Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹37.8 L
EMD Value
₹37,790
Closing Date
10 Aug 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Engine Division, Koraput
HINDUSTAN AERONAUTICS LIMITED Engine Division, Koraput, Sunabeda- 763002
CONSTRUCTION OF ADDITIONAL NEW BADMINTON COURT WITH SHED.
6849
e TN NO W-02/24-25
Works
Mig Complex- Engine Divn-Koraput-Civil
₹1,120
₹37,790
10 Aug 2024
6 Apr 2024
6 Apr 2024
10 Aug 2024
Labour charges for earthwork excavation in trenches not exceeding 1.5 m wide in hard/dense soil , n exc 1.5 m in depth for foundation ; etc. and getting out , all complete as per specification and direction of Engineer - in - charge.
Labour charges for refilling of excavated earth including spreading , levelling , watering & well ramming in layers not exceeding 25 cm etc. all complete as per specification & direction of EIC.
Supplying, carrying to site all approved materials, providing filling, leveling, watering and consolidating with approved good quality river sand etc.all complete as per specification and direction of Engineer - in - charge.
Supplying , providing of all approved materials and laying of plain cement concrete of 1:4:8 using 40 mm down size coarse graded hard stone aggregate for levelling course in foundation at any depth including for trenches , pits, under floors, mass concrete and other similar work at all levels and height etc. including curing, all complete as per specification and direction of Engineer - in - charge.
Supplying , providing of all approved materials and laying of plain cement concrete of 1:2:4 using 12.5 mm down size coarse graded hard stone aggregate for levelling course in foundation at any depth including for trenches , pits, under floors, mass concrete and other similar work at all levels and height etc. including curing, all complete as per specification and direction of Engineer - in - charge.
Supplying carrying to site all approved materials & providing and laying in position TMT Mild steel bars of any dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, walls, foundations etc. and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips) all complete as per specification & direction of EIC.
Supplying carrying to site all approved materials & providing Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation, plinth beams; and similar work; vertical or to batter all complete as per specification & direction of EIC.
Supplying carrying to site all approved materials & providing Brick masonry work with burnt clay building bricks in CM(1:6), the compressive strength should not be less than 50kg/m2. The work also includes erection of safe and rigid scaffolding, curing etc. all complete as per specification and direction of Engineer - in - charge.
Supplying carrying to site all approved materials & providing 12mm thick plaster to the brick masonary surface etc. in CM (1:4) at all heights with erection of necessary scaffolding, including rendering ,floating, finishing the surface even and smooth, curing etc. all complete as per specification and direction of Engineer-in-Charge.
Supplying and carrying to site all approved materials and providing Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.. all complete as per specification and direction of Engineer - in - charge.
Supplying carrying to site all approved materials and providing two coats of painting with high gloss synthetic enamel paint of approved make / shade on structural steel surface over a coat of primer at all heights. The work shall include preparation of the surfaces by using sand / emery papers , cleaning removal of the scales , peeled surfaces filling the pits / depressions , nail - holes knots etc, by putty and applying paint to get uniform finish without any patches and brush mark including erection of safe / rigid scaffoldings cleaning the area after painting etc. a ll complete as per specifications and directions of Engineer - in - Charge.
Supplying carrying to site all approved materials and providing two coats Acrylic smooth exterior paint (weather coat ) of required shade ( Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on plastered surface at all heights. The work shall include preparation of the surfaces by using sand / emery papers , cleaning removal of the scales , peeled surfaces filling the pits / depressions , nail - holes knots etc, by putty and applying paint to get uniform finish without any patches and brush mark including erection of safe / rigid scaffoldings cleaning the area after painting etc. a ll complete as per specifications and directions of Engineer - in - Charge.
Supplying carrying to site all approved materials and providing two or more coats of distempering with 1st quality acrylic distemper( ready mixed) having VOC content less than 50gm /liters of approved manufacturer of required shaded colour including application of one coat of primer complete as per manufacturers specification on plastered surface at all heights. The work shall include preparation of the surfaces by using sand / emery papers , cleaning removal of the scales , peeled surfaces filling the pits / depressions , nail - holes knots etc, by putty and applying paint to get uniform finish without any patches and brush mark including erection of safe / rigid scaffoldings cleaning the area after painting etc. a ll complete as per specifications and directions of Engineer - in - Charge.
