Upgradation /Design manufacturing, supply, installation, testing and commissioning of 2 Ton capacity chain pulley block outside the pump room along with allied works at LIS Gurah Banara Distt.Jammu

Amount

Upgradation /Design manufacturing, supply, installation, testing and commissioning of 2 Ton capacity chain pulley block outside the pump room along with allied works at LIS Gurah Banara Distt. Jammu

(A)Fabrication and installation of M.S. Staircase 16′x 2.5′ wide with working platform [2.5’x 2.5’] from 40mm dia. M.S Pipe for railing and 40×6mm M.S flat for working platform with MS angle iron 40x40x6mm & M.S channel 75x40mm. The staircase comprises of steps bearing size of 2.5′ with rise of 10 inches and tread of 10 inches of each step. The staircase should be properly fixed by way of complete welding of suitable nos. of M.S legs to be grouted in cement concrete along the side of bank of water source and required nos. M.S angle raised iron posts for proper clamping of railing on both sides with suitable nos. of M.S. angle iron and M.S. iron flat supports for M.S. stair case for its proper fixing. The job includes cost of material, labour charges and painting charges by applying one coat of red oxide and two coats of black enamel for its longevity and smooth finish. Job also includes all types of carriage charges of material and tools tackles to site and other associated charges for all materials during carriage/ loading and unloading etc at site (B)Earth work for Excavation of trenches 2 nos. of size (0.5mx0.5mx1m) at LIS Gurah Banara and removal excavated material and disposing of same at permissible dumping place. The job involves construction of RCC Concrete blocks 2Nos. of finish Size (0.5m x 0.5m x 0.5 m) adjacent to the suction pipes for anchoring of vertical square sections. Laying of crushed stones 40mm with one layer of 1:2:4 concrete mass, 4′ depth, providing and laying of mesh created out of M.S angle (40 x 40 x 6 mm) throughout the blocks after laying of 1:1.5:3 concrete mass to be done at site. Providing and fitting of suitable no. of vertical steel members for all blocks and cement concrete to be properly grouted in the blocks with complete plastering/finishing including engagement of labourers for complete job at site with transport charges for shifting of material at site including curing of 2 no. blocks. Complete Job (C)Fabrication of 2 Nos. 4m height vertical square section of size (0.25m x 0.25m) out of M.S angle of 40x40x6mm size at the base including erection of the square sections by providing/fitting of 4 no M.S Plates of size (1′x1′) at the top as well as bottom of the columns . The job involves shifting of fabricated square section from the workshop to the roadside near the station by engaging transport and then further shifting to the site of installation by head load. Erection of the 2 nos. Square sections by anchoring them in the RCC concrete. The job involves providing and fitting of Girder of specification (ISMB 150) measuring 18 feet and welding it on the top of two square sections by lifting and placing it on sections. Making of horizontal movement mechanism on the overhead gantry for its testing and commissioning. The job includes the cost of materials from various sources of locations of availability in the market, cost of hire charges against shuttering material, plastering / finishing, cutting, laying and binding of steel and M.S steel angles and channel of suitable size etc. ,labour charges for fabrication of structure for overhead gantry and welding set & Oxy-acetylene gas equipment, skilled /semiskilled labour charges at the site of installation including welding by using suitable electrodes of (8no.size).The job also includes providing/ fitting/ installation, testing and commissioning of 2 ton Gantry along with chain pulley block along with allied accessories at already installed Girder duly laid on vertical columns including loading and unloading and transport charges during carriage of other allied materials including chain pulley block at site with cost of complete installation charges etc at site. Complete Job (D)Providing/ fitting including replacement of damaged main switch 100 amps of standard quality along with laying anfd fitting of new P.V.C sheathed armoured aluminium cable 120mm2 3.5 core 20m of standard quality conforming to relevant I.S code from transformer to main switch and main switch to voltage stabilizer inside the pump room connected with aluminium thimbles of suitable size and current carrying capacity duly crimped and properly insulated by applying cotton tape and insulation tape.The job includes cost of material labour charges and all type of carriages involved , The hire charges of tool and tackles required for the job.Rebate on old parts to be provided by the executing agency on account of p/f of new parts/ components . (E)Providing laying and fitting of P.V.C sheathed cu cable 19/16 SWG 80m standard quality conforming to relevant I.S code damaged during HT fault of transformer and from L.T control panel to ATS to motor of unit no 1 and 2 by way of p/f of suitable no and size of Cu thimbles duly crimped with cu cable ends in suitable size P.V.C flexible pipe for the wire protection insulation tape roll cotton tape rools etc. Job includes cost of material and hire charges of material and tool and tackles required for the job. Labour charges for skilled and semi skilled albour at site during execution of job Rates tobeqouted after deducting the cost of old/damged materials on old parts to be provided by the executing agency on account of p/f of new parts/ components .

M/S UK MECH AND ELECT ENGG WORKS

M/s RK Elect. Mech. Engg and fabrication works

M/S K S ENGG WORKS