Repair/Maint/Servicing of E/M Items at various locations under HQ 7 Sect AR.

SCHEDULE' A' PART-I (CELING FAN) Winding Winding of fan including replacement of bearing capacitor

Servicing and repairing of ceiling fan

Reparing/ repalcenent of bearing and capacitor including servicing

M & L for rewinding of ceiling fans of 1200 mm sweep of any make with supper enamelled copper winding wire appropriate gauge replacement of bearing including varnishing testing complete all as specifie and directed.

All as per item No 02 above but exhaust fan of sweep 275-300 mm.

SCHEDULE' A' PART-II (Desert Cooler) for repair/ servicing of desert cooler up to 4000 CFM capacity including replacement of canvas grass wool pads checking/repairing internal pre-wiring to make functional including replacement of unserviceable / defective spare parts all as specified and directed by Engr-in-Charge.

M & L in replacement of new fan motor 1/6 HP , 230 Volt AC (ISI mark) of desert cooler of any caoacitt with new winding as per existing including replacement of supporting legs, nuts and bolts etc.

M & L in replacement of water lifting pump 1/70 HP capacity, operated on single phase 230 volts with all accessories and testing.

Replacement of fan blade with bush for desert cooler motor as per existing size and shape.

Replacement of selestor switch/rotory knob four way suitable for desert cooler as per existing size and make.

supply only electronic control circuit board (PCB) as per existing type for desert cooler.

SCHEDULE' A' PART-III (Refrigerator) M&L for complete servicing and repair of Refrigerator/Deep Freezer of any capacity, servicing and cleaning of all accessories, oiling of fan motor, checking of wiring connections, and re-fixing in the same in position testing complete all as directed by Engr-in-Charge. (Unsv accessories will be measured and paid seperately under respective items of Sch)

Supply only the following items required to incorporate in item No 7.00 above:- Hermatic sealed compressor unit with new factory made sealed compressor unit, single phase electrically operated on 240 V suitable for Refigerator 165 Ltrs capacity

Hermatic sealed compressor unit with new factory made sealed compressor unit, single phase electrically operated on 240 V suitable for Refigerator 286/310 Ltrs capacity

Auto cut thermostate switch for Refrigerator defrosts type

Overload protectors for Regrigerations upto 310 Ltrs capacity

Copper strainer filter for Reftrigerator

Relays suitable for Refrigerators upto 310 ltr capacity

Supply only door switch for refrigerator

Supply only door spring for refrigerator

Magnetised door lock rubber strip 'D' type for regrigerator 286/310 Ltr cacpacity

Evaporator coil assembly 266/310 ltrs capacity regrigerator with copper pipe

Supply and filling gas charging required to the System of suitable type R-34/12/32 /R22 or as per existing at site

Supply and filling gas charging required to the System of suitable type 134a or as per existing at site

SCHEDULE' A' PART-IV (Water Cooler) M&L for complete servicing and repair of Water Cooler any capacity, servicing and cleaning of all accessories, oiling of fan motor, checking of wiring connections and re-fixing in the same in position testing complete all as directed by Engr-in-Charge. (Unsv accessories will be measured and paid seperately under respective items of Sch)

Supply only the following items required to incorporate in item No 5 above:- Hermatic sealed compressor unit with new factory made sealed compressor unit, single phase electrically operated on 240 V suitable for Water cooler 40/80 Ltrs

Fan/blower electric motor single phase 230 V complet for water cooler 40/80 or 60/120 Ltrs capacity water cooler.

Running capacitor of suitable capacity

Stratring capacitor of suitable capacity

Auto cut ther mostate switch for water cooler

Fan blade of suitable size

S&F Ball valve PVC 15mm size for water cooler 40/80 ltr capacity

SCHEDULE' A' PART-V (Ac 1.5/2.0) M&L for complete servicing and repair of Split type AC 1.5/2 Ton capacity incl taking down of air conditioner, servicing and cleaning of all accessories, oiling of fan motor, checking of wiring connections and re-fixing in the same in position testing complete all as directed by Engr-in-Charge. (Unsv accessories will be measured and paid seperately under respective items of Sch)

Supply only the following items required to incorporate in item No 1.00 above:- Hermatic sealed compressor unit with new factory made sealed compressor unit, single phase electrically operated on 240 V suitable for Split AC 2.0 T capacity