Supplying ,carrying to site all approved materials providing and fixing in position pre-painted / colour coated galvalume profile sheets (trapezodial pattern)of 0.50 mm thick.(Total coated thickness) with end crimp profile ,550 Mpa minimum,yield strength ,It shall be coated with hot dip alloy of 55% aluminium 43.50 % zinc 1.50 % silicon and finished with resin coat on both surfaces@150 gm/sqm of coating (Total both surfaces) having overall width & laid width as specified & shall be fixed using , the self drilling self tapping screwes shall be of required size as per site condition and the screws shall be fixed at suitable intervals as per standards procedure and direction of EIC.
The contractor has to provide screw caps suiting the matching colour of sheet to avoid corrosion due to weather action and to give asethetic look. The make of screws shall be from HILTI, CORROSHIELD, TATA & BUILDEX.Penetration & side as well as end laps in sheet shall be sealed by using butyl sealant taps and silicon sealant.HDPE fillers shall be provided wherever required to close voids between sheets,sheet & fasteners etc.Roof /wall clading sheets shall be factory cut & supplied in required length to suit the drawings,necessary overlaps as per manufacturers specification shall be provided.Safety nets of required size are to be provided under the roofing system during the execution of work. MAKE:- TATA BLUESCOPE, TATA STEEL BSL LIMITED, JSW (JINDAL), LLOYDS, KIRBY
Supplying carrying to site all approved materials and fixing in position 0.5 mm TCT colour coated/pre-painted plain galvalume sheet (AZ150-550 MPa) for corner/ barge boards, eaves, flashing and Barge capping north light curve etc, fixed to steel members with self drilling/self stiching fastners of required length with EPDM washer/ seals as per site requirement/drawing, etc.All complete as per Specifications and direction of Engineer-in-Charge. Make- TATA BLUESCOPE, TATA STEEL BSL LIMITED , JSW (JINDAL), LLOYDS, KIRBY.
Supplying carrying to site all approved materials and fixing in position Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 30 cm long a ll complete as per specifications and directions of Engineer - in - Charge.
Supplying, carrying to site all approved materials and fixing in position Factory made single extruded WPC(Wood Polymer Composite) solid door/ window/Ceosetory windows and other frames/ chowkath of required frame size 65x125mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) fabricated with miter joints after applying PVC solvent cement and screwed with full body treated star headed SS screws having minimum frame density of 750Kg/cum, screw withdrawal strength of 2200N (face) & 1100N (edge), minimum compressive strength of 58N/mm2. modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/border proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia. and length complete as per direction of Engineer in charge.
(MS hold fast /lugs or SS dash fasteners shall be paid for separately) Note: - For WPC solid door / window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made) of Frame size 65mmx100mm
Supplying and providing and fixing factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder / rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength 1800 N (face) & 900N (edge), minimum compressive strength 50N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both face of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer In charge. Note:- SS butt hinges and necessary SS screws shall be paid separately.
Supplying, Providing Powder Coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing above to (minimum thickness of powder coating 50 micron)etc. complete all as specified etc. all complete as per direction of Engineer in charge.
Supplying carrying to site all approved material and providing 4.8mm thick Sheet glass ground and obscured or froastred quality and glazing with oil putty in square n exc 0.5 sq. m in each pane etc all complete as per direction of enginner in charge.
Supplying carrying to site all approved materials & providing and fixing in position Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; railings; purlins, window grills and similar work etc all complete as per specification & direction of EIC.
Supplying carrying to site all approved materials & providing and fixing in position 38 mm width Aluminium dividing strips, 1.5mm thick, inserted in position, confirm to design etc all complete as per specification & direction of EIC.
SUB TOTAL ANNEXURE-A
ADD : GST @ 18% (( IGST18%) or (CGST @ 9% +SGST@ 9%)), Whichever is applicable
Add CESS @ 1%
GRAND TOTAL
INSTRUCTION TO TENDERER
GOODS AND SERVICE TAX (GST)
Bidder should indicate GSTIN No. (Copy of GST registration to be enclosed) and PAN No. (copy of PAN to be enclosed).
Tender will be considered/ accepted, if & only if the vendor has a valid GST Registration No.
