Kalidas Marg sthit Aawas No. 12A me peechhe bane naale ki shatigrast RCC slab badalna, porch ki shatigrast floor tiles badalna, darwazon ki shatigrast machchar jaali badalna, lawn me PVC pipe daalna, aangan me lage darwazon par shade daalna, aawas ke

Demolishing R.C.C. work manualy by mechanical means including stacking of Steel bars and disposal of unseviceable matarial with 50 material within 50 metres lead as per direction of Engineer-in charge. DSR N0-15.3,

Dismantling Tile work in Floor and roof laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm. DSR.N0-15.23.1

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing cmplete with base of cement mortar 1: 4 (1cement : 4 coarse sand) DSR N0-11.26.1, (Rs-1585.19)

Providing and laying Vitrified floor Tile Size of 600x600 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved Make, in all colours & shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing with grey Cement Slurry @ 3.3 kg/Sqm including grouting the joint with white cement and matching Pigments etc. Complete.. (DSR-11.41.2)

Earth work in Surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan lncluding getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (All kinds of soil)( DSR.No-2.1.1,

Providing and laying in Position Cement Concrete of 1:5:10 (1 cement, 5 Coarse sand (Zone-lll) Derived from natural Sources : 10 graded Stone aggregate 40 mm nomical size Derived from natural Sources ) DSR N0-4.1.10,

Brick work with Common burnt clay F.P.S.(Non Modular ) bricks of Class- designation 7.5 in foundation and plinth in 1:4 Cement and Coarse sand of Mortar in including Supply of all materials labour T& etc required for proper completion of work as per DSR.No-6.1.1,

Dismantling Old Plaster or Skirting Racking out joint and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metars lead. DAR No-15.56,

15 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). DAR-13.5.1,

Centering and shuttring including strutting, Propping etc. and removal of from for suspended floors, roofs, landings, balconies and access platform. DSR-5.9.3,

Providing and laying in Position specified grade of reinforced Cement Concrete excluding the cost of centering, shuttering, finishing and reinforcement- all work Up to Plinth Level 1:2:4 (1 cement, 2 Coarse sand (Zone-lll) Derived from natural Sources : 4 graded Stone aggregate 20 mm nomical size Derived from natural Sources ) DSR N0-5.1-.3,

Steel reinforcement for R.C.C. work including Straightening, Cutting, Bending, Placing in position and binding all Complete upto Plinth Level. Themo-Mechanicaily Trated Bars of grade Fe-500D or more. DSR-5.22C.1,

Providing and fixing wire gauge shutter using galvanized M.S. wire guage of average width of aperture 1.4 mm in both directions with wire of dia 0.63, for doors, window and clerestory windows with hinges and necessary screws : 35, mm thick Shutter with ISI marked M.S. Pressed butt hinges bright finished of required Size Second class teak wood Jali Door . DSR No-9.27.1.1,

Supply and fixing of Stenless Steel Door And Window Fittings as Sliding Bolt, Tower Bolt, Handels etc. Complete as Direction of i/c.

Providing And Fixing Fly Proof galvanized M.S. wire gauge to windows and Clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. DSR No-9.51.1,

Structual Steel work riveted bolted or welded in built up section, trusses, Builds up gates, framed work lncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Sl.N0-10.2,

Providing Corrugated G.S. Sheet roofing including Vertical/ Curved Surface Fixed with polymer Coated J or L hooks, bolts and nuts 8 mm dia meter with bitumen and G.I. limpet washers filled with white Lead, including a Coat of approved Steel Primer and Two coats of approved Paint on Overlapping of Sheets Complete (UP to any Pitch in horizontal /Vertical or Curved Surface), excluding the Cost of Purlins, rafters and and trusses and including cutting to size and shape wherever required. (1.00 mm thick with Zinc Coating not less than 275 gm/m²) DSR N0-12.1.1,

Providing and fixing on Unplasticised Rigid PVC Pipes conforming to IS:13592 Type A, including Jointing with Seal ring conforming to IS:5382, Leaving 10mm Gap for thermal expansion, all fittings like two nos bend, one mo Coupler or any other accessories and P/F PVC pipe clips fixed by means of 50X50X50mm hard wood plug, Secrewed with MS Screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) Single Socketed pipes 160 mm dia meter.

Removing White or Colour wash by Scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete. DSR-13.88,

Providing and Applying white Cement based Putty of average thickness 1 mm. of approved brand and manufacture. Over the Plastered wall Surface to Prepare the Surface even and Smooth Complete. (DSR-13.80),

Finishing wall with Premium Acrylic Smooth exterior Paint with Silicone Additives of required Shade Old work. (Two or More Coats applied @1.43 ltr/10 sqm) Over Existing Cement Paint Surface. (DSR-13.112.1),

Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two of more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR.N0-13.62.1),

Polishing in high gloss/matt finish Melamine clear Polish on wood work in required colour/wooden shade texture with following process in the Sequence as detailed below. Melamine Polish on wood work (One or More Coat). DSR.N0-13.114),

French spirit Polishing One or more coats on old work. DSR-13.103.1,

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more. DAR-1.1.18,