Construction Of Godown 800 MT And Processing Shed 503.88 Sq.MT.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up toa distance of 50m.beyond thebuilding area &stackingandspreadingasdirected,dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering Including shoring and strutting etc.complete.(LIFTUPTO1.5M.)ByMechanicalMeans (PWDS.S.R.22-23 Item Serial No.726 & Item No.21.02)

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Mean

Providing dry trap/ granite/ quartzite/ gneiss rubble stone soiling 15 cm to 20 cm thick including hand packing and compacting complete. Spec.No. : Bd.A.12 Page No. 264 ; (PWDS.S.R.22-23ItemSerialNo.757&Item No.21.38)

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layersincluding watering and compacting etc. complete. (PWD S.S.R. 22-23 Item Serial No.755 & Item No.21.36)

Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer in charge inlayersof15cmto20cmincludingwateringand compactionetc.complete.(PWDS.S.R.22-23Item Serial No.756 & Item No.21.37)

Providing and filling in the foundation with sand of approved quantity from out side by engineer in charge in layers of 15cm to 20cm including watering and compaction etc completed

ProvidingandlayingCastinsitu/ReadyMixcement concreteinM-10oftrap/granite/quartzite/gneissmetal forfoundationandbeddingincludingbailingoutwater, Steelcentering,formwork,laying/pumping,compacting, rougheningthemifspecialfinishistobeprovided,finishingifre quiredandcuringcomplete,withfully automaticmicroprocessorbasedPLCwithSCADA enable dreversible Drum Type mixer/ concrete Batch mix plant(Panmixer)etc.complete.Withfineaggregate (CrushedsandVSIGrade)(PWDS.S.R.22-23Item Serial No.732 & Item No.24.01)

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. 5-4-13

Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board. 5-3-18

Running Meter

ProvidingandlayingCastinsitu/ReadyMixcement concrete in M-20 of trap / granite/gneiss/ quartzite metal for R.C.C. fins of required thickness in positionas shown onthedrawingsorasdirectedbyEngineer-in-charge including steel centering, plywood / steel formwork, steel props,laying/pumping,compaction ,finishinguneven and honeycombedsurfacewithC.M.1:3ofsufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided andcuringetc.complete.(Excludingreinforcement, includingcoverblock)Newlylaidconcreteshallbecoveredby gunny bag, plastic,tarp aulinetc. withfully automaticmicroprocessorbasedPLCwithSCADAenable dreversible Drum Type mixer/ concrete Batchmix plant(Panmixer)etc.complete.Withfineaggregate(Crusheds andVSIGrade)(PWDS.S.R.22-23Item Serial No.874 & Item No.26.31)

Shed PEB Work

ProvidingandfixinginpositionTMT-FE-500bar reinforcement of various diameters for R.C.C. pile caps, footings,foundations,slabs,beamscolumns,canopies, staircase,newels,chajjas,lintelspardis,copings,fins, archesetc.asperdetaileddesigns,drawingsand schedules.includingcutting,bending,hookingthebars, bindingwithwiresortackweldingandsupportingas requiredcomplete.(PWDS.S.R.22-23ItemSerialNo.876 & Item No.26.33)

Providing dry rubble stone pitching 23cm (about 9) thick including all material, quarry spalls, labour etc.complete. (PWDS.S.R.22-23 ItemSerialNo.109 &Item No.2.34)

Providing Brick masonry in cement mortal 1.6 using second Class Burnt Bricks in foundation and plinth of inner walls/ in plinth of external wallsincluding bailing outwatermanually,strikingjointsonunexposedfaces ,wateringandscaffoldingcomplete Bd.G.1,Page No.313, (PWD S.S.R. 22-23 Item Serial No.894 & Item No.27.01)

ProvidingsecondclassBurntBrickmasonrywith conventional/I.S.typebricksincementmortar1:6in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. (PWD S.S.R. 22- 23 Item Serial No.897 & Item No.27.05)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including basecoatof15mmthickincementmortar1:4using waterproofing compoundat 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6to8mmthickincementmortar1:4finishing the surface bytakingoutgrainsandcuringforfourteendays scaffoldingetc.complete.(PWDS.S.R.22-23ItemSerial No.968 & Item No.32.11)

