Repairing AND renovation of electrical installation IB

Dismantling charges for the existing electrical installations (Lights, Fans, Switch Boards, Cables, Damaged Wires etc.), Cleaning of existing wall bracket lights, hanging lights and re-installing the same and minor mending goods the damages by 2 Nos. Semi-Skilled and 2 Nos. Unskilled labour for 2 Days.

Refixing of of existing 1 No. SPN DB & 1 No. TPN DB concealed in wall after cutting the wall and mending goods the damages and concealing of existing surface wires after cutting channels on masonary wall by electric operated cutting machines as necessary and re-arrangement of surface wiring cnduits as per direction of EIC of the statir case leading to the office chambers of ADG, I.B. & other senior officers and corridoor area nearest to the office chambers by 2 Nos Semi-Skilled and 2 Nos Unskilled labour for 4 Days.

S & F 240V, (2+8) Way double door SPN MCB distribution board with IP-42/43 protection including 40A DP MCB isolator, 8 Nos. 6-32 A SPMCB concealed in wall after cutting the wall and mending good the damages to original finish incl.inter connection with suitable size of copper wire and netural link & provision for earthing attachment as required (Legrand) all MCB's are C-Curve and having 10 kA breaking capacity. (Make: Legrand)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]

(i) Average run 11 mtr.

(ii) On Board.

S & F 240 V, 1 No. 16 A, 3 pin Modular type plug socket with 1 Nos. 16 A Modular switch & 1 No. 6 A, 3-pin Modular type plug socket with 1 No. Modular Switch (Brand approved by EIC) on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying and fixing 20mm PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works.

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.

(i) 19 mm dia 3 mm thick polythene pipe without earth continuity wire.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.

(i) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm

(ii) 2 x 2.5 sq.mm + 1 x 1.5 sq.mm

(iii) 2 x 4 sq.mm + 1 x 2.5 sq.mm

(iv) 2 x 6 sq.mm + 1 x 4 sq.mm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

(i) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm

(ii) 2 x 2.5 sq.mm + 1 x 1.5 sq.mm

(iii) 2 x 4 sq.mm + 1 x 2.5 sq.mm

(iv) 2 x 6 sq.mm + 1 x 4 sq.mm

S & F of 240V, 7W, flexible neck for adjusting beam, bronze finished LED Picture light on wall and its necessary connections as direction of the EIC. (Make: Philips Muziris, Model No. 31402 / Eqv. Crompton)

S & F of E27 based pendant light fittings including 5 Nos. LED lamps (max wattage upto 20 Watt lamp each) hanging from ceilling including necy. fittings as per direction of EIC. (Make: Philips 582065 Lucidus 5H Pendant)

S & F of E27 based pendant light fittings including 1 No. LED lamps (max wattage upto 20 Watt lamp each) hanging from ceilling including necy. fittings as per direction of EIC. (Make: 582011 Marvel Pendant)

S & F 10 Watt two way wall washer on wall as per direction of EIC. (Make: 582061 Radiant Two-way Wall Washer)

S & F 240V, 7 W LED Spot light after cutting hole as per direction of EIC. (Make: COB Pro LED Spot Light / Eqv. Crompton)

S & F of 240V, 28 Watt, 5 meter length LED chain light having 72 Nos. LED per meter with LED driver. (Make: Philips Linea Bright (72 LED /Mtr) / Eqv. Crompton)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat25 mm x 6 mm on wall having clearance of 6 mm from wallincluding providing drilled holes on the busbar complete withGI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments to earth busbar including S & F 8 SWG GI (Hot Dip) wire on wall / floor with staples buried inside wall / floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

S & D of 240V, 1200 mm sweep AC ceiling fan having minimum speed of 320 rpm, minimum air delivery of 225 CMM and electric consumption of 44 Watt including all its accessories. (Make: Orient NEWBREEZE / Havells)

Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.