REPAIR TO STORM WATER DRAINAGE SYSTEM, FENCING, WALLS , FOOTPATH , HARDSTANDING, INCLUDING OTHER MISC B/R ITEMS AND DAY TO DAY CLEANING, REPAIRS TO SEWERAGE SYSTEM INCLUDING ALLIED ITEMS AT NCHC POWAI

Amount

Opening access door or cleaning eye of bends or junction of AC/CI pipe(soil/waste)at any position and at any height and cleaning by any means and flushing with clean water and refixing access door,all as specified and directed

Cleaning and desludging completely manhole or inspection chamber of any size up to 1.5 mtr depth including removal of sludge out side of MD land complete all as specifed and directed.

Cleaning and desludging completely manhole or inspection chamber of any size not exc 3.0 Mtr depth including removal of sludge out side of MD land complete all as specifed and directed.

Cleanning by any means SWG/CI sewage pipe line from inspection chamber to manhole or from man hole to manhole 150 mm dia pipe all including removal of sludge outside MD land as specified and directed

Cleanning by any means SWG/CI sewage pipe line from inspection chamber to manhole or from man hole to manhole 100 mm dia pipe all including removal of sludge outside MD land as specified and directed

Cleaning of gully trap/Nahani trap/Floor trap /inspection chamber of any size by any means including flushing by water complete all as specified and directed

Cleanning by any means SWG/CI sewage pipe line from inspection chamber to manhole or from man hole to manhole 250 mm dia pipe all including removal of sludge outside MD land as specified and directed

M&L for Cleaning and desilting of area strom water closed drainage/culvert of inner girth up to & including 450mm of any depth including removal of cover slab and refixing of cover in position and making good all as directed at site including removal of silt/waste materials outside MD Land complete all as specifed and directed.

M&L for Cleaning and desilting of area strom water closed drainage/culvert of inner girth above 450mm of any depth including removal of cover slab and refixing of cover in position and making good all as directed at site including removal of silt/waste materials outside MD Land complete all as specifed and directed.

Excavation in trenches n exc 1.5m wide and n.exc 1.5m depth for man holes and sewarlines etc n exc 10 sqm on plan and nexc 1.5m in depth and getting out for hard/dense soil complete all as specifed and directed.

M& L for PCC (1:5:10) type E2 with 40 mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed.

Demolition and breaking up 100mm drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar including bed concrete and removal of debris including sludge if any and side MD land complete.

All as per Item No 12 Here-in-before above but 150mm drain pipes.

M&L 100mm dia SGSW drain pipes laid in trenches and jointed all as specifed and directed

M&L 150mm dia SGSW drain pipes laid in trenches and jointed all as specifed and directed

M&L concrete bed to 100 mm dia pipes of cement mortar 1;3;6 type C-2 including packing under and haunching against the side of pipes after they are laid and tested complete all as specifed and directed.

M&L concrete bed to 150 mm dia pipes of cement mortar 1;3;6 type C-2 including packing under and haunching against the side of pipes after they are laid and tested complete all as specifed and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm in hard / dense soil complete all as specifed and directed.

Removing Excavated soils exceeding 1.5KM but not exceeding 5 KM and depositing where directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed

S&F TMT deformed bars 10 mm dia and cut to length, bent to shape requied including cranking, bending and binding with mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed

All as per above item No14 here-in-before but 6mm to 8mm dia quality confirming complete all as spd and directed.

M&L for Reinforced cement concrete 1:2:4 type B-1 ( using 20 mm graded aggregate) as cover slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs, chajjas and in shelves and the like, all as specified and directed by Engr-in-Charge.

M&L for providing factory made RCC precast cement concrete grade M-30 cover slab of size 450mmx900mmx75mm thick size set in cement mortar 1:6 including reinforcement of 8mm dia deformed bars @150mm c/c both ways etc, complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar including quoins, arches, pillars etc and precast concrete articles and disposing off the rubbish materials ooutside MD land as specified and directed

Material & labour for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed

All as per item 26 above here-in-before but except Bricks.

M/L for brick work with sub-class 'B' bricks, straight, or curved on plan to any radius as in half brick thick wall in CM 1:4 complete all as specifed and directed

Taking down cement plaster of any description in any position including racking out joints making key scrubbing down with water etc. and removal of debris out side MD land complete all as specified and directed.

Material & labour rendering 15mm thick cement plaster (1:4) finished even and smooth without using extra cement on brick or concrete surfaces using water proofing compound @ 3% by weight of cement complete all as specified and directed (Note: Supply only water proofing compound will be measured and paid separetaly)

Supply only integral water proofing compound ISI marked

M&L for cement concrete type B-1, 1:2:4 ( 20mm graded aggregate ) as in surface channels and drains etc complete all as specified

M&L for walling of random rubble uncoursed well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

All as per above item No 33 here-in-before but except stones complete all as specified and directed.

S & F PVC (SWR) pipe 110 mm bore single socketed in any length with rubble ring joints as in weep holes all as directed by Engr -in-Charge.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed. Note-Hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc 40mm complete as specified and directed.

M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 all as specified and directed.

M&L broken glass coping on top of walls in cement mortar 1:3 complete all as specified and directed.

M&L for providing plain cement concrete 1:2:4 type B-1using 20mm graded stone aggregate as in kerb stone /coping including framed work for man holes etc including weathering ,slightly rounded or chamfered angle and throating as directed including necessary form work complete all as specifed and directed

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint complete all as specified

Demolition of concrete in ground floors (un re-inforced) and paving n.exc. 15 cm thickness (below or above ground level).

M &L PCC 1:3:6 type C2 75mm thick as in plinth protection/hard standing finished even and smooth using extra cement compete all as specified.

M&L PCC 1:4:8 C-2 (using 40mm graded crushed stone aggregate) as in sub base ( 75mm thick ) finished even and fair all as specified.

M&L 100 mm thick cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as in hardstanding, path etc incl finishing cement concrete surface even and smooth without using extra cement complete all as spd and directed.

Forming contraction joints 100mm deep X 10mm wide , filled with sealing compound Grade A '

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Hard/dense soil, complete all as specified and directed.

M & L for hard core n.exc 63mm gauge of broken stone or boulders deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for chequered cement concrete tiles 25cmX25cmX22mm thick,set jointed in neat cement slurry in floors with grey cement and pigments and including over 20mm thick screed bed in CM 1:4 etc and as approved by Engr-in-charge.

M& L for 80mm thick Machine pressed precast paver block M-40 grade laid over sand cushioning after consolidation set and levelled the paver block on proper level with inter locking and size conforming to IS 15658-2006 with grey cement and pigment (LAQUER FINISH) etc complete all as specified and as directed Note: sand cushion will be measured separetely .Make - Super tiles/NITCO Tiles/VITCO tiles

Supply only sand cusion for paver blocks

Dismantling Asbestos cement/galvatume aluminium zinc ( corrugated semicorrugated, etc) sheets in roof coverings etc complete all as specified and directed.

S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering/clading to wall, fixed with self taping screws as specified.

S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering/clading to wall, fixed with self taping screws as specified.

S & F Steel work in joist,channel,angle,or tee sections, fixed independently, without connecting plates, etc. including tubular poles/purlin/rafter special shaped washer etc. complete using Fe 410-W(Gde-E-250 quality-A) complete as specified and directed.

M&L for preparation for two coats of synthetic enamel paint over on new steel /iron surfaces over one coat of red oxide primer complete all as specified.

Dismantling post or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good the disturbed ground complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed..

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/loose soil each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble in layers n.exc 25cn watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) of foundation for fixing tubular poles/trusses in columns, pillars etc complete all as specified.

S & F Mild steel work in hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and countersunk for blusters running bars for doors, balusters, nosing to steps including imbedding in concrete and screwing etc, wind ties for roof including securing bolts; posts and struts in fencing including cutting top to shape as directed, drilling holes, notching for wire; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc., and similar work conforming to Fe-290 Gde-165 complete all as specified and directed.

M&L for rolled mild steel Framed work as in doors or Gates of angle or other section quality confirming to Fe-410-W(Gde E-250 quality-A), complete all as specified and directed.

Supply only Chain link MS galvanised fencing 4mm dia, mesh size 100X100mm all as specified and directed.

Fixing only chain link fencing including line wires any mesh size any type to any type of standards rails straining bolts etc including privision of binding wire all as specified and directed.

M&L for mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and directed.

M&L for preparation for two coats of synthetic enamel paint over on new steel /iron surfaces over one coat of red oxide primer complete all as specified.

S & F galvanised 2 stand barbed wire with 2.24 mm dia barbed with 2 mm dia barbs @ 75 mm spacing and straining fixing to any type of standard rails MS angles complete all as specified.

Dismantling stone slabs and tiles of any description or thickness in kitchen platform and similar work laid, bedded and pointed in cement mortar and removal of rubbish/ demolished materials out of MD land complete all as specified and directed

M&L for 18-20mm thick granite (of any type) machine cut in skirting / dado laid over 15mm thick rendering in CM 1:4 and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and directed.

S R INFRASTRUCTURE

M/s Qureshi Construction Co

joshua construction

PANKAJ AND BROTHERS

A P ENTERPRISES