Conversion of rooms into Central Laundry System in the basement of Gymnasium at main campus Nauni, Solan (SH- Providing internal electrical installment).

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5sqmm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface / recessed PVC conduit and earthing the light point with 1.5 sqmm HRFRLS / PVC insulated single core copper conductor cable as required complete in all respect as per satisfaction of Engineer-in-charge (Group – C).

Wiring for power plug with 2x4 Sqmm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. 4 sqmm HRFRLS / PVC insulated single core copper conductor cable for earthing as required complete in all respect as per satisfaction of Engineer-in-charge.

Wiring for power plug with 4x4 Sqmm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No. 4 sqmm HRFRLS / PVC insulated single core copper conductor cable for earthing as required complete in all respect as per satisfaction of Engineer-in-charge.

Wiring for circuit /submain with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 NO. 1.5 Sqmm HRFRLS/PVC insulated single core copper conductor cable or same size for earthing as required complete in all respect as per satisfaction of Engineer-in-charge. a) 2x1.5 Sqmm

Wiring for circuit / sub-main with 4x16 Sqmm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No. 16 Sqmm (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect as per satisfaction of Engineer-in-charge.

Rewiring for light point/ fan point/exhaust fan/ call bell point with 1.5 Sq.mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible ) copper conductor cable in existing surface/ recessed steel/ PVC conduit and earthing the light point with 1.5 mm HRFRLS/ PVC insulated single core copper conductor cable including dismantling of existing wire as required (including switch and bakelite sheet etc.) complete in all respect as per satisfaction of Engineer-in-charge Group-A

Supplying & fixing metal box of 200x150x75mm deep (nominal size) on surface or in recess suitable for fixing phenolic laminated sheet cover in front including painting etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying & fixing following rating Piano-type switch / socket on the existing switch box / cover including connections etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

a) S.P. 5/6 amps one way switch, piano type.

b)S.P. 15/16 amps one way switch, porcelain base / piano type.

c) 5 pin 5/6 amps socket outlet, porcelain base / piano type.

d)6 pin 15/16 amps socket outlet, porcelain base / piano type.

Supplying and fixing five stepped socket type fan regulator on the existing board / box including making connections etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and fixing metal box of 180x100x60mm deep (nominal size) on surface / recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying & fixing bakelite batten / angle holder including connections etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work make of M.S. angle iron 50mm x 50mm x 6mm thick duly welded complete with 3mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation made from (50 mm x 50 mm x 6 mm thick) M.S. angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement with sufficient No. vertical and horizontal intermediate switchgear supporting members each of M.S. flat 50mmx6mm thick of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. legs of 50mmx50mmx6mm thick M.S. angle iron each 60 cm long including, powder coated painting and bonding to the existing earth etc., the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form complete in all respect as per satisfaction of Engineer-in-charge. a). 300mm deep (Nominal).

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17mm), in the existing enclosure with all accessories including connections etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and fixing copper strip bus-bar suitable for 200 Amp. 415 volts capacity four nos. each of cross sectional area (25.4mm x 4.75mm) in the existing enclosure with all accessories including all connection etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and fixing copper strip bus-bars suitable for 400 Amp. 415 volts capacity 4 No. each of cross-sectional area (38.10mmx6.35mm), in the existing enclosure with all accessories including connections etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Providing and fixing following rating and breaking capacity MCCB four pole in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

a). 100 Amp. – 16 KA

b). 200 Amp. – 16 KA

c). 315/400 Amp. – 50 KA

Supplying & erection of 6 amps. to 32 amps. rating, 10KA breaking capacity, 240 volts, ‘C’ curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required complete in all respect as per satisfaction of Engineer-in-charge. a) Single pole. Category – A

Supplying and erection of 40/50/63 amps rating, 10KA breaking capacity, 240 volts, ‘C’ curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required complete in all respect as per satisfaction of Engineer-in-charge.a).Double pole. Cat. A.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respect as per satisfaction of Engineer-in-charge. a) 100 Amps. Cat-A.

Supplying and fixing following rating, four pole (single phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 millampers in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respect as per satisfaction of Engineer-in-charge. a) 100 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus-bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete in all respect as per satisfaction of Engineer-in-charge. a) Single door-12 way.

Supplying and fixing of following way triple pole and neutral sheet steel MCB distribution board, 415 volts, on surface / recess, with provision for 4-pole MCB / isolator / RCCB / RCBO as incomer and SP MCBs as outgoing, complete with tinned copper bus-bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete in all respect as per satisfaction of Engineer-in-charge. a) Single door-8 way (8+24), horizontal type.

Earthing with copper earth plate 600mm x 600mm x 3mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and water pipe etc. (but without charcoal or coke and salt) complete as required complete in all respect as per satisfaction of Engineer-in-charge.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required complete in all respect as per satisfaction of Engineer-in-charge.

Supplying and laying 8 SWG copper wire at 0.50 Rmt. below ground level for earth electrode conductor, including soldering etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Providing and fixing 25mmx5mm copper strip on surface or in recess for earth connections etc. as required complete in all respect as per satisfaction of Engineer-in-charge.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured / XLPE power cable, working voltage 1100 volts grade direct in ground to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size complete in all respect as per satisfaction of Engineer-in-charge (Havells / Gloster / Grandlay / Plaza make). a)Armoured cable 300 Sqmm (3.5 core).

Providing, Installation, testing & commissioning of ceiling fan without electronic regulator, including wiring the down rods of standard length (upto 30 cm) with 16/0.20mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required complete in all respect as per satisfaction of Engineer-in-charge. a) Ceiling fan 1200mm sweep, cat–A.

Providing & installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete in all respect as per satisfaction of Engineer-in-charge. a)Exhaust fan, Light duty (Domestic), 300mm sweep.

Supplying and erection of street light bracket made of GI pipe ‘A’ class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt and nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respect as per satisfaction of Engineer-in-charge. a). 32mm dia. G.I. pipe, heavy duty.

Supplying and erection of Baton integrated LED channel integral sleek extruded polycarbonate LED channel with white acrylic cover of 20MCCT-BTW / PBTM08204 / BCLSB 20 WH including making all necessary connection etc. as required complete in all respect as per satisfaction of Engineer-in-charge (Bajaj/ Panasonic/ Great white make).

Supplying & erection of Edge series of LED street light fitting with bulb / PSTM16458 / STLERKT-451452 (BRTFG 45w LED) with pressure die cast aluminium housing LED street light luminaries with IP66 protection and making the necessary connections etc. as required complete in all respect as per satisfaction of Engineer-in-charge (Bajaj/ Panasonic / Great white make).

Providing and fixing digital Ammeter, CTs, three phase indicating lamp, digital voltmeter and fuse as required in the existing panel including making necessary connection etc. complete in all respect as per satisfaction of Engineer-in-Charge.

SHARMA LIGHT HOUSE