Meerut Cantt Ward No 6 Tanki MOhalla me Interlocking Tiles road Constuction Work

Amount

Iterlocking Tiles Road Construction Work

Providing, Laying, Spreading and compacting machine crushed stone ballast of approved quarry of hand packing, Rolling with Smooth wheel Roller 80-100 KN in stage to proper camber Applying Brooming, with Roller 80-100 KN in stage to proper camber Applying Brooming, with type B Screening material bund to protect edge lighting gaurding barricading etc i/c cost of material labour T&P etc

RCC in 1;1.50;3 mix with cement, c/sand & 20 mm stone gritt i/c all in slabe si no 284A

Add difference cost of Colour tile 20% of item no6

M-15 Brick work in 1:4 one cement & four corse sand 2.20 F.M. Morter in foundation & plinth including supply of all materials labour tools & plant etc. Required for proper completion of the work as per si no -305A

Supply & Laying of 80mm thick I shaped mechanical compressed interlocking cement concrete paver block Rubber mould with compressive strainth shall not be less then 40 MPA & 4.5 KG Per no i/c all complete with Fine sand 4 cm thick as per s.i no 20.38 New item

Concrete in 1:2:4 cement & coarse sand with 20mm gauge stone grite with materials' labour tool & plants i/c all complete as per s.i no 279 a in drain or as DPC

12 mm thick plaster with cement & course sand of 2.20 fineness mouslus in 1:4, over brick work required for proper completion of work as per direction of Engineer as per si no-584A

M.S. Iron work in plain reinforcement of RCC work over c/d works i/c all s.i no.504

Suply & Fixing of M.S. Sign board wade up of 40*40*6 mm angle iron (vertical post length 2.75 mtr), 40*5 mm flat cross angle 1mm thick ms sheet (1.20*0.90 sqm) including exavation of pit (0.45*0.45*0.45 cum), CC1:5:10 cement fine sand and Brick Balast 10cm thick, and cc 1:2:4 cement course sand & 20 mm grit (0.35*0.35*0.35 cum), Two coat painting latter writing up to 2.5 cm size (225 no) etc complete as per of Engineer incharge.

Add 12% G.S.T.

vivek enterprises