Provn of baggage room for 11 ASC, footway and drainage near Building No P10 and misc B/R Services for GTO ground and infrastructure with shed at 19 Wing AF under GE(AF) Borjhar

Amount

B/R Portion

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil.

All as per item No.1.01 above depth exc 1.50m but n.exc 3.0m

M&L for plain cement concrete 1:4:8, type D-2, using 40mm graded stone aggregates as in foundations, filling and mass concrete complete all as specified and as directed..

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed..

Formwork to sides of pillars, posts, struts, piers, columns and stanchions.complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces complete all as specified and as directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed..

M&L for RCC Nominal mix,(1:1.5:3) type A1 using 20mm graded stone aggregates in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC Nominal mix,(1:1.5:3) type A1 mix, using 20mm graded stone aggregates in columns, pillars, piers, posts and struts complete all as specified and as directed..

M&L for RCC Nominal mix,(1:1.5:3) type A1 mix, using 20mm graded stone aggregates in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for RCC Nominal mix,(1:1.5:3) type A1 mix, using 20mm graded stone aggregates in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for RCC Nominal mix,(1:1.5:3) type A1 mix, using 20mm graded stone aggregates in chajjas complete all as specified and as directed..

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and as directed..

All as per Item No. 1.13 above but 6 to 8mm dia.

Ditto all as per item No.1.13 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed..

M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4. complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 on brick or concrete surface including finish even and smooth surfaces using without extra cement complete all as specified and as directed..

M&L for rendering 15mm thick in two layers, 10 mm in CM 1:6 and 5 mm in 1:4 with using WPC on brick or concrete surface including finishing the surface even and smooth without using extra cement. (Note: WPC will be measured and paid separately)

Supply only integral water proofing compound.

Anti termite treatment to backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

Anti termite treatment to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed..

Anti termite treatment to the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed...

Anti termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.

S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed..

S&F 35 mm thick, second class hard wood, plain framed paneled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneers or ply wood complete all as specified and as directed.

S & F second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc with sash bars but divided into squares, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed..

S&F floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and as directed..

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed..

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M&L for PCC 1:3:6 type C1, (using 20mm graded granite stone aggregate) in bed blocks etc., including necessary form work complete all as specified and as directed..

S&F mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles conforming to Fe 410-0 or Fe 310-0. complete all as specified and as directed.

M&L for two coats of oil bound distemper over a coat of primer on newly plastered surfaces including necessary preparation complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of external walls and applying two coats weather proof paint over a coat of primer all as per manufacturer's instructions. complete all as specified and as directed..

M&L PCC type B-0 (1:2:4) using 12.5 mm graded stone aggregate for leveling course average 25 mm thick. complete all as specified and as directed..

M&L for 15mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finishes.

Moorum/red bajri filling in floors or paving's, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed..

Hardcore of broken boulder or stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified and as directed..

M&L for chequered coloured cement concrete tiles 30cm x 30cm x 20-25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

M&L for precast cement concrete (1:2:4) type B-1, using 20mm graded stone aggregates as in kerb stones, apex stones, bed plates, pintle blocks, with plain fair faces, including chamfers, weathering's, throating etc. and setting in cement mortar (1:4), complete with joints to match complete all as specified and as directed.

Surface dressing n exc 15 cm deep in soft/ loose soil complete all as specified and as directed.

Rough excavation not exceeding 1.5 m deep and getting out in soft/ loose soil complete all as specified and as directed.

M&L for bringing approved earth from outside MD land forming embakment including raising earth, spreading in layer n.exc 30cm thick, watering, ramming/ rolling and finished to required gradient, size and shape etc, n.exc 1.50m from the base complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded stone aggregates as in sub base floor complete all as specified and as directed.

M&L for 75mm thick PCC 1:2:4, type B-1, using 20mm graded stone aggregates as in plinth protection all as specified and as directed.

M&L for 75 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in base concrete.

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in in foundations, filling and mass concrete complete all as specified and as directed..

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. complete all as specified and as directed..

