REPAIR /REPLACEMENT OF LEAKAGE WATER SUPPLY PIPE LINES AND OTHER CONNECTED MISC WKS OF ZONE C AREA AT MILITARY STATION UNDER GE (N) BIKANER

Amount

1. Note for item No1 to 88:- (i) All items considered in work for repair and maitenance at Mil Station Bikaner and different ASCON nodes located at 200 KMs away from Bikaner city. No extra cost for repair /replace of GI/DI/CI and connected items of pipe at Ascon nodes will be given to contractor. (ii) All the leakage of water supply pipe lines complaints shall be rectified by the contractor within 12 hrs from the launch of complaint time. If contractor shall be fail to rectified the above said complain in given time period then a penalty @ Rs 200/day will be recovered agaist the each job. (iii) All T&P and vehicles for transpotation will be provided by contractor. Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation etc or for laying of cables, pipes etc and getting out in soft/loose soil completed all as specified and directed by Engineer-in-Charge

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil completed all as specified and directed by Engineer-in-Charge

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point completed all as specified and directed by Engineer-in-Charge

Taking up or down galvanised steel tubing 15 mm bore (dia) including connections and fittings from trenches , walls, floors, etc complete all as specified and as directed by Engr-in-charge.

Taking up or down galvanised steel tubing 20 mm bore (dia) including connections and fittings from trenches , walls, floors, etc complete all as specified and as directed by Engr-in-charge.

Taking up or down galvanised steel tubing 25/32 mm bore (dia) including connections and fittings from trenches , walls, floors, etc complete all as specified and as directed by Engr-in-charge.

Taking up or down galvanised steel tubing 40 mm bore (dia) including connections and fittings from trenches , walls, floors, etc complete all as specified and as directed by Engr-in-charge.

Taking up or down galvanised steel tubing 50 mm bore (dia) including connections and fittings from trenches , walls, floors, etc complete all as specified and asdirected by Engr-in-charge.

Taking up or down galvanised steel tubing 80 mm bore (dia) including connections and fittings from trenches , walls, floors, etc complete all as specified and asdirected by Engr-in-charge.

Taking up or down galvanised steel tubing 100 mm bore (dia) including connections and fittings from trenches , walls, floors, etc complete all as specified and as directed by Engr-in-charge.

Taking up or down galvanised steel tubing 150 mm bore (dia) including connections and fittings from trenches , walls, floors, etc complete all as specified and as directed by Engr-in-charge.

Taking up old cast iron water mains 80mm bore (dia) with all fittings with spigot and socket ends and lead joints inclunding burning out joints etc complete all as specified and asdirected by Engr-in-charge.

Taking up old cast iron water mains 100mm bore (dia) with all fittings with spigot and socket ends and lead joints inclunding burning out joints etc complete all as specified and as directed by Engr-in-charge.

Taking up old cast iron water mains 150mm bore (dia) with all fittings with spigot and socket ends and lead joints inclunding burning out joints etc complete all as specified and as directed by Engr-in-charge.

Taking up old cast iron water mains 200mm bore (dia) with all fittings with spigot and socket ends and lead joints inclunding burning out joints complete all as specified and as directed by Engr-in-charge.

Taking up old cast iron water mains 250mm bore (dia) with all fittings with spigot and socket ends and lead joints inclunding burning out joints etc complete all as specified and as directed by Engr-in-charge.

Taking up old cast iron water mains 450 mm bore (dia) with all fittings with spigot and socket ends and lead joints inclunding burning out joints ,etc complete all as specified and as directed by Engr-in-charge.

M&L for cutting/dismantling of PCC hardstanding / WBM road with soling & premix carpet of any description for repair/replacement of water supply pipe lines and disposal of debris & rubbish to a distance exc 250m but not exc 500m and making good the same with & including plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as existing depth complete all as specified & directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 50 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 80 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 100 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 150 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 200 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 250 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 450 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 80mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil inluding dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 100 mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 150mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of jointexcluding necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 200mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 250mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 450mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil excluding dewatering complete all as specified & as directed. Note: Dewatering measured and paid seperattely under relevent items of Sch A

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 500mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil excluding dewatering complete all as specified & as directed. Note: Dewatering measured and paid seperattely under relevent items of Sch A

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 600 mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil excluding dewatering complete all as specified & as directed. Note: Dewatering measured and paid seperattely under relevent items of Sch A

Supply, laying, jointing & testing of Ductile Iron (DI) Pressure 80mm bore (dia) with Spigot & Socket Ends, Centrifugally Cast (Spun) with Cement Mortar Lining in Inner Side confirming to IS : 8392 /2000 in standard length for classification K-9 and other relevant standards and Metallic Zinc Coating followed by a finishing layer of Epoxy Paint in outer side, suitable for Push-on Joint (Rubber Gasket Joint) in any length and laid in Trenches, complete all as specified and as directed by Engr-in charge Make- Electro Steel/Tata/Jindal Note- Excavation,DI Specials shall be measured and paid separately . 2. Cost of rubber gasket joint shall deemed to be included in quoted rate.

