Loading…
Loading…
Tender ID
Tender Value
₹42.7 L
EMD Value
₹42,710
Closing Date
28 Apr 2026, 5:30 pmClosed
S.E.BBSR RandB Divn No.3 Bhubaneswar
In front of Nirman Soudha Unit 5 Bhubaneswar Dist Khordha Odisha
Repair and Restoration of Khandagiri square to Jagamara square Road cutting by TPCODL for Cable laying such as providing GSB WMM BM and BC with thermoplastic painting for the year 2025-26 for Ch.0.000KM to 1/100KM
2026_EICCL_128113_1
eTCN-01 of 2026-27
Open Tender
Civil Works - Roads
Percentage
30 days
Bhubaneswar
Pl refer DTCN01
2 documents required · 2 mandatory
₹6,000
₹42,710
Yes
15 Apr 2026
15 Apr 2026
29 Apr 2026
15 Apr 2026
28 Apr 2026
15 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work excavation of foundation trenches in hard soil including dressing and leveling the bed up to the required depth and disposing the excavated materials at places away from the work site with initial lead and lift, including shoring, shuttering including cost of all labour, sundries & T & P etc. required for the work complete as directed by Engineer-in-charge. | - | Cum | - | - |
| 2 | Supplying and filling in foundation trenches and plinth with coarse river sand well watered and rammed in layers not exceeding 23 cm. in depth with all leads and lifts including cost, conveyance, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge. | - | Cum | - | - |
| 3 | Construction of granular sub-base by providing close graded Granular Sub-base Grading-III material as per table 400-1,spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H specifications for Road & Bridge work(4th Revision) | - | Cum | - | - |
| 4 | Providing laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant , carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibrator roller to achieve the desired density as per caluse 406 of MoSRT&H specifications for road and bridge works(4th Revision) | - | Cum | - | - |
| 5 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60kg/sqm using mechanical means as per clause 502 of MoSRT&H specifications for road and bridge works(4th Revision) | - | Sqm | - | - |
| 6 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributer at the rate of 0.20kg/sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per clause 503 of MoSRT&H specifications for road and bridge works(4th Revision) | - | Sqm | - | - |
| 7 | Providing and laying 50mm thick Bituminous Macadam using crushed aggregates of Grading-II & 60/70 penetration grade bitumen premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per Clauses 501.6 and 501.7 to achieve the desired compaction and as per Clause 504 of MoSRT&H specifications for Road and Bridge works (4th Revision) | - | Cum | - | - |
| 8 | Providing & laying Bituminous Concrete of grading -II using crushed stone Gr.-II materials & 60/70 penetration grade of bitumen, preparing preemixed materials with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per clauses 501, 503 and 508 of MoRT&H Specifications for Road & Bridge works (4th Revision). | - | Cum | - | - |
| 9 | Providing and laying of hot applied Thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250gms. Per Sqm. area (for road marking) thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level uniform and free from streaks and holes etc. complete in all respect as per Clause 803.1, 803.2, 803.4.1, 803.4.2, 803.4.3, 803.4.4, 803.4.5, 803.4.6, 803.6 to 803.8 of MORT&H specification for road and bridge work (4th. Revision) and direction of Engineer-in-charge. | - | Sqm | - | - |
| 10 | Carriage of dislting materials /over burden earth and/ dismantled materials from the work site and disposing off the same within 5 km. lead by mechanical transportation including loading & unloading ,hire and running charges of machineries, cost of all labour, sundries and T&P. etc. complete | - | Cum | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.67 MB
DTCN001.pdf
Tender Documents • 2.06 MB
BOQ_587797.xls
BOQ • 0.30 MB
2905eTCN01.pdf
PDF • 0.74 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .