Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹61.1 LAccepted-AOC | L1 | Accepted-AOC ACCEPTANCE | |
| 2 | L2₹63.7 L+₹2.5 L (4.00%)Rejected-Finance S NO 279 1 1A PLOT NO 113 KUTWAL COLONY SASTHE WASTI LOHEGAON PUNE 411 047 | PUNE | MAHARASHTRA | 411047 | L2 | Rejected-Finance L2 | |
| 3 | L3₹65.3 L+₹4.0 L (6.48%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹67.4 L+₹6.1 L (9.95%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹70.0 L+₹8.7 L (14.2%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹71.1 L
EMD Value
₹1.3 L
Closing Date
25 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL BHUPINDER SINGH CWE NAVY VASCO
CWE NAVY VASCO VASCO DA GAMA GOA 403802
REPAIRS AND REPLACEMENT OF CERTAIN BR AND EM ITEMS OF INHS JEEVANTI BUILDINGS UNDER GE GOMANTAK
2024_MES_647441_1
85767/E8
Open Tender
Civil Works
Item Rate
270 days
CWE NAVY VASCO
AS PER TENDER DOC
9 documents required · 9 mandatory
₹1,000
GE GOMANTAK
₹1.3 L
Yes
12 Jun 2024
21 Mar 2024
27 Apr 2024
21 Mar 2024
25 Apr 2024
11 Apr 2024
Amount
Taking down cement plaster on brick work or stone walls or roof slab including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Demolition of Brick work or stone/blocks/boulder masonary, builtin CM or cement lime mortar including all quoins, arches,pillars etc, but excluding ashlar facings, dressed stone work& precast concrete articles
Demolition of cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-charge
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard /dense soil all as specified and as directed
Excavation in trenches not exceeding 1.5 m width and not exc 1.5 in depth getting out soft disintegrated rock complete all as specified & directed by Engr-in-Charge.
M&L for PCC Cement concrete (1:4:8) type D2 as in foundations, filling and mass concrete all as specified and as directed.
M&L Hardcore broken stone or boulders of gauge exc. 63 mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to true surface
Returning, filling in , including, spreading, levelling, watering and well ramming in layers not exc 25cm thick soil/rock complete all as specified and directed
Removing excavated materials (soft/dis integrated rock/soil) to a distance n.exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed
M&L Pre cast cement concrete block masonary with solid blocks exc 10cm in width and setting in mortar CM 1:6 type C1 1:3:6 using 20mm graded aggregate
M&L PCC Type B-1 1: 2:4 (20mm graded aggregate) as in coping incl necessary formwork
M&L Pre cast cement concrete block masonary with solid blocks exc 10cm in width and setting in mortar CM 1:4 type C1 1:3:6 using 20mm graded aggregate
Supply and fixing PVC (SWR) pipes 75 mm dia 'single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed
Supply and fixing PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors
Supply and fixing PVC (SWR) pipes 110 mm dia 'single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed
Supply and fixing PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors
Material and labour for concrete bed to drain pipes (110 mm dia) in cement concrete 1:4:8 type D2 using 40mm graded crushed stone aggregates including packing under and haunching against the sides of pipes after they are laid and tested complete.
Supply and Fix PVC (SWR) bends of 110mm bore
S&F PVC (SWR) bends of 75 mm bore
M&L in repair PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement
M&L for 75mm dia PVC (SWR) multi floor trap, plain with CP grating including jointing with solvent cement
Material and labour for precast cement concrete slab for manhole covers slab 1:2:4 type B1 using 20 mm graded crushed stone aggregate set in CM 1:4
M&L for providing cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1.5 m clear span all as directed and specified by engr-in-charge.
Material and labour for precast cement concrete slab for manhole covers slab ,water troughs, shelves etc as in 1:2:4 type B1 using 20 mm graded crushed stone aggregate set in CM 1:6
Use & waste of Formwork to sides and soffits of lintels ,roof beams, beam haunchings, girders, bressummers, including supports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed
M&L for TMT bars, 5mm dia and over upto and including 10mm dia in stirrups ,cut to legnth bent to shape required including crancking bending spirally for hooping for columns, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips or by welding as in stirrups all as specified and directed by Engr in charge.