Hermatic sealed compressor unit with new factory made sealed compressor unit, single phase electrically operated on 240 V suitable for Split AC 1.5 T capacity

Fan/blower electric motor single phase 230 V complete for inner unit

Fan/blower electric motor single phase 230 V complete for outer unit

Stratring capacitor of suitable capacity

Running capacitor of suitable capacity

Overload protection of suitable capacity

Drain pipe for Split unit PVC 20mm

Remote control kit complete for Split type AC

Condencing unit of Split type AC 1.5/2 Ton capacity with complete accessories (Outdoor type) make: Godrej / LG

Cooling unit complete suitable for 1.5/2 Ton Split type AC with complete accessories (Indoor type) make : Godrej /LG

M&L for complete servicing and repair of Window type AC 1.5/2 Ton capacity incl taking down of air conditioner, servicing and cleaning of all accessories, oiling of fan motor, checking of wiring connections etc and re-fixing in the same in position testing complete all as directed by Engr-in-Charge. (Unsv accessories will be measured and paid seperately under respective items of Sch)

Supply only the following items required to incorporate in item No 3.00 above:- Hermatic sealed compressor unit with new factory made sealed compressor unit, single phase electrically operated on 240 V suitable for Window AC 2.0 T capacity

Auto cut thermostate of suitable capacity for window AC 1.5/2 Ton

Fan blade of suitable size for window type AC unit

Fan/blower electric motor single phase 230 V complete

SCHEDULE' A' PART-VI (RO) M&L for complete servicing and repair of RO Plant of any capacity, servicing and cleaning of all accessories and re-fixing in the same in position, testing complete all as directed by Engr-in-Charge. (Unsv accessories will be measured and paid seperately under respective items of Sch).

Supply only micron cartridge filter sponge 4" x 20" of 4 micron suitable for existing RO plant complete all as specified and directed.

Supply only micron cartridge filter sponge 2" x 10" of 4 miron suitable for existing RO plant complete all as specified and directed.

Supply only RO Membrane conceal 75 GLD suitable for existing RO plant complete all as specified and directed.

Supply only RO Membrane conceal 400 GLD suitable for existing RO plant complete all as specified and directed.

SCHEDULE' A' PART-VII (Geyser) M&L for disconnecting elect & water connection to geyser of cap 25/50/35 ltr, taking down, from existing position, dismantling and inspecting all the parts, for its serviceability, cleaning of serviceable parts i.e. Heating elemet, base assy, connecting lead, thermostat, electrical contact, electric wiring, indicators, safety valves etc and refixing, replacement of unserviceable parts, re assembling, remounting, reconnecting with electrical & water connectionn and testing complete. Notes(i) The defective parts to be replaced shall be measured and paid separately under relevant item of Sch 'A' as supply only. (ii) Cost of minor items i.e. Screws, nut & bolts etc shall be deemed to be included in the above item.

S&F of heating element 2.0 KW, ISI marked with gasket suitable for as existing size, type and make of geyser under repair.

All as per item No 7 here-in-before but of cap 1.5 KW.

S&F of thermostat ISI marked suitable for existing make of the geyser under repair of cap 50/25 /35 Ltrs.

S&F indicator lamp as per existing make and size.

S&F of geyser safety valve (pressure release valve) for the exsiting make & capacity of geyser.

S&F of geyser pipe connection heavy duty for inlet, outlet connection suitable to withstand the pressure and temperature for existing geyser complete.

S&F of aluminium/cromium type flexible connection heavy duty for inlet, outlet connection suitable to withstand the pressure and temperature for existing geyser complete

S&F only inner tank made out of steel sheet conform to IS suitable for 25 ltrs capacity of geyser of different makes vertical type all as specifie and directed.

All as per item No 14 here-in-before but but for Geysers of capacity 35/50 ltrs.

S&F new base assembly with inlet and outlet pipe made out of steel base plate with gasket and proper size of nuts, bolts and washer etc suitable for 25 ltrs capacity of geyser

M&L for taking down geyser of cap 25/50/35 ltr, from existing position, and fixing of new water heater of cap and fix electric water heater, storage type steel body with copper inner tank Ltr, star rating with all accessories complete all as specifie and directed.

