EXTERNAL AND INTERNAL PERIODICAL , REPAIRS AND REPLACEMENT TO JOINERY , SANITARY ITEMS , TILING SOIL WASTE PIPE, GI PIPE ETC,REPAIRS TO ROOF TREATMENT AND CONNECTED BUILDING WORKS AT DFRL MYSORE

Amount

Taking down cement plaster of any description, thickness including racking out joints hacking for key scrubbing down with water all as specified

M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces & finishing the surface even & rough complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar (1:6) including finishing the surface even and smooth complete all as specified and as directed .

M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces of Ceiling in cement mortar (1:3) including finishing the surface even and smooth complete all as specified and as directed .

S&F for chicken wire with mesh size 25mm from 0.9mm galvanized wire fixing/installed to damaged Celling, Brick walls and Chajjas etc in interior and exterior plastering complete all as specified and as directed.

M&L for dubbing out average 15mm thick Cement plaster (1:4) on irregular face of damaged walls and Celing surfaces complete all as specified.

Supply only Dr Fixit Pidiproof LW+ Roof Waterproofing (Mix 200 ml of LW+ with every 50 kg bag of cement.)

M&L for two coat of cement base paint of approved tint over New surfaces including preparation of surface all as specified

M&L for preparation of new palstered surface of wall and applying three coats of white wash on newly plastered surfaces of walls including preparation complete all as specified and directed.

M&L for preparation of new palstered surface of ceiling and applying three coats of white wash complete all as specified and directed .

Complete removal of existing treatment (White wash, colour wash, or any other treatment) of wall by brooming down on steel wire brushing scrapping down smoke soot moulds, moss and efflorescent salts and trading oil greasy spot etc complete all as specified and as directed.

M&L for applying 1.00 to 1.20mm thick Birla White wall putty or JK White wall Care Putty on walls for preparation of even and smooth surface at any location including filling the holes of nails and scratches preparation of surface complete all as specified and directed.

M&L for appying two coats of oil bound distemper of approved tint on walls surface (as per manufacturer instructions) on wall surfaces complete all as specified and directed

M&L for appying two coats of oil bound distemper of approved tint on ceiling surface (as per manufacturer instructions) on Ceiling surfaces complete all as specified and directed

M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down of lime scale, smoke soot, trading oil and greasy spots etc applying one coat of oil bound distemper of approved tint on old decorative surfaces of walls complete all as specified and directed.

M&L for preparation of old decorated surfaces of Ceiling by brooming down or steel wire brushing, scrapping down of lime scale, smoke soot, trading oil and greasy spots etc applying one coat of oil bound distemper of approved tint on old decorative surfaces of Ceiling complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down of lime scale, smoke soot, trading oil and greasy spots etc. upto 15m height and applying one coat of white wash on old decorative surfaces of walls complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down of lime scale, smoke soot, trading oil and greasy spots etc and applying one coat of white wash on old decorative surfaces of ceiling complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by grooming down or steel wire brushing, scrapping down of lime scale, smoke soot, trading oil and greasy spots etc. upto 15m height and applying one coat of cement base paint of approved tint on old painted surface on wall upto 15m height complete all as specified and directed.

M&L applying One coats of Exterior emulsion weather proof paint of approved tint on wall old surfaces including cornices, plasters etc by scrapping/down with wire brushes and washing down and removing existing loose finishes particles etc all as specified and directed (height Upto 20 Mtr including all necessary scaffolding)

M&L for prepartion of old painted wooden surfaces and applying one coat of synthetic enamel paint of approved tint any description not otherwise described over 10cm width or girth complete all as specified and directed

M&L for prepartion of old painted steel surfaces and applying one coat of synthetic enamel paint of approved tint of any description not otherwise described over 10cm width or girth complete all as specified and directed

M&L for prepartion of old painted steel surfaces and applying one coat of Alumi nium paint of any description not otherwise described over 10cm width or girth complete all as specified and directed

M&L for Preparation of Old concrete surfaces of any description over 10cm girth or width, not other wise described applying one coats of synthetic enamel of approved tint paint complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from steel frames.

S&F Sheet glass ordinary quality & glazing with oil putty in square not exceeding 0.5 Sqm in each pane 3mm thick Complete all as specified & directed.

S&F Sheet glass ordinary quality & glazing with oil putty in square exceeding 0.5 Sqm in each pane 3mm thick Complete all as specified & directed.

S&F 3mm thick figured glass pinheaded type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed .

Cuttings out old existings hinges any type from exisings steel windows/ ventilators and providings new box type steel hinges to fix the old windows/ventilators and making good complete all as specified and as directed.

Demolition of PCC in ground floor and paving n exe 15 cm thickness (below or above ground level) .