M&L for rendering in cement mortar 1 : 6 ,10 mm thickness on fair faces of brick/cement/stone surfaces and finishes the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering in cement mortar 1 : 4 (10+5)=15mm thickness on on other than fair faces of brick/cement/stone surfaces and finishes the surface even and smooth without using extra cement including mixing with liquid WPC on top 5mm thick only complete all as specified and as directed. Note :- Water proofing compound will be paid separately
Supply only liquid water proofing compound.
M&L for 3mm thick Birla white wall care putty on wall including preparation of new surfaces with necessary sand paper for applying two coats of distemper oil emlusion over a coat of alkali resistant primer complete all as specified and directed.
M&L for complete removal of existing treatment and applying 3mm thick Birla white wall care putty on wall and applying two coats of distemper oil emlusion over a coat of alkali resistant primer including preparation of old surfaces of wall complete all as specified and directed.
M & L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 as in ceiling surfaces complete all as specified and as directed.
M&L for providing three coats of white wash on new plastered ceiling surfaces including necessary preparation to surfaces complete all as specified and as directed.
M&L complete removal of existing treatment and providing three coats of of white wash on old plastered ceiling surfaces including necessary preparation to surfaces complete all as specified and as directed.
M&L for providing three coats of white wash on new plastered surfaces walls including necessary preparation to surfaces complete all as specified and as directed.
M&L complete removal of existing treatment and providing three coats of of white wash on old plastered ceiling surfaces including necessary preparation to surfaces complete all as specified and as directed.
M&L for Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as specified and directed by Engr-in-charge.
M&L for applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including necessary prepartion of old surfaces of wall and priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as specified and directed by Engr-in-charge.
Demolition of concrete (unreinforced) of any description complete all as specified and directed by engineer in charge.
Dismantling kitchen and bathroom floor, hearth or wall tiling including cement mortar bedding (including backing) and rubbish off the premises complete all as specified and as directed.
Dismantling stone slab and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar (including backing) and rubbish off the premises complete all as specified and as directed.
Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.
Material and labour for glazed ceramic coloured tiles of size 450X 350X 7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick backing layer in CM (1:3) complete all as specified and as directed.
M&L for vitrified ceramic tiles light shed 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm as in floors and skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement with pigment to match laid over and including 15 mm thick screed bed (1:4) in cement mortar complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including screed bed of 20 mm thick in CM 1:3 all as directed.
M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, etc laid over & including 10 mm thick backing coat (bedding layer) in CM 1:3,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finished complete.
M&L 100 mm thick PCC type C-2 (1:3:6) using 40 mm graded stone aggregate as in sub base all as specified and directed by engr-in-charge.
M&L for 25mm thick Cement concrete (1:2:4) type B0 (using 12.5mm graded aggregate) as in levelling course of slab all as specified and as directed by Engr - In - Charge.
M&L for granite (of any type) 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, skirting,window cills, cooking platforms, urinal partition and ward robe etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade complete laid over and including screed bed or bedding layer of mortar 15 mm thick in CM 1:3 for laying floor finishes all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) .exc 1.50 sqm but n exc 4 sqm each complete all as specified and as directed.
M&L for solid PVC frame (single, rebated) of size 60mmx30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100×8 sheet metal CSK screws complete all as specified and as shown on drawing (Note: Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold door properly for a long life
M&L for providing "RAJSHREE" brand factory made 25mm thick 100% solid WPC (wood polymer composite) coloured laminated flush door shutter of required size comprising of virgin PVC resin of K value 57.60(suspension grade) , calcium carbonate and natural fibers (wood powders/rice husk/wheat husk (non toxic additives, made from extrusion process WPC foam single extruded (inner) with having minimum density not less than 650 Kg/cbm manufactured y "RAJSHRI" an ISO 9001- 2015 Certified Company, having good screw holding capacity (Screw withdrawal strength of 2000 N ( Face) & 1100 N (Edge ), Minimum Compressive Strength of 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance of spread of flame of class A category with Property of being Termite / borer free water | moisture proof and fire Retardant WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shuttle and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw. All as per direction of Engineer in charge. Material test Certificate and authentication should be compulsory provided by the manufacturing company.