Supply, laying, jointing & testing of Ductile Iron (DI) Pressure 100 mm bore (dia) with Spigot & Socket Ends, Centrifugally Cast (Spun) with Cement Mortar Lining in Inner Side confirming to IS : 8392 /2000 in standard length for classification K-9 and other relevant standards and Metallic Zinc Coating followed by a finishing layer of Epoxy Paint in outer side, suitable for Push-on Joint (Rubber Gasket Joint) in any length and laid in Trenches, complete all as specified and as directed by Engr-in charge NNote- Excavation,DI Specials shall be measured and paid separately . 2. Cost of rubber gasket joint shall deemed to be included in quoted rate.

Supply, laying, jointing & testing of Ductile Iron (DI) Pressure 150 mm bore (dia) with Spigot & Socket Ends, Centrifugally Cast (Spun) with Cement Mortar Lining in Inner Side confirming to IS : 8392 /2000 in standard length for classification K-9 and other relevant standards and Metallic Zinc Coating followed by a finishing layer of Epoxy Paint in outer side, suitable for Push-on Joint (Rubber Gasket Joint) in any length and laid in Trenches, complete all as specified and as directed by Engr-in charge Make- Electro Steel/Tata/Jindal Note- Excavation,DI Specials shall be measured and paid separately . 2. Cost of rubber gasket joint shall deemed to be included in quoted rate.

Supply, laying, jointing & testing of Ductile Iron (DI) Pressure 200 mm bore (dia) with Spigot & Socket Ends, Centrifugally Cast (Spun) with Cement Mortar Lining in Inner Side confirming to IS : 8392 /2000 in standard length for classification K-9 and other relevant standards and Metallic Zinc Coating followed by a finishing layer of Epoxy Paint in outer side, suitable for Push-on Joint (Rubber Gasket Joint) in any length and laid in Trenches, complete all as specified and as directed by Engr-in charge Note- Excavation,DI Specials shall be measured and paid separately . 2. Cost of rubber gasket joint shall deemed to be included in quoted rate.

Supply, laying, jointing & testing of Ductile Iron (DI) Pressure 250 mm bore (dia) with Spigot & Socket Ends, Centrifugally Cast (Spun) with Cement Mortar Lining in Inner Side confirming to IS : 8392 /2000 in standard length for classification K-9 and other relevant standards and Metallic Zinc Coating followed by a finishing layer of Epoxy Paint in outer side, suitable for Push-on Joint (Rubber Gasket Joint) in any length and laid in Trenches, complete all as specified and as directed by Engr-in charge Make- Electro Steel/Tata/Jindal Note- Excavation,DI Specials and rubber gasket joint shall be measured and paid separately .

Supply, laying, jointing & testing of Ductile Iron (DI) Pressure 450 mm bore (dia) with Spigot & Socket Ends, Centrifugally Cast (Spun) with Cement Mortar Lining in Inner Side confirming to IS : 8392 /2000 in standard length for classification K-9 and other relevant standards and Metallic Zinc Coating followed by a finishing layer of Epoxy Paint in outer side, suitable for Push-on Joint (Rubber Gasket Joint) in any length and laid in Trenches, complete all as specified and as directed by Engr-in charge Make- Electro Steel/Tata/Jindal Note- Excavation,DI Specials shall be measured and paid separately . 2. Cost of rubber gasket joint shall deemed to be included in quoted rate.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule. Make-Prakash Surya/Tata/Jindal

M&L for galvanized steel water tubing medium grade of 15 mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed. Make-Prakash Surya/Tata/Jindal

M&L for galvanized steel water tubing medium grade of 20 mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 20mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule. Make-Prakash Surya/Tata/Jindal

M&L for galvanized steel water tubing medium grade of 20 mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 20mm bore, complete all as specified and directed. Make-Prakash Surya/Tata/Jindal

M&L for galvanized steel water tubing medium grade of 25 mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 25mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule. Make-Prakash Surya/Tata/Jindal

M&L for galvanized steel water tubing medium grade of 25 mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 25 mm bore, complete all as specified and directed. Make-Prakash Surya/Tata/Jindal

M&L for galvanized steel water tubing medium grade of 40 mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 40mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 50 mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 50 mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule. Make-Prakash Surya/Tata/Jindal

M&L for galvanized steel water tubing medium grade of 80 mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 80mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule.

