Construction of Kalaiyarangam Building at Kaveri Nagar Muthu Mariyamman Kovil Near in Muthukadu Panchayat.

Amount

Construction of Kalaiyarangam Building at Kaveri Nagar Muthu Mariyamman Kovil Near in Muthukadu Panchayat.

Earth work excavation and depositing on bank with initial lead and lift in hard stiff clay soil and hard gravel soil as per standard specification SS20 B for narrow foundation.

Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., complete.

Brick Work in Cement Mortor 1:5 mix using courntry bricks including cost and conveyance of all materials to site and all labour charges etc., complete

Centering for Sides and soffits including cost and conveyance and all labour charges etc., complete.BGL

Centering for Sides and soffits including cost and conveyance and all labour charges etc., complete. AGL

Reinforced Cement Concrete 1:1.5:3 mix for RCC using 20mm ISS BG metal including cost and conveyance of all materials to site including all labour charges for filling etc complete.

Supplying and fabrication of steel including cost and conveyance and all labour charges etc., complete.

Plastering Inside with cement mortor 1:5 mix 12mm thick including cost of conveyance of all materials to work site and all labour charges etc., complete

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm including cost and conveyance of all materials to site and all labour charges etc complete

Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete

Painting two coats with Exterior emulsion over one coat of primary coat including cleaning preparing the surface

Painting TWO coats of new iron works such as steel doors, windows etc, with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying with standard specification.

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 62

Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC light/ fan point (SD No.25)

Supply and fixing of single box type 4'-40W flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fitting of Tube Light [SD 83 ]

Wiring with 2x1.50sqm PVC insulated SC unsheathed conductor in suitable PVC rigid pipe on wall for plug point SD 36

Wiring with 2x1.50sqm PVC insulated SC unsheathed conductor in suitable PVC rigid pipe on wall for plug point SD 36

Supply and Delivery of Steel door 0.90m x 2.10 m

Supply and Delivery of Steel Window 0.90m x 1.2 m

Provision for Name Board & Photographic Charges etc

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

M. SIVAKUMAR (BID ID -1479197)

SURENDER MARIMUTHU (BID ID -1479276)