REPAIR MAINT TO FLOORING, BRICK WORK, WATER SUPPLY, ROOF, CEILING AT GE PANAGARH, MES INSTALLATION AND SHOPPING COMPLEX IN THE AREA OF AGE BR-I UNDER GE PANAGARH

Amount

Demolition of brick work built in cement mortar or stone masonary including all quoins, arches pillars etc and removing unserviceable material exc 100 mtr complete all as specified and directed.

M & L for fly ash brickwork with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

All as per item No 2.00 mentioned here-in-above but except bricks complete all as specified and directed.

M&L for brick work with flyash bricks straight or curved on plan to any radius in half bricks thick walls, built in cement mortar (1:4) complete all as specified and directed.

Demolition of RCC ( other then ground floor )piller, beams landing, chajjas slabs sleves & similar suspended work.and removing unserviceable material exc 100 mtr complete all as specified and directed.

M&L for reinforcement cement concrete (1:2:4) Type B-1 (using 20mm graded stone aggregate) for columns,chajja,slab pillars, piers, posts and struts complete all as specified and directed.

S&F TMT steel bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for reinforcement, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete as in reinforcement complete all as specified and directed.

All as per item No 7.00 mentioned here-in-above but 6mm to 8mm dia complete all as specified and directed.

Use and waste for formwork (rough finished surface of concrete, flat) to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and directed.

M&L for hardcore of broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for providing 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in sub base complete all as specified and directed.

M & L for providing 40 mm thick PCC (1:2:4) Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as specified and directed.

S&F 38 mm wide and 3 mm thick glass dividing strips as in flooring complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) in plinth protection and paving complete all as specified and directed.

M&L welded steel wire fabric supplied and fixed laid under floor weight per Sqm n exc 4 Kg /sqm complete all as specified and directed.

M&L for Cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in surface channels and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-0, (using 12.5 mm graded stone aggregate) as in laying of floor finishes and finishing even complete all as specified and directed.

M & L for polythene film, black 50 micron laid in floors complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

M & L for glazed ceramic tiles 300 x 200 mm x 7 mm thick in vertical surfaces such as risers, skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick cement plaster in cement mortar (1:4) on brick or concrete surfaces complete all as specified and directed.

M&L for coloured non skid ceramic tiles (joint free) 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured non skid ceramic tiles (joint free) 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting or dado, etc set and jointed in neat cement slurry and including 10mm thick rendering in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15 mm thick screed bed or bedding layer in mortar (1:6) complete all as specified and directed.

M & L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Material and labour for 25 mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry 0.3kg/Sqm over 20 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigments complete all as specified and directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster in cement mortar (1:6) on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 20 mm thick cement plaster in two coats (each coat 10 mm thick) on external surfaces of brick work in cement mortar (1:4) and second coat to be applied with WPC and recrone polyster fibre including fair finishing complete all as specified and directed.(WPC & Recron polyster fibre will be measured and paid separately).

Supply only liquid water proofing compound complete all as specified and directed.

M&L for rendering 5 mm thick cement plaster in cement mortar (1:3) on concrete surfaces as in ceiling, chhajja, shelves etc to match with existing surfaces including finishing even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall applying of two coats of cement base paint over a coat alkali resistant primer complete all as specified and directed.

M&L for preparation of new plastered surface of wall applying three coats white wash complete all as specified and directed.

M&L for preparation of new plastered surface of ceilling applying three coat white wash complete all as specified and directed.

Taking down chowkat or frame with shutters n.exe 1.50 sqm (without taking off shutter from frame) each complete all as specified and directed.

Taking down chowkat .exe 1.50 sqm and n exe 4 sqm (without taking off shutter from the frame) each complete all as specified and directed.

Refixing shutters of any description n exc 1 Sqm each in same opening complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

S&F factory made 35 mm thick 2nd H. W. plain framed panelled shutters (three panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per ISI 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing complete all as specified and directed.

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S & F steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in bed blocks for hold fast including necesssary formwork complete all as specified and directed.

S & F 100 mm size butt hinges extruded aluminium alloy with galavanised mild steel hing pin anodised and fixed type C21 complete all as specified and directed.

S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium handles, cast type, anodised 150mm long complete all as specified and directed.

S&F mild steel Butt hing medium weight cold rolled 100mm size complete all as specified and directed.

All as per item No 56.00 mentioned here-in-above but 50mm size complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F 2 nd class hard wood small fittings such as door and window stops and cleats including all necessary articles exceeding 200 cu cm and n. exc. 500 cu. cm each complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.50 sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass pin headed type and glazing with oil putty in square n.exc. 0.50 sqm each pane complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore complete all as specified and directed.

Fixing only in steel tubing and connection 15 mm dia bore complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed.

Fixing only in steel tubing and connection 20 mm dia bore complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and directed.

S&F in repair 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or but-ter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair grating square 150mm size of PTMT (minimum weight 100 gms) complete all as specified and directed.

S&F in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size (With brackets) complete all as specified and directed.

S&F in repair bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair vitreous china squatting pan of pattern 'Orrisa' size 580 x 440mm white with integral foot rests including connection to trap and to flushin pipe, antisyphonage pipe etc complete including making good to existing (floor / Tiles) complete all as specified and directed.

S&F in repair vitreous china wash basin white, flat back, size 550X400 mm including brackets and cutting for pinning in ends of brackets, complete all as specified and directed.

S&F in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.

Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S & F tubular towel rail brass chromium plated 20mm dia, 'D' type, 60cm long between flanges and including brackets complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc) of any thickness incl ridges hips valleys as in roof coverings complete all as specified and directed.

M&L for 6 mm thick asbestos cement corrugated or semi-corrugated sheets in roofs, walls, etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

All as per item No 84.00 mentioned here-in-above but except sheeting complete all as specified and directed.

M&L for asbestos cement two piece serrated ridge for corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked bolts complete all as specified and directed.

All as per item No 86.00 mentioned here-in-above but except ridge complete all as specified and directed.

Dismantling wrought Iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F wind ties for roof including securing bolts, flat iron fillets (for securing weather boarding with screw bolts and nuts) including all necessary drilling,bolting or riveting, etc and similar work conforming to Fe 410-0 or Fe 310-0 including painted with one soap coat of zinc chromate primer paint complete all as specified and directed. (including preparation of surface at contractor's workshop before fabrication)

All as per item No 89.00 mentioned here-in-above but fixing only complete all as specified and directed.

Dismantling of wall or ceilling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, of any thickness including cover fillets complete all as specified and directed.

M&L for 4 mm thick AC plain building boards, fixed to timber framework with screws in ceilling flat or sloping complete all as specified and directed.

M&L for Preparation of surface of ceilling board (new or old) applying three coat white wash complete all as specified and directed.

Dismantling timber fillets, rail, posts, rafters, purlins, etc under 40 sqcm in section (framed work) as in studs complete all as specified and directed.

M&L for 2nd class hard wood plain fillets, square, rectangular, or triangular in section clean sawn, secured with nails, cross sectional area exc 13 & n.exc 25 sq.cm in section complete all as specified and directed.

All as per item No 95.00 mentioned here-in–above but except fillets complete all as specified and directed.

All as per item No 95.00 mentioned here-in-above but cross sectional area exc 6 & n. exc 13 sq.cm complete all as specified and directed.

M&L for 2nd class hard wood wrought bull nosed splayed chamferred or rounded on one edge or face fixed with nails sectional area exc 3 & n.exc 6 sq.cm in section complete all as specified and directed.

Dismantling of timber scantlings 40 sq.cm and over in section, in any position complete all as specified and directed

M & L 2nd class hard wood as in scantling timber framed and fixed clean sawn complete all as specified and directed.

All as per item No 100.00 mentioned here-in-above but except material complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings complete all as specified and directed.

S&F 0.50 mm thick pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour as approved of 550 Mpa tensile strength as in roof covering / cladding to wall fixed with self tapping screws complete specified and directed complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick any colour having tensile strength of 550 Mpa as in ridges, hips valley gutter etc fixed with self tapping screws complete all as specified and directed.

S & F for anodised aluminium snap grid frame work size of grid 605x605mm for false ceiling complete all as specified and directed.

S & F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed.

M & L for providing and fixing Gypsum board 12m thick in ceiling fixed with screw as per manufacture instruction complete all as specified and directed.

Taking down shutters of any description exc 2 sqm each complete all as specified as directed.

S&F in repair steel rolling shutter,(1mm thick of laths) without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, ( Push pull or manual type) complete all as specified as directed.

Deduct the total amount of credit against Sch 'A' Rs (-) 45,477.00-(*) This amount is fixed and shall be deducted from the quoted amount of the bidder to arrive at contract sum.

S. D. Construction Co.

MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP

M/s sadhan kumar mukherjee

K L BAKSHI AND SONS