S & F steel water tubing galvanised ,medium grade with all fittings and fixed complete to walls , or in floors, in old/new situation for bore of pipe following sizes: - (a ) 20 mm dia

S & F steel water tubing galvanised ,medium grade with all fittings and fixed complete to walls , or in floors, in old/new situation for bore of pipe following sizes: - ( b ) 15 mm bore.

S & F in repair gate / globe valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed bore of following size : - ( a ) 20 mm bore.

S & F in repair gate / globe valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed bore of following size : - ( a ) 15 mm bore.

SCHEDULE' A' PART-VIII (Solar water heater) M&L for complete servicing and repair of solar water heating system of any capacity, servicing and cleaning of all accessories and re-fixing in the same in position, testing complete all as directed by Engr-in-Charge. (Unsv accessories will be measured and paid seperately under respective items of Sch).

S&F solar collector glass suitable for existing solar water heating system complete all as specified and as directed.

Supply only Glycol for solar water heating system complete all as specified and as directed.

Repair to existing solar collector with copper brazing complete all as specified and as directed.

S&F heating element of capacity 3 KW, ISI marked suitable for existing solar water heating system complete all as specified and as directed.

S&F make up tank 5 Ltr capacity for existing solar water heating system complete all as specified and as directed.

S&F gasket and end joints suitable for existing solar water heating system complete all as specified and as directed.

SCHEDULE' A' PART-IX (Solar street light) Taking down old unsv solar street light fittings any type from pole and refixing, re-connecting the same in existing position after carrying out necessary repair / replacement of unsv accessories to make the fittings functional, complete all as speecified and directed. Note:- Accessories required to make the fittings functional shall be measured & paid seperately as supply only under relevent items.

Supply only LiFeP04 Battery, 12 Volt, 24/26 AH suitable for solar street light fitting complete all as specified and as directed.

Supply only Mono Crystalline SPV Panel suitable for solar street light fitting complete all as specified and as directed.

SCHEDULE' A' PART-X (Submersible Pump) M&L for Lifting /lowering unservicable submercible pump assembly completely any type/size up to 30HP along with coloum/delivery pipe of 50/80mm dia after disconnecting the electrical connection from the deep tube well/Dugwell of various depth, segregating components for carrying out repair work such as rewinding of burnt motor and serviceing of pump etc and reassemblying after repair, lowering in to the bore well, including aligning and commissioning complete all as specified and directed. Note (a) Unit rate quoted deemed to include only labour for taking up & lowering the submercible pump from bore well along with delivery pipe complete. (b) Repairs/rewinding of submercible pump shall be measured under relevant items. (c) Replacement of coloumn pipe will be measured and paid separately as in supply only under relevants items.

M&L for transporting the unsv submercible pump set upto 30 HP capacity from site to nearest authorised work shop, dismantling the pump motor assembly and rewinding the burnt motor with same gauge of PVC insulated supper enamelled copper wire as per manufacture's instruction including servicing/overhauling the pump, re-assemblying and brought back to site all as specified and and as directed.

Supply only following spare parts for submercible pump set vertical type up to 30 HP complete all as speified and directed. (a) SS impeller as per existing

b) Thrust bearing as per existing

(c) Thrust plate set as per existing

(d) Sand Guard as per existing

(e) Stainless steel bush as per existing

(f) Pump shaft as per existing

Supply only column pipe 50 mm dia galvanised iron medium grade, 3 meter in length & both ends flanged and duly welded complete all as specified and directed..

M&L for taking out unserviceable submersible motor upto 30 HP from the existing place and transporting the same to outhorised workshop dismantling and rewinding the burnt motor with suitable gauge of PVC insulated supper enamelled copper wire including re-fixing at same location including aligning and testing, commissioning complete all as specified and directed.

M&L for dismantling and taking out the centrifugal pumping set with motor from the existing foundation for carring necessary repair/ servicing by replacing the unservicable parts including fixing of new coupling (CI/rubber) as per existing all as required at site of work of capacity upto 40 HP, including re-fixing at same location including aligning and commissioning complete all as specified and directed. Note (a) Unit rate quoted deemed to include only labour for tpt and reapir. (b) Spares /rewinding of pump set shall be measured under relevant items.

Supply only following spare parts for centrifugal pump set up to 40 HP complete all as speified and directed:- (a) CI impellers

(b) Diffuser

(c) Neck ring

(d) Shaft bush

(e) Shaft

(f) Roller bearing.

(g) Stuffing box gland.

(h) Bearing 6307/6309/ 6312/7307/7308Make SKF/SBC.

Centrifugal Pump M&L for taking out worn winding of centrifugal pump motor of capacity upto 40 HP carefully and rewinding the same with existing size of super enamelled copper winding wire ,including necessary varnishing and insulating material baking etc, transportation to workshop and back at site complete all as directed by Engineer-in-Charge.

Taking down/disconnecting the existing unserviceble Star Delta starter of Centrifugal / submersible pump from motor control panels of various pump houses and replace with new Star delta starter of capacity 10 HP to 25 HP, three phase, including making electric connection, complete all as specified and directed. ( Make: C&S / BCH/ L &T)

M&L for repair of starter with disconnecting all electric connections, and replacment of unserviceable parts like contractor, relays, coil etc and connecting to the existing pump set of cap upto 60 HP, including testing complete all as specified and directed.

S&F Submersible cable flat Three core PVC insulated and PVC shedthed industrial copper cable of size 6 Sqmm 1100 Volts for connection from starter to motor complete all as specified and directed. Make: Finolex/ CCI/ Havells.

Preparation of surface for Painting of pump/ motor of any type and any capaicty and Pipe of any dia for complete surfaces for painting applying two coats of synthetic enamel paint over one coat of red oxide primer as per colour code on pump sets including SM/MES No of appropriate size of letters with white paint, complete all as specified and directed by Engineer-in-Charge.

M&L for cleaning of under ground sump, semi under ground sump of capacity 10000 to 50000gallons (Drinking water sump) after bailling out of water from tank & cleaning of all sides of wall , top, bottom with fresh water, with the help of pressure jet pump ( Maxium pressure up to 120 bar ) and vacuum suctioner pump, spray of chemical for anti fungal approved by WHO on all sides of walls after cleaning and applying two coats of white wash on external surfaces and writing date of cleaning on the tank complete all as directed by Engineer - in -charge .

Supply only chlorination chemical highly efficient (high strength) calcium hypochloride 65% to 70 % chlorine content based granular disinfectant more stable in sealed container, no Sodium/iron/ Mercury/Heavy metal contaminations. Make: PURI CHLOR or equivalent Note:- (i) The contractor shall produce manufacturer’s test certificate and purchase vouchers of calcium based granular disinfectant. (ii) The calcium based granular disinfectant shall be brought at site in sealed plastic container . (iii) Qty shown at Col 6 will not accepted at one time as the material having lesser expiry period.

M&L in repair to replacement of shaft with impellar of dosing pump suitable for existing at site and all as specified and as directed.

M&L in repair to replacement of coil 250V, 50 Hz, suitable for dosing pump suitable for existing at site and all as specified and as directed.

M&L in repair to replacement of pump tube suitable for dosing pump suitable for existing at site and all as specified and as directed.

M&L in repair to replacement of white suction/discharge tube of size 3/8" suitable for dosing pump suitable for existing at site and all as specified and as directed.

M&L in repair to replacement of furrule of size 1/4" suitable for dosing pump suitable for existing at site and all as specified and as directed.

M&L in repair to replacement of connecting nut with adapter of size 3/8" suitable for dosing pump suitable for existing at site and all as specified and as directed.

Transformers Repair/Maint of Transformers of various capacity including painting and disconnecting from LT/HT line and reconnecting properly through Lugs and top up of transformer oil and other defects to be rectify as per direction of EIC

Earthing with G.I. earth plate 600 mm / 600 mm / 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt complete all as specified.

Repair Winding /rewinding with copper coil of transformers, replacement of all meter of various capacity as per directions of EIC

DG Set Draining out the old engine oil from DG set, cleaning of deposits and rectifing the leakages if any by means of welding, brazing and cleaning of oil tank and filling of new Engine oil complete all as specified and directed by Engr in Charge. Note :- The engine oil shall be measured seprately.

M & L for Taking down radiator from DG Set of any type /make and capcity 20 to 45 KVA from base mounting , cleaning /descaling by using of air compressor and cleaning with suitable strain removal detergent along with chemical etc and rectifing water leakage by means of welding / brazing, after cleaning , descaling and rectifing of leakage etc. including replacement of all connecting parts i,e radiator hose pipe with clump , bolt nut washer , rubber bush packing materal etc and re-assembling the radiator fitting with DG set properly in original position checking the alignment making proper hose connecting testing for smooth operation complete all as directed . Note :- 1. The cost of replaced spares /parts is deemed to be included in quoted rates and no extra cost shall be paid to the contractor in this effect. 2. The make the own arrangement of transportation for all kind of necessary equipment /T & P shall be arranged /brought by contractor to complete the job at site or at E/M yard and no extra cost shall be paid to the contractor in this effect.