S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S&F for 40mm thick Flush shutters, solid core construction, with paticle board core and plywood face panels, both faces is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.
S&F for 25mm thick Flush shutters for ward robe, solid core construction, with paticle board core and plywood face panels, one faces is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.
M&L preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel over coat of pink primer
M&L for PCC type C1 1:3:6 (using 20 mm graded aggregate) for filling the holes of the hold fasts.
S& F MS flat iron 25 x 3 mm as in hold fast for fixing of chowkats.
S & F Butt hinges, 100 mm cast brass,with mild steel hinge pin, bright polished and fixed, type B-11
S & F 150 mm long brass handles, cast type polished bright
S&F 150 mm Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed
S&F 300 mm Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed
S&F 150mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed
S&F for 140 mm long floor door stopper of brass body and tongue, with hard drawn steel spring, fixed in floor
S & F powder coated (50 micron) door, window or ventilator shutter and frame any type (slidding or openable) with frame or other similar work etc section fabricated by using the JINDAL/ INDAL /HINDALCO /sections including necessary roller,wheel cleat handles locking arrangements also to receive 4.8mm thick glass with aluminum chanel beading and stainless steel screw including and rubber gasket beading etc complete (the weight of rubber gasket beading will not be measured with the weight of aluminum shuter glass will be measured and paid separately) complete all as specified and directed.
S&F Aluminum powder coated deco grill make DG 104 (10 mm thick section) with frame of section not less than 0.136 kg/rm complete all as specified and as directed.
S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and as directed.
S&F for Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples
S&F for vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) pedestal pan and trap including connection to drain and to flushing pipe ,antisyphonage pipe , plastic water closet seat,black ,closed pattern with flat bottom ,cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
S&F for PVC valveless, symphonic action type, flushing cistern, 10 liters, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or level, if any fixed in repairs including flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.
S&F for Stainless steel soap dish standard size heavy complete all as specified and as directed.
M&L for 100 mm dia PVC(SWR) floor trap, with plain grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.
S&F for 15mm bore brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.
S&F for vitreous china wash basin, white, ovel shaped back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed.
S&F for pillar taps, 15mm dia, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified and as directed.
S&F for concealed CP stop cock/angle cock 15mm dia, fancy type with capstone heads screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and as directed.
S&F bib taps, 15mm dia, cast copper alloy, fancy type, with capstone head, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and as directed.
S&F for Bib taps two way, 15mm dia, cast copper alloy, fancy type, with capstone head, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and as directed.
S&F for 125mm dia shower rose of brass chromium plated any colour for fixing with 15mm pipe complete all as specified and as directed.
S&F Shower arm 15mm size,195mm long with bend of 45degree with flange of CP brass any colour fixed in repair complete all as specified and as directed.
S&F for Towel Rail 600mm long of CP brass fixed with and including Chromium plated brass screws and wooden/plastic cleats .(Minimum weight 190gms) fixed in repair complete all as specified and as directed.
S&F for decorative curtain rod of 25mm dia complete all as specified and directed.
S&F for decorative brackets for curtain rod fixed in wall with SS screws complete all as specified and directed.
S&F PVC connections 15 mm size with PTMT nuts of length 600mm fixed in repair complete all as specified and as directed.
S&F for health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete make "Jaguar" complete all as specified
Taking down 20 mm steel tubing and connections, including cleaning for refixing or removal to store etc as directed.
Taking down 25 mm steel tubing and connections, including cleaning for refixing or removal to store etc as directed.