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming Fe-290 (Gde E-165) complete all as specified and as directed.

S&F 20mm dia mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 30cm long complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for two coats of cement base paint on newly plastered wall surfaces including necessary preparation of surfaces complete all as specified and as directed.

M&L for three coats of white wash on newly plastered walls including necessary preparation of surfaces complete all as specified and as directed.

M&L for 50mm thick PCC (1:2:4), type B-0, using 12.5mm graded stone aggregates as in flooring and finishing the surface even and smooth using extra cement complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-1, (using 40 mm stone aggregate) and finished surfaces even smooth using extra cement complete all as specified and as directed.

M&L for rendering 10mm in CM (1:6) on fair faces of brick/ concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm in CM (1:4) on fair faces of brick/ concrete surfaces and finishing the surface even and fair without using extra cement complete all as specified and as directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, leveled and rammed including watering complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick, (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. complete all as specified and as directed..

M&L for glazed coloured ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

M&L for rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces as in backing coat to dado/ skirting complete all as specified and as directed..

M&L for 20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed..

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodized.

S&F 100 mm long medium weight, cold rolled mild steel butt hinges.

S&F 200mm long aluminium, anodized, barrel tower bolts of extruded section.

S&F anodised coated aluminium three track sliding window with frame using standard medium weight Jindal sections of weight not less than 0.55 Kg/m including glazing with 5mm thick sheet glass stainless steel wire cloth (1.40mm aperture and 0.63mm dia) aluminium snap beadings, decogrill DG-102 and F channel etc, complete all as specified and directed.

S&F interlocking aluminium anodised coated snap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Tee 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked at the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm. Aluminium alloy extruded section shall be aluminium anodized (minimum 15 micron) and shall conform to IS 733, IS-1285 and IS-737, and providing and fixing with Hangers of 4 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5 mm dia 40 mm long size of grid 600 x 600mm complete all as specified and directed.

M&L for 9 mm thick Armstrong "Armgyp" gypsum board size 595 mm x 595 mm fixed or laid/ inserted to aluminium frame work as in ceiling flat or sloping with screws (design and colour as per Engineer in Charge directions) complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm.

Removing excavated material exc. 500 m but n exc.1000 m and depositing where directed.

Removing excavated material to a distance exc. 500m but not exc.1.50 KM and depositing where directed.

M&L for providing cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed.

M&L for rendering 15mm thick in cement morter 1:4 on fair faces of wall surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete using extra cement Including forms moulds mitred/stopped end complete all as specified and directed.

M&L for precast reinforced cement concrete (1:2:4) type B, (using 20mm graded stone aggregate) as in cover slabs for drain etc and setting in cement mortar (1:4) complete. (Note:- Reinforcement bars shall be measured and paid separately).

Excavating over areas, n exc 1.5 m deep and getting out in soft/ loose soil.

All as per item No. 1.84 above but depth exc 1.5m but n.exc 3.0m.

All as per item No. 1.84 above but depth exc 3.0m but n.exc 4.50m.

M&L for cement concrete 1:2:4 type B2 (using 40 mm graded stone aggregate) as in in foundations, filling and mass concrete complete all as specified and as directed.

M&L for loose filling with broken bricks of size 80 to 150 mm in soakage pits, soakage wells complete all as specified and as directed.

Formwork to curved soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/ dense soil.

S&F for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc using FE-410w (gde E-250) complete all as specified and directed

E/M Portion

M & L Point wiring with 1.5 Sqmm PVC insulated and unsheatheed single core multi stranded copper conductor ISI marked 1100 volts grade drawn in concealed conduits & accessories on walls/roofs ceiling including fixing of 3 mm thick laminated sheet cover with MS box for fixing of switches/sockets etc including 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable for earth continuity and connecting to common earth dolly complete all as specified and directed. Note : Cost of cutting wall, plaster and painting included.

(a) One light point controlled by one switch.

(b) One ceiling/Exhaust fan point controlled by one switch and regulator.

