Installation of Solar plate at Sub Division building Hansi-2

Amount

Supply instalaltion testing commissioning of solar photovoltaic grid connected roof top plant conforming to MNRE specifications as amended, consisting of Mono/Ploy Crystalline silicon solar cells, net matering facility, necessary protections, earthing mounted on Aluminium/GI structure of suitable strength with following components complete as required:- (a) Solar photovoltaic Module manufactured in india, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part 2. Solar photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/system must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 1 O years and 80% at the end of 25 years. (b) power conditioning Unit (PCU) of 350-800 V DC input voltage range and 400 V AC, three phase, 4 wire, 50Hz+/-2.5 Hz, output voltage suitable to generate AC (c) power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temprature from 0 to 50 degrees C. The PCU shall adjust the voltage and frequency level to suit grid frequency (d) Data monitioring system complete with accessories. (e) Fixing of Array junction box & main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as (f) Ligthning and surge voltage protection. (g) Connections and interconenctions by supplying and fixing required size XLPE insulaed copper conductor 1.1 Kv grade armored power and control cables between solar modules, main power cable to grid supply PCU along with supplying and fixing of necessary channel/conduit lugs and other accessories etc. as required @ HSR 32.70.