M & L for taking out of injector of DG Set of any type/make and capacity 20 KVA to 100KVA disconnection and opening of fuel injector assembly , carrying complete overhauling / servicing fuel injector system , including repalcement of injector repair kit calibration of injector , checking of pressure complete for each injector and re-assembling the same in original positon making proper fuel connnection and testing for smooth operation complete all as directed .

Opening /taking out of fuel injection pump (FIP) of DG Set of any type/make and capacity 20 KVA to 50 KVA disconnection of fuel injector line carrying complete overhauling /servicing of injecor pump, calibration of fuel pump as per manufacturer instruction , assembling of the same with DG Set properly in original position , checking the allignment , making proper fuel connection including renewal of unserviceable/defective minor parts like seal, 'O' ring, gaskit fuel pumpl, gear technometer, bushing technometer cover fuel pump gear housing fuel pump gear etc and testing for smooth operation complete all as directed , after replacement of following major parts if found defected/unserviceable :- Note Following items measured & Paid seperately.

(a) Fuel gear pump

(b) Shaft with fuel drive

All as per item No 5 here in before but 62.5 KVA to 100 KVA

(a) Fuel gear pump

(b) Shaft with fuel drive

Removal of self starter motor from the DG Set of capacity 20 KVA to 45 KVA of existing make , strip opening the starter for the renewal of minor parts like bush gear, o ring assy, bush set, sealing kit, brush set including assembling and re fixing at site complete all as specified and directed.after replacement of following major parts if found defected/unserviceable :- Note Following items measured & Paid seperately.

(a) Armature

(b) Solenoied switch

(c) Field Coil

All as per item No 14 here in before but 62.5 KVA to 100 KVA

(a) Armature

(b) Solenoied switch

(c) Field Coil

Removal & Renewal of old unserviceable feed pump for fuel injection pump complete assy for various capacity of DG Sets.

S & F in Renewal of fuel shut down solenoied valve kit including taking outold valve assy and making all connection testing for smooth operation in any type DG Set complete all as specified and directed by Engr-in-Charge.

M & L for 'B' check kit of DG set 20 KVA to 50 KVA

All as per item No 21 here in before but 62.5 KVA to 100 KVA

S & F in Renewal , Radiator cap suitable for DG set of any type /make and capacity complete all as directed.

S & F in Renewal , V belt of DG Set 20 KVA to 50 of as per existing make and capacity complete all as directed.

All as per item No 24. here in before but 62.5 KVA to 100 KVA KVA

M & L for top up of coolent in concentrate form rediator of DG Set of any type/Make and capacity , complete all as directed. Make :-Bosch, feelit guard & equalient Note: Measurement shall be done only in concentrate form of coolant.

S & F in Renewal of Fule hose flexible with matalic type from fuel tank to filter, filter to FIP including allied nut bolt washer and coupling for DG set 20 KVA to 50 KVA with and including taking out old hose and making all connection testing for smooth operation all as directd.

All as per item No 27 here in before but 62.5 KVA to 100 KVA

S & F in Renewal of radiator hose pipe suitable both inlet and outlet of 62.5 KVA to 100 KVA DG Set with including taking out old hose and making all connection , testing for smooth operation complete all as directed .

S & F in Renewal of 12 V 180 AH Battery tubler Make : Exide Express/Amoron

S & F in Renewal of 12 V 150 AH Battery Make : Exide Express/Amoron

S & F in Renewal of 12 V 100 AH Battery Make : Exide Express/Amoron

S & f in Renewal of battery terminals made of brass , suitable for battery of any type /make and capacity , complete all as directd.

S & F in Renewal of PVC insulated multi stranded copper single core unsheathed cable of size 70 sqmm , 1100 volts grade for battery lead Red snd Black colour and all as directed.

S & F Renewal of burnt /UNSV thermostat with new thermostat alongwith complete assy for DG set connection complete all as specified and directed.