M&L for galvanized steel water tubing medium grade of 100 mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 100mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule. Make-Prakash Surya/Tata/Jindal

M&L for galvanized steel water tubing medium grade of 150mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 150mm bore, complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately under relevant items of this Schedule. Make-Prakash Surya/Tata/Jindal

Supply and fixing DI fittings (ISI marked) upto 150 mm bore such as bends (any type, radius & angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket & spigot), collars, caps & plugs suitable for spigot & socketed pipes, complete, fixed in repairs, all as specified & directed. Note :- (Earth work & lead jounts will be paid & measured separately respective item of Sch) & Joints shall be measured and paid for separately.

Supply and fixing Cast iron fittings (ISI marked) 200 mm to 300 mm bore such as bends (any type, radius & angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket & spigot), collars, caps & plugs suitable for spigot & socketed pipes, complete, fixed in repairs, all as specified & directed. Note :- (Earth work & lead jounts will be paid & measured separately respective item of Sch) & Joints shall be measured and paid for separately.

Supply and fixing Cast iron fittings (ISI marked) 450 mm to 600 mm bore such as bends (any type, radius & angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket & spigot), collars, caps & plugs suitable for spigot & socketed pipes, complete, fixed in repairs, all as specified & directed. Note :- (Earth work & lead jounts will be paid & measured separately respective item of Sch) & Joints shall be measured and paid for separately.

M&L for run lead joint for 80 mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 100mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 150mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 200mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 250mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 300/350 mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 450 mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 500 mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

M&L for run lead joint for 600 mm bore CI spigot & socket pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified & directed.

Supply & fixing mild steel clamps made of flat iron 40x6mm in two halves for tapping through 40 to 80 mm bore GI/DI water pipe line including drilling and welding of 15/20mm GI socket and necessary rubber insertion, nut, bolts & washers complete all as directed.

Supply & fixing mild steel clamps made of flat iron 50x6mm in two halves for tapping through 100 to 150mm bore GI/DI water pipe line including drilling and welding of 25mm G I socket and necessary rubber insertion, nut, bolts & washers complete all as directed.

S&F 15 mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 15 mm bore, complete, all as specified & directed.

S&F 20 mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 20mm bore, complete, all as specified & directed.

S&F 25 mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 25mm bore, complete, all as specified & directed.

S&F 40 mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 40 mm bore, complete, all as specified & directed.

S&F 50 mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 50 mm bore, complete, all as specified & directed.

M&L for repair to unserviceable sluice valve of size 80mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material on serviceable spindle, grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete, all as specified and directed.

M&L for repair to unserviceable sluice valve of size 100mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material on serviceable spindle, grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete, all as specified and directed.

M&L for repair to unserviceable sluice valve of size 150mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material on serviceable spindle, grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete, all as specified and directed.

M&L for repair to unserviceable sluice valve of size 200mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material on serviceable spindle, grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete, all as specified and directed.

M&L for repair to unserviceable sluice valve of size 250mm/300mm/350mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material on serviceable spindle, grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete, all as specified and directed.

M&L for repair to unserviceable sluice valve of size 450mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material on serviceable spindle, grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete, all as specified and directed.

M&L for repair to unserviceable sluice valve of size 500/600mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material on serviceable spindle, grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete, all as specified and directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 80 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 80 mm bore, complete, all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 100 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3 mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 100 mm bore, complete, all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 150 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 150 mm bore, complete, all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 200 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 200 mm bore, complete, all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 250 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 250 mm bore, complete, all as specified & directed.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 450mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 450 mm bore, complete, all as specified & directed .

Supply and fixing non return valve (NRV) of size 80mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed including dismantling & taking out old unserviceable non return valve.

Supply and fixing non return valve (NRV) of size 150mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed including dismantling & taking out old unserviceable non return valve.

Supply and fixing non return valve (NRV) of size 200mm bore, cast iron body, as per IS 5312 (ISI marked), heavy duty, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed including dismantling & taking out old unserviceable non return valve.

Material and labour for construction of brick masonary valve pit chamber of size 900x 900 x 600 mm (Internal dimension) using sub class ‘B’ bricks complete, earth work, PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation,brick masanary with sub class bricks 23 cm build in cement mortor with 1:6 , plastering of 10 cm thickness internally and 15 cm externally(1:4) cement mortor and below grond level PCC with 1:2:4 type B2 using 20mm grade stone aggregate ,coping 50 mm thick including frame of size 75x75x6mm made of angles iron and chamber cover made of MS sheet of 4 mm thickness double leaf including MS hinges locking arrangement with provision of locks and keys , painting of the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including necesarry excavation , returning & filling& removing of surplus soil etc complete all as specified and as directed by the Engineer in charge.