Providing and fixing steel ventilat or fully glazed partly fixed as per detailed drawing with hot dip zinc coating including fabricating glazing with plain/ obscured glass pans 5mm thick and approved type quality and iron oxidized fixtures and fastening with guards quare bars 12mm 10cmc /cand oil painting 2coats etc. complete. (PWD S.S.R. 22-23 Item Serial No.1228 & Item No. 39.30)

Providing and applying white-wash in one coat on old/ new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushingandbroomingdownetc.complete.(PWDS.S.R. 22- 23 Item Serial No.1102 & Item No. 36.02)

Providingandapplyingplasticemulsionpaintofapprovedqual ity,colourandshadetooldandnewsurfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete. (PWD S.S.R. 22-23 Item Serial No.1112 & Item No. 36.12)

Providing and fixing rolling shutter fabricated from steell at hsofminimum thickness 0.9mm with lock plate of 3.15 mm thickness reinforced with 35x35x5mm angle section fitted with sliding bolts and handles for both sides, deep M.S.channel section of depth and thickness not less than 65mmand3.15mmrespectivelywithholdfastarr angements, M.S.Bracket plate 300x300x3.15mm minimumsizeandshapewithsquare bar,suspension shaft ofminimum32mmdiameter,hoodcoverofM.S.sheet not lessthan0.9mm thicknessandofany sizeattopand safetydevicesincludingmechanicalgearoperation arrangement consisting of worm gear wheels and wormsofhighgradecastironormildsteelandonecoatof redleadprimeretc.complete.(I.S.62481979)(Without mechanicalgear)(PWDS.S.R.22-23ItemSerial No.1222 & Item No. 39.24)

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete.(PWD S.S.R. 22-23 Item Serial No.1022 & Item No. 33.30)

Providingstructuralsteelworkintrusses,othersimilar trussedpurlinsandmemberswithallbracing,gusset platesetc.asperdetaileddesignsanddrawingsoras directedincludingcutting,fabricating,hoisting,erecting fixinginposition,Makingriveted/bolted/welded connection and one coat ofanti corrosive paint and over it 2coatsofoilpaintingapprovedqualityandshadeetc. complete.(PWDS.S.R.22-23ItemSerialNo.824& Item No. 23.04)

Providing and fixing colour coated Zincalume (R) AZ 150 (min150 gms /sq.mt. total on each side) profiled sheets for roofing. The feed materialis manufactured out of nominal 0.45mm Base Metal Thickness (BMT) (0.5mm TCT), Hi- strength steel with min. 550 MP a yield strength, metallic hotdipcoatedwithAluminium-Zincalloy(55% aluminium 43.4% zinc 1.6% silicon) with COLOR BOND (R) steel quality super durablepolyester paint coat (within organic pigment). The paint shall have a total coating thickness of nominal 35um, comprising of nominal 25 um exteriorcoatontopsurfaceandnominal10umreverse coatonbacksurface.Profilesheetshall havenom. 950- 1050mm effectivecoverwidthandnominal25-30mm deepribswithsubtlesquareflutinginthefivepanatnominal 180-250 mm center-to-center. The endrib shall be designedforanti-capillarygroove.andreturnleg.The feedmaterialshouldhavecoilmanufacturersproduct details marked a regular interval. Including fasteners with min.fastenedwithmin.25umZinc- Tinalloycoated,Hexhead,self- drillingscrewetc.complete.(weightof profile 4.52Kilogram / SquareMetre ). (PWD S.S.R. 22- 23 Item Serial No.1179 & Item No. 38.34)

Turbo ventilator 24" MATERIAL RATES FOR SSR For Year 2022-23, Page no. 374, Building (Bd-R : Rofing and ceiling)

Providing and fixing UPVC Roof made up of 3 layers roofing material of thickness 2mm having width of 1130mm and of required Length having Tensile strength not less than 330Kilo gram/ cm2, including fastening with self drilling screw having washers made of stainless steel etc. complete. (PWD S.S.R. 22-23 Item Serial No.1182& Item No. 38.37)