Removal & Renewal of old u/s RPM CABLE of any type/make of DG set complete all as specified and directed by Engr -in- Charge .

Removal & Renewal of old U/S WATER TEMP METER of any type and all as specified and directed by Engr -in- Charge .

Removal & Renewal of old U/S OIL PRESSURE METER of any type and all as specified and directed by Engr -in- Charge .

Removal & Renewal t of old U/S OIL TEMP METER of any type and all as specified and directed by Engr -in- Charge .

Removal & Renewal of old U/S HCT Switch of any type and size of DG Set and all as specified and directed by Engr-in-Charge.

Removal & Renewal of old U/S LLOP Switch of any type and size of DG Set and all as specified and directed by Engr-in-Charge.

M & L for taking down of existing fuel from fuel tank by means of removing of sludge and sediments deposited inside the fuel tank by repeatedly washing by useing of chemical & detergent with air compressor including rectifing of leakage if found. and refixing the same position as per direction of engineer in charge by testing all as specified and directed. cap 20 KVA to 100 KVA DG Sets.

Opening and taking out of cylinder head 20 KVA to 180 KVA capcity DG Set Renewal of inlet and exhaust valve , valve guide seats and lapping of valve machining job pressure testing i/c replacement of u/s parts reassembling with complete testing as requd .

S & F in replacement of anti viberation mounting pad B series complete all as directed .

S & F distilled water in sealed packing for DG 12 volts battery.

S & F in Renewal of battery charging sets automatic type , fixed in DG set /panel with transformer and rectifire etc including rewiring of faulty control complte all as specified and directed by Engr-in-Charge.

All as per item No. 46.a but 12 V DC charging set

All as per item No. 46.a but 24V charging set

S & F in Renewal of by reconditioning of DG set panel board by means of painting by power coated with proper fixing of nut, bolts, hinges, welding and fixing of necessary door lock set of DG sets of any capacity with handle including double key complete all as specified and directed by Engr-in-Charge.

S & F in Renewal of Automatic voltage Regulator (AVR) suitable for DG Set of 40 KVA to 125 KVA capacity with and including taking out old AVR and making all connection testing for smooth operation complete all as specified and directed .Make : Tavr-20(k) , Stemford.

S & F in Renewal of Rotating diods suitable for DG set of Cap 40 KVA to 500 KVA with and including taking out old diods and making all connection testing for smooth operation complete all as specified and directed .

M & L for opening /taking out of turbo charger of DG Set of 40 KVA to 200 KVA capacity , disconnection of air supply connection pipe etc complete overhauling serviceing of turbo charger replacement of turbo charger repair kit including calibration /testing of turbo charger system complete and re assembling the same fitted with DG set properly in original position checking the alignment making proper all connection testing for smooth operation complete all as directed.

S & F in replacement of Exhaust Muffler of DG Set any type any cap and all as specified and directed by Engr-in-charge.

S & F in replacement of Expension bellow for exhaust of DG Set any type any cap and all as specified and directed by Engr-in-charge.

M & L for carrying out complete overhauling /servicing of DG Set panel /AMF Panel /control panel including checking and rewiring faulty electrical circuit using 1.5 sq mm FRLS copper conductor making all concections , CTs, push button, digital volt meter , digital amp meter and replace LED indicator and testing for smooth operation of any cap and all as directed.

S & F of MCCB, 200 Amp, 4 Pole , 415 Volts, 25 KA breaking capacity, adjustable thermal and magnetic setting complete all as specified and directed.

Renewal of MCCB, 100 Amp, 4 Pole , 415 Volts, 25 KA breaking capacity, fixed thermal and magnetic setting complete all as specified and directed.

Renewal of MCCB, 63 Amp, 4 Pole , 415 Volts, 25 KA breaking capacity, fixed thermal and magnetic setting complete all as specified and directed.

S & F Renewal of on line change over switch 200 Amp, 4 pole, front operated complete all as specified and directed.

S & F Renewal of on line change over switch 100 Amp, 4 pole, front operated complete all as specified and directed.

S & F Renewal of off load change over switch 63 Amp, 4 pole, side operated complete all as specified and directed.

S & F Renewal of off load change over switch 100Amp, 4 pole, side operated complete all as specified and directed.

S & F Renewal of off load change over switch 200 Amp, 4 pole, side operated complete all as specified and directed.

M&L Renewal of earthing complete with galvanized steel earth plate electrode 60cm x 60 cm x 6 mm thick buried directly in ground earth pit not less than 4.50 mtr deep below ground level with top edge of the plate not less than 3.75 mtr below ground level connected to galvanized earth strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of GI or steel surrounded with adequate quality of charcoal dust mixed with salt on all side of earth plate including complete earthwork PCC 1:2:4 chamber and RCC 1:2:4 cover all as shown in electrical plate No 5 and all as specified and directed by EIC

S & F Renewal of asbestos rope of 19 mm dia around of the exhaust pipe of diesel engine any cap complete all as specified and directed by Engr-in-Charge.

M & L for Renewal by removal taking out old burnt winding from exhaust fan and winding suitable size of copper wire of exhaust fan, ball bearing motor of any type and size and refixing the same including dismantling and all as specified and directed by Engr-in- charge.

Dismantling alternator assembly of the following capacities incl taking out of worn out windings of Rotor and stator incl rewinding the coils with suitable guage of copper wire, replacement of insulation materials, heat varnishing, replacacement of connecting leads and terminal plates all as required to make serviceable of the DG and including reassembling the same after necessary testing all as directed. The item rate includes shifting of altternatos from location to workshop and back to the installation complete all as directed Note : Copper wire shall be measured & paid separately under relevant item of the schedule.

M&L for copper winding for item No-87 above as per existing guage complete all as specified and directed

M&L and Renewal of Radiator water pump assy 320 kvat to 500 kva capacity complete all as specified and directed

S & F fuel cap suitable lock & key type of 62 to 500 KVA DG sets all as specified.

S & F Renewal of fuel shut down brass solionid valve make : cummines

S & F Renewal of electronic controller circuit board for engine governorr suitable for 400 kva DG Set

S & F Renewal of fan with moter size 600mm sweep suitable for 62.5kva air coolded DG set. All as specified and directed by engineer in charge. Note :- 1. The contractor will attend any breakdown of stand by supply in any location whenever required , rectify the fault and restore the stand by supply with in two days after receipt of complaint. 3. The cost of transportation (to and from) for all kind of necessary eqpt /T&P shall be arranged /brought by contractor to complete the job at site and no extra cost shall be paid to the contractor to this effect.

SCHEDULE OF CREDIT Old u/s heating element of any size

Old u/s water tubing, 20/15 mm dia incl fittings

Old u/s gate valves cast copper alloy of size 20/15mm

Ols US thermostate of any type

Old US geyser pipe any type

Old US inner tank any size and type

Old US battery any type

Old US Mono Crystalline SPV Panel any type

Old unsv bearing/ bushes/ capacitor/ brass bracket assy any type any size

Old unsv capacitor

Old unsv copper scrap

Old u/s compressor unit any type any size

Old u/s fan/blower motor any type any size

Old u/s capacitor /relay/thermostate switch any type any size

Old u/s cooling unit any type any size

Old u/s condensing unit any type any size

Old u/s remote control kit any type

Old u/s strainer filter any type

Old u/s capallery tube any type

Old U/S RO Membrane of any type.

Old u/s spares obtained from repair of submersible pump set complete

Old u/s spares obtained from repair of centrifugal pump set complete

Old u/s copper wire obtained form winding of pump set any type any size

Old u/s starter any type any capacity

Old unsv earthing material

Old u/s GI coloum pipe 50/80mm dia any type

Old u/s submersible cable any type any size

Old U/S engine oil

Old U/S fuel gear pump,shaft fuel drive of any size and capacity

Old U/S Armature, solenoied sweitch, field coil of any size and capacity of selfstarter

Old U/S fuel feeding pump, shut down valve kit

Old u/s B Check kit

Old U/S radiator cap of any size

Old U/S v belt of any size & capacity

Old U/S fuel hose pipe flexible type of any size

Old U/S radiator hose pipe of any size

Old U/S battery of any size

Old U/S battery terminals

Old U/S 70 sqmm copper cable single core

Old U/S thermostate, RPM cable,water temp gauge, oil pressure gauge, oil temp meter, HCT Switch, LLOP Switch of any type

Old U/S battery charging set of any size

Old U/S AVR of any size

Old U/S MCCB of any size

old U/S fan with motor

M/S A K SINGH

APS GROUP CONSTRUCTION