Material and labour for construction of brick masonary valve pit chamber of size 1500x1500x1500 mm (Internal dimension) using sub class ‘B’ bricks complete, earth work, PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation,brick masanary with sub class bricks 23 cm build in cement mortor with 1:6 , plastering of 10 cm thickness internally and 15 cm externally(1:4) cement mortor and below grond level PCC with 1:2:4 type B2 using 20mm grade stone aggregate ,coping 50 mm thick including frame of size 75x75x6mm made of angles iron and chamber cover made of MS sheet of 4 mm thickness double leaf including MS hinges locking arrangement with provision of locks and keys , painting of the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including necesarry excavation , returning & filling& removing of surplus soil etc complete all as specified and as directed by the Engineer in charge.

Supply and fixing in replacement cast iron Air release valve with two air outlets ,80 mm dia bore and fixing up in 450 mm dia bore cast iron water supply mains.

Supply and fixing in replacement cast iron Air release valve with two air outlets ,100 mm dia bore and fixing up in 500 mm dia bore cast iron water supply mains.

Supply and fixing in replacement cast iron Air release valve with two air outlets ,100 mm dia bore and fixing up in 600 mm dia bore cast iron water supply mains.

Dewatering from trenches and taking out of mude etc with the help of JCB or mud pump as required at site and taking out of broken/cracked pipe 450 /500/600mm bore including excavation, returning & filling, removing soil and making good disturbed surface on both side complete, all as specified & directed by Engineer-in-Charge.

All as per item No. 91 here in before but suitable for 250mm /200 mm bore complete, all as specified & directed by Engineer-in-Charge.

All as per item No. 91 here in before but suitable for 150mm complete, all as specified & directed by Engineer-in-Charge.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-15, suitable for 500/600 mm bore cast iron pipe/specials with nuts, bolts including necessary excavation & earth work in any type of soil including dewatering complete all as specified & as directed.

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes110 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed by Engr-in-charge. Note - Excavation shall be measured and paid separately

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 90 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed by Engr-in-charge. Note - Excavation shall be measured and paid separately

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 63 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed by Engr-in-charge. Note - Excavation shall be measured and paid separately

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 50 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed by Engr-in-charge. Note - Excavation shall be measured and paid separately

M & L Fully Automatic Star Delta starter suitable for 3 HP Motor In Sheet Metal Enclosure with single Phase Protection feature ( Motor Rating AC-3 Duty, 415 Volts, 50 Hz , 3 Phase complete with Timer, suitable cap relay , complete all as specified and as directed.

M & L Fully Automatic Star Delta starter suitable for 75 HP Motor In Sheet Metal Enclosure with single Phase Protection feature ( Motor Rating AC-3 Duty, 415 Volts, 50 Hz , 3 Phase complete with Timer, suitable cap relay , complete all as specified and as directed.

M & L Fully Automatic Star Delta starter suitable for 150 HP Motor In Sheet Metal Enclosure with single Phase Protection feature ( Motor Rating AC-3 Duty, 415 Volts, 50 Hz , 3 Phase complete with Timer, suitable cap relay , complete all as specified and as directed.

Dismantling of Oil type starter 75HP/150 HP and shifting to AGE E/M yard, from water tretment plant and Raw water beechwal.cost of T&P and labour required for dismantling and transportation shall deemed to be included in above quoted rate.

Supply and installation, testing, commissioning of monoblock pump set, 03 phase, 415 Volts , 03 HP capacity and preparation of foundation base and dismantling/cutting of pipe and making necessary connection with GI fittings and flange with existing pipe line, complete all as specified and directed by engr-in-charge.

Supply, fixing, installation, commissioning & testing of self priming automatic pressure pumping set with neumatic sensor, pressure tank of suitable including all connecting accessories complete set of 01 HP single phase 230 Volts AC supply complete all as specified and directed by engr-in-charge.

Supply, fixing, installation, commissioning & testing of self priming automatic pressure pumping set with neumatic sensor, pressure tank of suitable including all connecting accessories complete set of 0.5 HP single phase 230 Volts AC supply complete all as specified and directed by engr-in-charge.

Supply, laying , fixing , passing through pipe or cable tray PVC insulated & PVC sheathed unarmered Multi core copper conductor 1 core 95 Sqmm 1100 Volts Grade cable confirming to IS 694 complete all as specified and as directed.

S & F Cast Iron Foot valve of size 150mm to suction Pipe of Motor Pump set by disconnecting Lifting suction Pipe from shallow well/ UG Sump and fixing in Position after taking down existing unserviceable foot valve complete all as specified and as directed

Supply and fixing PVC house pipe green colour of size 150 mm dia complete all as specified and directed by EIC.

M/s Chopra Associates

A.S. CONSTRUCTION COMPANY

BIDAWAT ENTERPRISES