RoyaltyChargesforsand

RoyaltyCharges forRubble and HM

M-10 Comp. Strength cube

M-20 Comp. Strength cube

M-25 Comp. Strength cube

Crush Metal - Basic test

Clearinggrass and removalofrubbish up toa distanceof50 metresoutsidetheperipheryofthearea.(PWDS.S.R.22-23 Item Serial No.85 & Item No.2.07)

Providing,laying,spreadingandcompactingstoneaggregatesofs pecificsizestowaterboundmacadamspecificationincludingspre adingin uniformthickness, hand packingtopropergradeandcamber,applyingandbrooming requisite type of screening/ binding Materials to fill up the intersticesofcoarseaggregate,wateringandcompacting withVibratoryroller.totherequireddensity.ByMechanical Means-GradingI(UsingScreeningTypeA(13.2)mm Aggregate)(PWDS.S.R.22-23ItemSerialNo.129&Item No.3.18)

Providing,laying,spreadingandcompactingstoneaggregatesofs pecificsizestowaterboundmacadamspecificationincludingspre adingin uniformthickness, hand packingtopropergradeandcamber,applyingandbrooming requisite type of screening/ binding Materials to fill up the intersticesofcoarseaggregate,wateringandcompacting with vibratory roller to the required density. By Mechanical Means-GradingII(UsingScreeningTypeB(11.2mm) Aggregate)(PWDS.S.R.22-23ItemSerialNo.131&Item No. 3.20)

Providingandconstructing75mm.thickModified PenetrationMacadam(MPM)road surfaceincludingall materials,preparingtheexistingroadsurface,spreading 40mm. stonemetallayers100%crusherbrokenmetal withconicalcrusherplantheatingandsprayingthe bitumenofspecifiedgrade@2Kilogram/SquareMetre, spreading12mm.sizechipscompactingwiththree wheelstaticrollerhavingweight8to10MT.to achive thedesireddegreeofcompactionasperTechnical SpecificationClause506etc.complete.(VG-30bulkbitumen ) (PWD S.S.R. 22-23 Item Serial No.146 & Item No.3.35a)

mailto:[email protected](mailto:[email protected]塹ᴻ䡿ⲯ嶂藄挧ꮥ)

9 MM SEAL COAT:Providingand layingof TypeA 9 mmpremixsealcoatwithHMPofSqmapropriatecapacitycrushe dstonechiping6.7mmsizeand penetrationbitumenof [email protected]/Sq.m, preparingexistingroadsurfacebymechanicalmeans, spreadingchipsandrolling,bystaticrollerhavingweight8 to10MTetc.complete.(VG-30bulkGrade60/70) (PWD S.S.R. 22-23 Item Serial No.161 & Item No.4.01)

Supplying hard murum/ kankar at the road site, including conveyingandstackingcomplete.(PWDS.S.R.22-23Item Serial No.103 & Item No.2.29a)

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete. (PWD S.S.R. 22-23 Item Serial No.105 & Item No.2.30)

Compacting the hard murum side widths including laying layers on each side with vibratory rollers including artificial watering etc

RoyaltyCharges

Supplying&erectingCRCAsheetmetaloneway enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. 5-4-13

Number

Processing Shed 503.88 Sq.MT.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m.beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering Including shoring and strutting etc. complete. (LIFT UPTO 1.5 M.) By Mechanical Means (PWD S.S.R. 22-23 Item Serial No.726 & Item No.21.02)

Excavation for foundation in Hard murum in cluding removing the excavated material upto adistance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means (PWD S.S.R. 22-23 Item Serial No.732 & Item No.21.08)

Providing dry trap/ granite/ quartzite/ gneiss rubble stone soiling 15 cm to 20 cm thick including hand packing and compacting complete. Spec.No. : Bd.A.12 Page No. 264 ; (PWD S.S.R. 22-23 Item Serial No.757 & Item No.21.38)

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layersincluding watering and compacting etc. complete. (PWD S.S.R. 22-23 Item Serial No.755 & Item No.21.36)

Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc.complete. (PWD S.S.R. 22-23 Item Serial No.756 & Item No.21.37)

Providing and filling i

n the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer) (PWD S.S.R. 22-23 Item Serial No.758 & Item No.21.39)

Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete ,with fully automatic microprocess or base dPLCwith SCADA enable dreversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc.complete. With fine aggregate (Crushed sand VSI Grade) (PWD S.S.R. 22-23 Item Serial No.732 & Item No.24.01)

Providing and laying in situ cement concrete of M-20 grade of trap / granite/quartzite/gneiss metal for R.C.C. work like raft, grillages, strips, foundations and footings of R.C.C.columns and steel stanchions including bailing-out water manually, including centering formwork of plywood / steel, compaction, covering newly laid concrete by gunny bag, plastic or tarpaulin, finishing the formed surface with cement morter 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc complete. (Excluding reinforcement) The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. (Wooden planks / shuttering will not be allowed) Spec.No.:Bd.F.2 Page No. 298 /IS 456 (1978) (PWD S.S.R. 22-23 Item Serial No.841 & Item No.25.11)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (PWD S.S.R. 22-23 Item Serial No.846 & Item No.25.31)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (PWD S.S.R. 22-23 Item Serial No.851 & Item No.25.50)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (PWD S.S.R. 22-23 Item Serial No.876 & Item No.26.33)

Providing Brick masonry in cement mortal 1.6 using second Class Burnt Bricks in foundation and plinth of inner walls/ in plinth of external walls including bailing out water manually, striking joints on unexposed faces ,watering and scaffolding complete Bd. G. 1, Page No.313, (PWD S.S.R. 22-23 Item Serial No.894 & Item No.27.01)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. (PWD S.S.R. 22-23 Item Serial No.897 & Item No.27.05)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (PWD S.S.R. 22-23 Item Serial No.968 & Item No.32.11)

Providing and fixing steel window of various sizes as per detailed drawing without hotdip zinc coating, with out ventilators, including fabricating/ glazing with plain/ obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars12 mm square at 10 cm c/c.) (PWD S.S.R. 22-23 Item Serial No.1218 & Item No.39.20)

Providing and applying white-wash in one coat on old/ new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. (PWD S.S.R. 22-23 Item Serial No.1102 & Item No. 36.02)

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary , and watering the surface for two days etc complete. (PWD S.S.R. 22-23 Item Serial No.1094 & Item No. 35.25)

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete.(PWD S.S.R. 22-23 Item Serial No.967 & Item No.32.08)

Providing neeru finish to plastered surfaces in all position s including scaffolding and curing etc. complete.(PWD S.S.R. 22-23 Item Serial No.971 & Item No.32.15)

Providing and applying primer coat for internal wall surfaces and ceilings including scaffolding etc. complete.(PWD S.S.R. 22-23 Item Serial No.1095 & Item No.35.21)

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. (PWD S.S.R. 22-23 Item Serial No.1111 & Item No.36.11)

Supplying and erecting Street light bracket made from 25 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC 2-7-1

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. (PWD S.S.R. 22-23 Item Serial No.1022 & Item No. 33.30)

Metric Tonne

Supplying, fabricating, erecting and fixing in position of steel structures at all elevations using fusion welding quality steel E-350 (Fe490) conforming to IS:2062 - 2006. Rate shall include cost of cutting, welding, splice

plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position welded/bolted Structural steelwork in columns, beams, trusses, purlins, platforms, ladders, monorails, staircases ,supports, strengthening of steel members etc. at site to line and level, supply of approved bolts/nuts/washers etc. complete as per drawings including painting as per G4/G5/G6 before erection and all materials and labour charges etc., complete and including Sand blasting & painted with 1 coats of enamel paint (Berger EPILUX SG – HHI 664002) of 35-50 micron each coat with air less spray gun over a coat of zinc chromate primer - 35-50 micron etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager. (The rate quoted shall include cost of bolts, nuts, washers, welding and electrodes required for the complete work). (Mecanical SSR 2022-23)

Supplying, fabricating and erecting of Cold Formed Light Gauge structural steel members conforming to IS:801/ IS:811 hot-dip galvanised to IS:4759 - 96 including cutting, welding or bolting, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position. (Mecanical SSR 2022-23)

Supply & Fixing of PPGI sheets of 0.5 mm thick as shown in drawing or as directed by engineer incharge with all necessary accessories.(Essar) Make) (Mecanical SSR 2022-23)

Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer in charge. (Mecanical SSR 2022-23)

Supplying, fabricating and erecting in position PPGI Eaves Gutter of required size with stop ends,all fixing accessories, drop ends, etc., at all elevations levels & heights including aligning, leveling, providing and fixing bolts, nuts, washers etc., conforming to latest specification including straightening, cutting, welding, bending to shape, bolting etc., complete and as directed as per engineer incharge (Mecanical SSR 2022-23)

Supply & Fixing of turbo ventilator with 610 mm throat, having base ring & top plate in stainless steel of 0.8 mm thick, rotated using twin bearings of SKF - 600122 & 600322 permanently lubricated & sealed. Fixed in FRP base plate of 2mm thk clear 1.020 mtr wide & 1.7 mtr long. (Mecanical SSR 2022-23)

Supply & Fixing of 2mm thk polycarbonate sheets as per drawing & as directed by engineer in-charge. (Mecanical SSR 2022-23)

Royalty Charges

Royalty Charges for sand

Royalty Charges for Rubble and HM

Gradation

Materials Testing Charges

Comp. Strength- Cube

Crush Metal-Basic Test

Comboned Flakiness & Elongation of single metal

Cement-Fineness,consistency.Setting time,Compressive strength,Specific Gravity

Sand-Fineness Modulus, Silt Content

Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks).

Concrete Mix Design (With all Tests on basic materials)

Murum In Plinth Plasticity Index

Compaction Test ( Proctor Density ).

RUBBLE Crushing Value/Compressive Strength, Water Absorption & Specific Gravity

STEEL -Tensile strength Yield stress, ultimate tensile stress. %elongation, weight per running meter,Bend/Rebend test. (Set of 3 Bars) UP to 16mm

SW - III Electrification Work

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 7-1-9

Making trench in soft soil having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of 1.1kV complete As per specification No. CW-EXN-CTR 16-1-1

Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables up to voltage level 1.1Kv cable complete as per specification No. CW-EXN-CTR 16-1-2

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 1-3-6

Supplying & erecting CRCA sheet metal enclosures of 1.2mm thickness with 10A, 2 pin plug & earth socket and 10A, 3 pin plug top with 10A single pole MCB having rated short - circuit breaking capacity (Icn) 10kA complete erected on angle iron / GI frame. 5-4-10

Point wiring for light/fan/bell in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW 1-7-3

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22 /E-27 base. 2-8-11

Supplying and erecting integrated LED street light fitting 18 to 22W IP65 & IK08 class having single piece pressure die-cast aluminium housing,having system lumens output of Min. 1800 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140- 270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/ FLS2. 2-4-1

Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC 2-7-2

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP 9-1-1

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP 9-1-4

Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 5-3-6

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 5-3-3

Supplying and erecting GI sheet 1.6 mm (16 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of r

ed lead paint and 2 coats of enamel paint. 6-1-6

Supplying and erecting marine (Waterproof) plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete with compliance to IS 720:2010 6-1-14

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/ 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no.SW-SWR/MCBDB1 5-4-15

Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE 7-6-1

Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE 7-6-2

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 7-6-10

Supplying & erecting single compression type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm for XLPE armoured cable as per specification No.CB-GL 7-7-2

Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box. 1-5-7

Point wiring for independent plug in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW 1-7-2

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WGPW/ CW 1-7-26

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 1-3-2

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 1-3-3

Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete. 1-6-8

Supplying, erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc.in provided distribution board. 5-3-14

Supplying & erecting 3W, 230V integral type LED Lamp suitable for B-22 / E- 27 base. 2-8-9

Supplying and erecting IP65 and IK08 rated UV shielded polycarbonate waterproof and dustproof industrial grade LED fitting (4 feet) max. 36W with high transitivity diffuser with system lumens output of min. 4300 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50 , IP20 rated, including driver with auto cutoff & auto restart feature at 325V with end caps on PVC lock/wooden board with 3 years warranty. 2-2-1

Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. FG-FN/CF 2-10-2

ESHS Compliance

Management Strategies and Implementation Plan (MSIP) to manage Environmental, Social , Health and Safety (ESHS) Risk and ESHS Code of Conduct