39/W/EDC-I/SRE2024-25

Amount

Detail of Work

Safely cartage of 25 KVA T/F from ESC, SRE to site of work including loading & unloading at both ends. (Dist.Up to 40 Km.)

Safely cartage of PCC poles 8.5 Mtr. long from ESC, SRE/JE store to site of work at various sites including loading & unloading at both ends. (Dist.Up to 40 Km.)

Safely cartage of STP poles 11 Mtr. long from ESC, SRE/JE store to site of work at various sites including loading & unloading at both ends. (Dist.Up to 40 Km.)

Safely Carriage of Fuse set from ESC SRE to site of work including loading and unloading at both ends

Safely Carriage of 11 KV Metering Cubical & 11 KV CT/PT Unit from ESC SRE to Site of work including loadign and unloading at both ends.

Safely cartage of other complete line material (Except PCC/ST Poles) from ESC, SRE/JE store to site of work at various sites including loading, unloading at both ends.( Dist.Up to 40 Km.)

Safely Installation of CT/PT Unit and connection properly.

Safely Installation of Metering cubical and connection properly.

Erection of single support on PCC/ST poles up to 8.5/11 Mtr Long with complete fitting of all accessories of 11 KV/LT line.as per RESSPO specification.

Safely Installation of Fuse Set and connection properly

Providing of MS nuts & bolts & washers off size

Laying, lifting, Stringing, sagging jumpring & binding of ACSR Weasel Conductor for 11KV/LT Line including complete.

Guarding work

Laying lifting and stringing proper sagging ABC cable of size 3x50 sq.mm including fixing of all type clamp and connector providing all accessories.

Grouting of STP 11 Mtr long with cement concreting in bolck of 600X600X1500 MM. in ratio 1:4:8 with cement, sand and brick ballast size 1''x1.5'' with plinth.

Earthing of Pole by earthing Rod

Laying of 11 KV XLPE cable 3x70 Sqmm

Making and fixing cable jointing kit size 3x70 sq.mm O/D & I/D Type.

Providing and fixing of All type clamp

Providing and fixing of Stone Pad

Providing and fixing of Holding Clamp

Providing and fixing of Stay Clamp

Providing and fixing of J-hook with clamp

Grouting and Fixing of stay rods by digging of pits in block 600x600x300 MM & cement concreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7/10 SWG and fitting the same on the pole including fixing of stay insulator in stay wire.

Fabrication and erection of double pole on 8.5 Mtr. long PCC Poles/11 Mtr Long STP Pole with complete fitting e.g channel bracings etc. including fitting of Disc/Pin insulators duly grouted with cement concreting in block of 450x450x1500mm.in ratio 1:4:8 with cement, sand and brick ballast size 1"x1.5". with plinth as per RESPO specifications

Safe installation of 25 KVA T/F on the D/p with complete fittings including making HT connections and commissioning.

Off Shooting of Tree Branches touching the above line

Laying of LT/XLPE cable 3.5x70 sq.mm as per respo specification.

FAGGU RAM & COMPANY