(c ) One 3 pin 5 amps switch sockets controlled by one switch piano type SP 5 Amps on a board independent type from switches.

(d) One 5 Amps switch socket outlet on the same board with other switches.

All as per item Ser No 2.01 above but 2.5 sqmm cable for 3 pin 15 amps switch socket.

All as per item Ser No 2.01 above but 4 sqmm cable for 3 pin 15 amps switches .

S & F ceiling rose , 3 phase /PVC/Polycarbonate, isolated body.

S & F switches piano type for light /fan 5 amps single pole one way.

S & F only switch socket outlet 2 in 1, 3 pin, 5 Amps .

S & F switch socket combination 2 in 1.3 pin 5/15 amps flush type universal 240 bolts grade complete all as specified and directed.

Supply and fix LED tube light fitting. 1x18 Watt, Box type surface mounted 230 V, 4 ft etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and including one LED tube, 18 W complete all as directed at site complete. make - Crompton code no- LCTLN-18-CDL or equivalent bajaj/Havells

All as per item no 2.12 but for 9 watt Make : CROMPTON CAT NO : LCTLN-9-CDL/ Bajaj cat no BCLSB 10 NW/ Havells /CG/HCL

S&F lamp holder pvc /polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

Supply and fix LED Building light fittings 15 Watt pressure dia cast housing with epoxy power coated dark graphite grey coiour finish, polycarbonate cover with individual LED lenses with IP 65 protection complete ass as directed .Make- Crompton cat no LSTS-15-CDL/Bajaj Code-BCLST 15W LED

S & F 36W LED 5700K Ultra modern recess mounting luminaries suitable for armstrong/grid/POP ceiling complete with separate electronic driver & high brightness SMD LEDs Fixture size of ceiling 2 x 2 ft Make : Halonix cat part no HLFPU22-02-36 CW/ Crompton Cat part No LCTLRTF 6 -36 -CDL /Bajaj BCTBLR 36 W LED FPCW and equivalent /Philips/Havells/ C&S

S & F MCB DB SPN 8 ways 240 volts 50 cycles 1100 volts. M.ounting in concealed on wall

S & F MCB DB SPN 4 ways 240 volts 50 cycles 1100 volts. Mounting in concealed on wall.

S & F MCB SPN 6to 32 Amps 415 volts.

S & F MCB SP 5 to 32 Amps 240 volts.

S & F MCB SPN 40 to 63 Amps 415 volts.

S & F blanking plate for MCB DBs complete all as specified and directed.

Supply & fixing metal body exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables, heavy duty 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core.

Supply and fix Water heater storage type, electric, capacity 25 litres.BEE 5 star rated complete all as specified and directed.Make : USHA/HAVELLS/PHILLIPS/BAJAJ/CROMPTON

S & F chromium geyser connection pipe of length 45 mmm complete all as specified and directed.

S & F chromium angular Gate Valve of size 15 mm bore suitable for geyser complete all as specified and directed.

M & L Tubes, 'light grade' galvanised of dia 25 mm with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L submain wiring with two single core PVC insulated unsheathed stranded copper conductor 6 sqmm (nominal area) drawing through PVC CONDUIT IN CONCEALED ON WALL and 4 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly complete all as specified and directed. Note : Cost of cutting wall, plaster and painting included.

Earthing complete with GI Earth plate electric 600x600x6mm buried directly in ground vertically to a depth of not less than 2.25m below ground level with the top edge of earth plate at a depth of not less than 1.5mtr below ground level connected to GI earth lead 4mm dia by means of nuts bolts washers etc made out of galvanised iron and GI wire connected to main switch/ DB board including necessary excavation and earth work PCC (1:3:6) type C1 using 20mm graded stone aggregate earth chamber 40mm thick RCC cover type B1 (1:2:4) B1 using 20mm graded stone aggregate 20mm dia GI medium grade protection pipe upto main switch board etc complete all as shown in electrical plate No 5 of MES Schedule Part I.

S M ENGINEERING

M/s Capital Traders

M/S PRASANTA MAHANTA

M/s Dhruv Enterprises