Central Tax/ State Tax/ Integrated Tax/ Union Territory tax to be quoted as per GST Law.
Bidders to ensure correct applicability of Central Tax/ State Tax/ Integrated Tax/ Union Territory tax based on the Inter / Intra state movement Supply of goods and provision services or both.
Bidder shall mention the SAC Code/HSN Code for goods and services in accordance with GST law in their Bid and subsequently in their tax invoice. HAL, Koraput Division shall not be responsible for any error in SAC Code/HSN Code for goods and/or services specified by supplier/contractor.
The Tax Invoice for supply of Goods & Services should be raised as per the provision of GST Act & Rules and must compulsorily mention the following.
a. HAL, Korpaut Division GST registration number as 21AAACH3641R1ZJ
b. Name & address of supplier / Vendor/ Contractors
c. GSTIN of Supplier / vendors / Contractors
d. Consecutive Serial Number & date of issue
e. Description of goods or services
f. Total value of supply
g. Taxable value of supply
h. Tax Rate – Central Tax & State Tax or Integrated Tax, Cess
i. Amount of Tax charged
j. Place of supply
k. Address of delivery if different from place of supply
l. Signature of authorized signatory
Reimbursement of GST to the vendor is contingent upon complying with the following condition by the service provider.
i. Uploading the (invoices raised on HAL, KoraputDivision ) onward GST Return (GSTR-1) in GSTN Network portal within the statutory time period.
ii. Discharging the GST tax liability to the Government.
iii. Submission of Tax Invoice to HAL, Korpaut Division.
iv. Submission of proof of payment of GST to HAL, Korpaut Division.
v. Receipt of goods / services by HAL Koraput Division.
vi. Availment of Input Tax Credit by HAL, Korpaut Division .
In case GST credit is delayed/ denied to HAL, Korpaut Division, due to non/delayed receipt of goods and/or services and/or tax invoice or expiry of timeline prescribed in GST Law for availing such ITC, or any other reason not attributable to HAL, Korpaut Division, GST amount shall be recoverable from Vendor along with interest & penalty levied/ leviable on HAL, Korpaut Division, as the case may be.
In case vendor delays declaring such invoice in his return and GST credit availed by HAL, Korpaut Division is denied or reversed subsequently as per GST law, GST amount paid by HAL, Korpaut Division towards such ITC reversal as per GST law shall be recoverable from vendor/contractor along with interest & penalty levied/ leviable on HAL, Korpaut Division.
In case of discrepancy in the data uploaded by supplier in the GSTN portal or in case of any incomplete work/service, then HAL, Korpaut Division will not be able to avail the tax credit and will notify the supplier of the same. Supplier has to rectify the data discrepancy in the GSTN portal or issue credit note (details to be uploaded in GSTN portal).
For any such delay in availing of tax credit for reasons attributable to vendor (as mentioned above), interest as per the GST Act & Rules, along with penalty, if any will be deducted for the delayed period i.e. from the month of receipt till the month tax credit is availed, from the running bills.
Penalty amount so determined along with GST if applicable thereon shall be recovered from the contractor.
Any reduction in rate of Tax on any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensurate reduction in prices. Bidders have to submit declaration in their bid that they have complied with ‘Anti-profiteering clause’ under GST law.
The bidder’s quoted rates/ price should be after considering the Input Credit under GST law at their end, since GST on output (GST amount charged in Invoice) will be paid by HAL.
In case any changes in taxes and duties as per Gov. Notification (including GST), the same shall be applicable from time to time.
Quarters will be allotted to the awarded agency subject to availability & recommendation from the E-I-C/ O-I-C for which rents as applicable will be recovered from the running bills of the agency.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT02.pdf
TENDER_DOCUMENT • 1.71 MB
GCC-WORKS-NEW-ED-APRIL.pdf
TENDER_DOCUMENT • 0.43 MB
AM.pdf
TENDER_DOCUMENT • 5.21 MB
UNDERTAKING.pdf
TENDER_DOCUMENT • 0.01 MB
UPBOQ380.pdf
TENDER_DOCUMENT • 0.44 MB
380PBO.xlsm
TENDER_DOCUMENT • 0.03 MB
EPS.pdf
TENDER_DOCUMENT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .