Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2.3 L
Closing Date
26 Aug 2026, 3:00 pmDue tomorrow
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
(PH-31)
Above/Below/Par
SRDSTEC
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' which ever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years,ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange,incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any work of Provision of Signal motor or point machine. The similar work should include wiring also if tendered work includes wiring.OR Any Signaling work which includes provision of Signal motor or point machine. The similar work should include wiring also if tendered work includes wiring.Note 1: Tenderer may be required to submit the schedule of those works, Completion/Performance Certificates of which have been submitted by him/her in support of 30/40 or 60% (as the case may be) criterion of similar nature of work.
20 conditions · 12 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Covering letter duly filled by the tenderer to be submitted on their letter head as per Annexure-I of Tender Document.
A copy of Authorization/Power of Attorney issued by the sole proprietor/partnership firm/LLP/ Society/JV/Company in favour of the individual to sign the tender on behalf of the sole proprietor/partnership firm/LLP/Society/JV/company as per clause no. 14 part -l of Tender Document. In case of company power of attorney must be backed by the resolution of Board of Directors and create liability against the company.
Details of Plant and Machinery already available with the firm must be uploaded.
List of engineers/personnel already available/ proposed to be employed for deployment on this work must be uploaded.
Details of Beneficiary for Electronic Transfer of Funds must be uploaded.
An undertaking by sole proprietor firm/all partners of the partnership firm/Power of attorney holder if company (as per Annexure-B/C uploaded with Tender Document ) or LLP or Society/JV that he/they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 (Part-II) of the General Conditions of Contract (as per Annexure-B/C uploaded with Tender Document). (Detail instructions/condition may be seen on Tender Document)
Please submit the copy of the registration certificate of firm, PAN, GSTIN (if applicable)etc.
Tenderers are compulsorily required to upload undertaking (attached as Annexure-A uploaded with Tender Document in part-IV) regarding Employment /Partnership of Retired Railway Employees attached as Annexure 'A'. Otherwise the tenderer will give full information as to the date of retirement of such Engineer or gazetted officer from the said service and as to whether permission for taking such contract, or if the Contractor be a partnership firm or an incorporated company, to become a partner or director as the case may be, has been obtained by the tenderer or the Engineer or officer, as the case may be from the President of India or any officer, duly authorized by him in this behalf, shall be clearly stated in writing at the time of submitting the tender. Note:- Tenders without undertaking or required information shall be summarily REJECTED.
The tenderer shall clearly specify whether the tender is submitted on his own or on behalf of a partnership firm/Company/Joint Venture (JV) /Registered Society/ Registered Trust/HUF etc. The Tenderer (s) who is/ are constituents of firm, company, Association or Society shall enclose self-attested copies of the constitution of their concern, Partnership Deed, copy of PAN Card and Power of Attorney along with their tender. Tender Documents in such cases shall to be signed by such persons as may be legally competent to sign themon behalf of the firm, Company, Association, Trust or Society, as the case may be. Following documents shall be submitted by the tenderer: (a)Sole proprietor Firm: (i) Affidavit of sole proprietorship firm. (ii) All documents in terms of explanatory notes in clause 14.0 PART-I of Tender Document (b) HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of explanatory notes in clause 14.0 PART-I of Tender Document. (c) Partnership firm, as per Tender Form-2 (Annexure-I) Para 14.10 PART-I of Tender Document: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) All other documents in terms of TENDER FORM -2 of Tender Document (d) Company registered under Companies Act 2013: (i) The copies of MOA (Memorandum of Association)/AOA (Articles of Association) of the company. (ii) A copy of Certificate of Incorporation. (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms of explanatory notes in clause 14 PART-I of Tender Document (e) Limited Liability Society: (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation of LLP. (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender/MoU/JV on behalf of the LLP and create liability against the LLP. (iv) All other documents in terms of explanatory notes in clause 14 PART-I of Tender Document (f) Registered Society & Registered Trust: (i) A copy of the Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society. (v) All other documents in terms of explanatory notes in clause 14 PART-I of Tender Document (g) Joint Venture: All documents as specified under Para 14 PART-I of Tender Document
No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suomoto post tender letters of the tenders shall be treated as NULL & Void as per Para 4.6 of STD- 2022
This tender will govern under "Indian Railway Standard General Condition of contract - 2022 or latest. Tenderers are requested to read GCC and tender document very carefully before submitting their Bid.
Performance Guarantee- The successful bidder shall submit PG as per procedure Mentioned in clause 5.1A of Northern Railway standard Tender Document 2022, The successful bidder shall submit the performance Guarantee(PG) amounting to 5% of the contract value
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self-attested/digitally signed by the tenderer or authorized representative of the tendering firm. Self attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered for evaluating his/their tender
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
Undertakings by Partnership Firm- In case the Letter of Acceptance (LOA) is issued to a partnership firm, the undertakings as per clause 18.10 of Annexure -VIII of Northern Railway Standard Tender Document 2022 shall be furnished by all the partners through a notarized affidavit, before signing of contract agreement.
As per Railway board letter No. 2018/CE-1/CT/4 dt. 17.10.2018 contractor shall mandatorily update the labour data on Railway Sharmik kalyan portal on monthly basis. The detailed guidelines are given in Clause 5.4 of PART-I of Standard Tender Document- 2022.
TTR- 160 Sets (FS+TWS+WCMS= 28 Sets, TWS+WCMS= 15 Sets, Only FS= 116 Sets, Trap-1 Set) over Moradabad Division
02rt2-SNT-TWS-MB-2025-26~NR
02rt2-SNT-TWS-MB-2025-26
Open
Works - General
12 Months
Moradabad, Uttar Pradesh
₹0
₹2.3 L
4 Aug 2026
4 Aug 2026
12 Aug 2026
29 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,17,35,026.66 | ||
| — | 17800.00 | — | — | ||
| Excavating and refilling of trench in Normal Soil to the level of ground with rammed earth as per drg. No.(NR/S&T/CON/1. 1/97-A) so as not to form a drain 0.3 Mtrs. Wide & 1 Mtr. Deep on both side of the station alongside the track. It shall conform to the safe distance as per signalling and cable route plan in all type of soil, It also includes clearance of routes of trees & bushes. Lesser depth due to site condition shall be paid proportionately after being decided in writing by Engineer in charge. Inspection Authority: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 14,67,254 | |
| — | 1000.00 | — | — | ||
| "Boring & Trenchless cabling along with supply & insertion of self lubricated HDPE pipe as per IS 4984:2016 of 110 mm outer dia with 6mm wall thickness in the bore for laying of Signalling / Telecom /Power cable under track/road/culvert at the depth of 3 mtrs etc.cable laying covered seperately. Inspection Authority: Supply: RITES Installation: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document" | — | — | — | 14,96,690 | |
| — | 142400.00 | — | — | ||
| "Supply and laying of 2nd class bricks in the trench and laying as per Drg. No. (NR/S&T/CON/1.1/97) as per instructions of the site Engineer. Inspection Authority: Supply: Consignee Installation: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document" | — | — | — | 10,66,576 | |
| — | 70000.00 | — | — | ||
| Laying of signalling/Telecom/power cables of different sizes as per drg. No. (NR/S&T/CON/1.1/97) and as per cable route plan approved by Railways and meggering of cable before and after its laying of all type of outdoor cables. Meggering to be done for each drum seprately. Meggering sheets to be supplied and filled up by contractor and submitted to railways. Inspection Authority: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 5,23,600 | |
| — | 10.00 | — | — | ||
| Supply of single app.case steel RE with 'E' type lock and key ward no.42 and handle as per drg. No. sketch no.RE/S&T/ALD/SK/219/82 and 221/82 with Alt.B.. Inspection Authority: Consignee Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 2,12,250.6 | |
| — | 10.00 | — | — | ||
| Casting, concreting and curing of foundation and erection of App. Cases (Single) as per drg. No.(NR/S&T/D&D/02/2024). All materials such as cement, sand, aggregate and anchor bolts shall be supplied by the contractor. App. Case single will be supplied by railway. Contractor is required to execute all type of repair works of foundations if required during inserting the cable for termination. Inspection Authority: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 47,277.9 | |
| — | 10.00 | — | — | ||
| Preparation & fixing of bakelite hylum sheet 910x800x6 mm and bakelite shelf 900x450x25 mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mmx25mmx3mm. Angle iron frame will be fixed in location boxes secured by nuts & bolts. Fixing of fuses, ARA terminal, plug in type Q series relays and other type relays on square bars fixing and jamming of cables with 2 inch thick salwood plank provided at the bottom. This will include opening, pasting and jamming armour of each cable in the hole drilled separately for each cable through the wood plank & all cable entry point on location boxes, location huts. JB's relay room/battery room to be closed with suitable masonry works covered with sand and plastering. Description for terminal drawing of circuits, inside app. Case. painting from outside as will inside with red oxide and aluminium paint is covered separately. Size of lettering will be 100 mm or as per instructions of Engineer at site. All material including bakelite shilf, hylum board, wood plank, angle iron square bar, wire and wiring material as per the IRS specn. nuts and bolts and other items shall be supplied by the contractor . Relays. ARA terminals & fuse only shall be supplied by the railway. App. case single not involving wiring of relays Inspection Authority: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 48,191.7 | |
| — | 855.00 | — | — | ||
| Termination of all the cores of all type of outdoor cable after its laying on both end. This also includes preparation of test report for core to core & core to earth on prescribed Performa for each core of the cable separately. This also includes dressing & lacing of cables on both ends. Performa for testing & material for lacing to be supplied by the contractor. Inspection Authority: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 10,285.65 | |
