweep any make/ model with new super enamelled high grade copper wire of existing gauge with number of turns including provision of proper insulating materials and heat varnishing and testing complete after replacement of burnout winding complete all as specified and directed.

Material and labour for rewinding of exhaust fan 230mm/ 300mm sweep any make/ model, single phase, 230 volts with new super enamelled high grade copper wire of existing gauge with number of turns including provision of proper insulating materials and heat varnishing and testing complete after replacement of burnout winding complete all as specified and directed.

Material and labour for rewinding of exhaust fan 450/600 mm sweep any make/ model, single phase, 230 volts with new super enamelled high grade copper wire of existing gauge with number of turns including provision of proper insulating materials and heat varnishing and testing complete after replacement of burnout winding complete all as specified and directed.

Material and labour for rewinding of air circulator wall mounted fans/ pedestal fans 450/600 mm sweep any make/ model, single phase, 230 volts with new super enamelled high grade copper wire of existing gauge with number of turns including provision of proper insulating materials and heat varnishing and testing complete after replacement of burnout winding complete all as specified and directed.

Supply and fix cable junction box of inside dimension 140x140x95 with provision of 4 Nos connector for cable of suitable size to be fixed on pole/ wall with suitable size of clamp, nut bolts and washer including taking down old unserviceable junction box complete all as specified and as directed. Make - Hensel/ Syntex/ National

Supply and fix cable junction box of inside dimension 250x250x150 with provision of 4 Nos connector for cable of suitable size to be fixed on pole/ wall/ angle with suitable size of clamp, nut bolts and washer, angle etc required at site for fixing of junction box including taking down old complete all as specified and as directed. Make - Hensel/ Syntex/ National

Supply and fix cable junction box of inside dimension 350x270x200 with provision of 4 Nos connector for cable of suitable size to be fixed on pole/ wall/ angle with suitable size of clamp, nut bolts and washer, angle etc required at site for fixing of junction box including taking down old complete all as specified and as directed. Make - Hensel/ Syntex/ National

Supply and fixing in replacement of fan blades for exhaust fan 230/ 300 mm sweep any make/model (as per existing sample) complete all as specified and directed.

Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutters 250 mm sweep, 230V, AC 50 Hz, copper winding and mounting accessories complete all as specified and directed.

Supply and fix sheet steel enclosure fitted with plug & socket metal clad AC box with MCB SP 20A including insulated neutral link, adjustable DIN rail channel and connecting links complete after taking down the old socket board and connection complete all as specified as directed.

Supply and fix decorative wall light fixture city 1 type made up of polycarbonate suitable for 9 W retrofit LED lamp B22 base to be fitted on wall including necessary electric connection with three core twisted flexible copper cable of suitable size from existing electric supply to connector of light fitting complete including taking down old unsv light fitting complete all as specified and directed. Make - Havells Cat Part No - LHDL02160099 / Wipro / Philips or equivalent Model of Makes specified in PS here-in-after.

Supply and fix LED light fitting (celing) recessed/ surface mounted 600mm x 600mm 36 watt LED provided with high transmission crylic cover cieling including necessary electric connection with three core twisted flexible copper cable of suitable size from ceiling rose to connector of light fitting complete including taking down unsv light fitting complete all as specified and directed. Make - Century LED Ltd Cat No PCV036C /Surya cat no SLE DS 36 W22S/ Wipro Cat no CRCO10S036HP57G2 or equivalent Model of Makes specified in PS here-in-after.

Supply and fix in repair vertical TPN DB with MCCB incomer of 4 way in double door suitable for four pole MCCB (63A/100A) as incomer including MCCB+12 modules incoming and outgoing making good the damaged surface/wall including reconnection with existing earth wire to DB complete all as specified and as directed. (Note:- MCCB shall be measured and paid seperately).

Supply and fix in replacement of MCCB 4 Pole, 100 Amps,AC, 415Volt , rapturing capacity 16 KA with adjustable thermal setting and adjustable magnatic setting as per site including suitable size of connector and fixing materials such as thimble, nut bolts, etc of suitable size complete all as specified and directed.

Supply and fix in replacement MCCB 63 Amps, four pole, 415 volts,16 KA as per site including suitable size of connector and fixing materials such as thimble, nut bolts, etc of suitable size complete all as specified and directed.

Supply and fix power unit combo 20 Amp MCB protected socket complete including taking down the old socket and connection complete all as specified and directed. (Make : C&S/Indoasian/Havells/Bentec/Legrand)

Supply and fix metal clad 20 A SPN plug suitable for metal clad AC box complete after taking down the old plug and connection complete all as specified as directed. (Make : C&S/Indoasian/Havells/Bentec/Legrand)

Supply and fix metal clad 20 A SPN socket suitable for metal clad AC box complete after taking down the old socket and connection complete all as specified as directed. (Make : C&S/Indoasian/Havells/Bentec/Legrand)

Supply and fix AC motor starter 16 Amp suitable for AC power socket box complete after taking down the old socket board and connection complete all as specified and directed. Make: C&S / L&T/ Havells / Indoasian

Supply and fix AC motor starter 25 Amp suitable for AC power socket box complete after taking down the old socket board and connection complete all as specified and directed. Make: C&S / L&T/ Havells / Indoasian

M/s P.K.Ghosh

M/S KARTICK DUTTA

NANDYENTERPRISES

MAZUMDER AND CO

S Majumder and Construction

CHOWDHURY SMALL INDUSTRIES

SENCO