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust including Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

M&L for 25mm thick PCC type B-0, 1:2:4 (12.5mm graded stone aggregate) as in Cement concrete on roof surface as directed finished fair and even complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:3 on fair faces of concrete or brick surface mixed with water proofing compound as per manufacturers instruction finished even and smooth without using extra cement complete all as specified and directed. (Note: Water proofing compound not included in the quoted rate and will be measured separately)

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc; set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300mm x 450mm x 7 to 8 mm thick on vertical surfaces; set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile over and including 10 mm thick cement plaster in cement mortar 1:4 complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exc 1.50Sqm in each complete all as specified & directed

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed

S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification.

S&F 100mm size mild steel butt hinges medium weight cold rolled.

S&F 125mm long extruded aluminium alloy handle.

S&F 200mm long Anodised Aluminium tower bolt all as specified

S&F 20mm dia PVC Coated Curtain rod fancy type with brackets complete all as specified and directed.

Supply only PVC curtain Knobs fancy type fixed with sides of curtain rod complete all as specified and directed

Easing of door / window shutters of any size / any number of panels for easy closing /Opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.

Cleaning and removing all scales and dirt etc from tanks and form mouths of circulating pipes etc for 250 to 500 Ltrs capacity of tanks complete all as specified and directed.

Cleaning and removing all scales and dirt etc from tanks and form mouths of circulating pipes etc, capacity exceeding 500 litres but n.exc 1000 Ltrs complete all as specified and directed.

Taking up or down 15mm bore GI pipe and connections laid on roof, wall, ceiling etc. with due care including cleaning properly, for refixing or removal fromsite complete all as specified and directed.

Taking up or down 20mm bore GI pipe and connections laid on roof, wall, ceiling etc. with due care including cleaning properly, for refixing or removal fromsite complete all as specified and directed.

Supplying and laying of CPVC pipes outer diameter 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. complete all as specified.

Supplying and laying of CPVC pipes outer diameter 25mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. complete all as specified.

Provision of Brass Elbow fixing with CPVC pipes outer diameter 20mm complete all as specified and directed.

Provision of Brass Elbow fixing with CPVC pipes outer diameter 25mm complete all as specified and directed.

Provision of Female Brass Threaded Adaptor fixing with CPVC pipes outer diameter 20mm complete all as specified and directed.

Provision of Female Brass Threaded Adaptor fixing with CPVC pipes outer diameter 25mm complete all as specified and directed.

Provision of Brass Tee fixing with CPVC pipes outer diameter 20mm complete all as specified and directed.

S&F in repairs Bib tap standard of PTMT Bore dia of pipe in 15 mm any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed.

S&F in repairs Bib taps bore dia of pipe in 15 mm, CP brass with fancytype, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs Pillar taps, bore dia of pipe in 15 mm cast copper alloy, with fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F in repairs Stop valves, bore dia of pipe in 15 mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply only 32mm dia waste pipe of polythelene, flexible, for wash hand basin or kitchen sink complete all as specified and directed.

S&F CP grating 100mm dia round fixed on floor / nahani trap fixed with cement mortar complete all as specified and directed.

S&F in repair hand shower (health faucet) with 8 mm dia 1 mtr long flexible tube and wall hook chromium plated complete all as specified and directed.

S&F in repair vitreous china water closet “Orissa pattern” of size 580 x 440mm pan with 'P' or 'S' trap front or back inlet, foot rests including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed.

S&F in repairs 10 liter capacity PVC valve less syphonic action type, flushing cistern, low level with inlet ball valve etc, complete including 32mm dia flush pipe all as specified & directed.

S&F in repairs Wash basin size 550x400mm, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but including Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms)

S&F in repairs 125mm dia Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed .

S & F in repair of 600 mm x 450 X 4 mm thick looking mirror mounted on 3 mm thick PVC frame and fixed to wooden plugs with CP screws and washers complete all as specified and directed .

S&F in repairs overhead tank cover of PVC for 500 ltr tank complete all as specified and directed.

Taking down rain water pipes (any size or pattern) including all fittings bends etc complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes type 'B' single socketed, in any length with rubber ring joints, laid in trenches or in floors complete

S&F 110mm bore PVC (SWR) pipes type 'B' single socketed, in any length with rubber ring joints, laid in trenches or in floors complete

S&F 75mm bore PVC (SWR) type 'B' bends any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) type 'B' junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75mm bore PVC (SWR) couplers type 'B' complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends type 'B' any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) couplers type 'B' complete all as specified and directed.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

SCION ENTERPRISES

AMK ENTERPRISES

ARCHANA CONSTRUCTION CO

Lucky Enterprises

Radikan

Sri Lakshmi Engineering Works

SAPTHAGIRI CONSTRUCTIONS

ANAND REFRIGERATION

SRI AYYAPPA ENTERPRISES