| — | 48.00 | — | — | ||
| Maintenance of track mounted equipmets like S&T fittings on turn outs including different activities during BCM/TTM/TTR works as follows: -Specially opening and refixing of DC-Tc jumpers/AFTC jumpers/Axle counters, transducers during different Engg. works. Opening of DC- TC/AFTC jumpers/axle counters transducers digging work from rail to TLJB/TMU/0 bond/location is required to be done as per site requirement also after refixing of DC-TC/AFTC jumpers/Axle counters transducers needs to be burried in proper depth. It includes drilling hole in rail as per site requirement. The team to be provided for this work should comprise of wireman-1 No., and Helper- 3 Nos. also it include any work of EOLB or sliding boom and earthing arrangement of signalling gears. Any other work as per instruction of Railway Engineer. All T&P & Jigs required to execute the work will be supplied by contractor. Inspection Authority: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 47,46,718.08 | |
| — | 10.00 | — | — | ||
| "Supply and burying of earth electrodes pipe of 3 metre length and 50 mm dia. pointed on lower end by tapering for a length of 150mm as per drg. No. NR / S&T /CON / 6.3 / 97 and connecting with lightening arrester or signalling gears as per std. practices. The item includes digging of pit in earth 3 Mtrs. deep and fixing earth electrode pipe in it. Earth pipe shall be burried in the ground to the length of 2.7 Mtr after welding 6 SWG wire at the lower end and fixing through nut and bolt at the top. This includes casting of cement concrete enclosures as per drg. No. NR/S&T/CON/6.4/97. The enclosure is to be plaster on all sides with cement & sand mixture of 1:4 ratio. The soil treatment shall be done as per standard practices. The item includes provision of earthing lead. Inspection by consignee. Inspection Authority: Supply: Consignee Installation: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document" | — | — | — | 25,304.3 | |
| — | 44.00 | — | — | ||
| "Components for Clamp Type Ground Connection for Point Machine 220mm Stroke. Consists of :- 1. Clamp Point Lock 60kg (TWS) for B.G to Drg.No. RDSO/S3395A- Alt-1 : 1 Set., 2. Drive rod to Drg.No. RDSO.S.3460 Alt- PTJ-1 : 1 No, 3. Drive rod lug to Drg.No RDSO.S.3461 Alt- PTJ-4 : 1 No, 4. Drop lug to Drg.No RDSO.S.3598 Alt-1 :4 Nos, 5. Switch Extension Bracket to Drg.No RDSO.S.3591, Alt-PTJ-1 : 2Nos, 6. Bush to Drg.No RDSO.S.3463 : 1 No, 7. Insulating Plate (RH) to Drg.No. RDSO.S.3592: 1 No, 8. Insulating Plate (LH) to Drg.No RDSO.S.3593: 1 No, 9. Insulating Bush for Detector rod drop lug to Drg.No CWM 02120 : 2 Nos, 10. Insulating Bush for Lock rod drop lug to Drg.No CWM 02220 :2 Nos, 11. Insulating Washer to Drg.No S.8640 :8 Nos, 12. Pin complete to Drg No. CWM 02320 :1No. Inspection Authority: RITES Technical Specification: As per technical specification provided in Part III of Tender Document" | — | — | — | 16,48,438 | |
| — | 44.00 | — | — | ||
| Fixing wiring testing and adjustment of point machines as per standard practice. It also includes. (i) Fixing, wiring, testing & extension 'P' bracket, providing insulation for switch extension bracket, fixing ground connections, adjusting the correct opening of switches and adjusting the point machine with crank handle. (ii) Wiring inside the point machine, erection & wiring of JB with lock & key as per drawing, provided with terminal strips (iii) Supply & fixing of GI pipes with flange for taking cable into point machine and junction box through pipe.(iv) complete material for installation, viz point insulation material, junction box, GI pipes, wiring materials, various fixing nuts and blolts and angle iron 75*75*10mm and insulation for strecher bar 90R/52/60 Kg as per RDSO drawing No. SA-23172(Adv) Alt.1 will be supplied by contractor.(v) smithy & fitting works required at site for complete installation insulation of gauge tie plate and providing insulation for GTP as per Drg.No.NR/S&T/CON/7.6/97 and williams stretcher bar will be done by, contractor Machine will be overhauled by contractor if required.(vi) Fixing of switch extension/D/P bracket, providing insulation for switch extension bracket fixing ground connection, adjusting the correct opening of switches and adjusting the point machine with crank handle.(vii) Renewal of point, this includes shifting of FPL and split streture bar detector, adjusting cranks etc. all smithy work, materials like bolt nuts coal , black oil etc supply by contractor. Inspection Authority: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 3,12,403.52 | |
| — | 44.00 | — | — | ||
| Supply and fixing of Spigot for point machines.: (Job = Per Pt.M/c) Inspection Authority: Consignee Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 11,365.64 | |
| — | Breakup | for details. | — | ||
| Supply of disconnect terminal Wago or similar as per spec. no.RDSO/SPN/189/2004 Ver 3.0 or latest as below: | — | — | — | 1,18,671.27 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
160TD_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].