Supplying and laying of 16 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings concealed in walls/ceiling or laying in floors complete all as specified.
Supplying and laying of 16 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
Supplying and laying of 20 mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings concealed in walls/ceiling or laying in floors complete all as specified.
Supplying and laying of 20 mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
Supplying and laying of 25 mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
S&F 2000 Ltrs Rotational moulded polyethylene water storage tanks sintex (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed
S & F in 25 mm dia Gate valve with iron wheel head,screwed both ends for iron pipe and fixed
S&F in 25 mm diameter Ball brass valves high pressure with polythene float screwed for iron pipe or brass ferrule and fixed as specified.
S&F for sinks with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm
S&F 605x605 mm anodised aluminium snap grid frame work for false ceiling all as specified including hangers 6 mm dia. G.I. Wire (upto 1200mm to 2000 mm length) adjusting level fixed to roof with steel members as directed by engr-in-charge
Hangers 6 mm dia. G.I. (upto1200mm length) 1200mm length) adjusting level fixed to roof slabs by means ofceilling cleats made out of G.I.flat 40 x 3 mm size 60mm longand expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
M&L for 10 mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of aluminium /G.I./M.S as per specification and drawing but 1 mm printed PVC sheet used in lieu of plain PVC sheet as directed by engr-in-charge
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F for roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings, MS pipe for post and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc (Fe- 290 (Gde E- 165).
M&L for Painting with two coats of synthetic enamel paint over red oxide priming Surfaces of any description, over 10cm in width or girth,not otherwise described including preparation of surface
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement
S&F for 12mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required along with necessary articles, joining and locking accessories and complete fittings for door all as specified and directed.
Material and labour in replacement of point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall/ceiling and modular metal flush box, modular white cover plate with frame, blanking plate etc accessories etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.
All as per item No 106 above but for one light controlled by two switches.
All as per item No 106 but 2/3 pin socket out let 5 Amps with 1.5 Sqmm on same board.
All as per item No 106 above but for bell point.
All as per item No 106 but 2/3 pin socket out let 5 Amps with 1.5 Sqmm on independent board.
All as per item No 106 here-in-before but for 2 in 1 three pin socket outlet 15/25 Amps on independent board with 4 Sqmm cable FRLS copper conductor multistranded including 4 sqmm PVC insulated and unsheathed FRLS copper conductor cable as earth continuity wire all as specified and directed by Engr-in-Charge.
Supply & Fixing in replacement of modular switch 1 way 6A, 1 module, 230 volts.
Supply & Fixing in replacement of modular switch one way 16 Amps, 1 module, 230 volts.
Supply & Fixing in replacement of modular bell push 6 Amps, 1 module, 230 volts.
Supply & Fixing in replacement of modular socket 6 Amps-2/3 pin combined, 2 module.
Supply & Fixing in replacement of modular Switch two way 6 Amps, 230volts.
Supply & Fixing in replacement of modular socket 6A/16A-2/3 pin combined, 2 module.
Supply and fix in replacement of ceiling rose surfaces bakelite 65 x 50 mm three terminals including supply and fix PVC plate or square blocks.
Supply & Fixing in replacement of stepped type 2 module modular electronic fan regulator flush type including removal of old one.
Supply & fixing in replacement of call bell dingdong AC 230 Volts single pole.
Supply & fixing in replacement of MCB, 10 to 32 Amps, single pole, C Series, 10 KA, 240 volts.
Supply & fixing in replacement of MCB, 63 Amps, SPN , C Series, 10 KA, 240 volts.
Supply and fixing in replacement of MCB 63 Amps TPN, C Series, 10 KA, 415 volts.
Supply & Fixing in replacement of MCB protected socket of 20 Amps with sheet metal enclosure including plug top 20 Amps complete with one single pole 240V with 20 Amps MCB "C" curve including disconnecting and removal of old one any type. Make : Havells Cat Part No. DHDMCSN0251020 or equivalent in Legrand/C&S/Anchor
Supply & Fixing in replacement of sheet metal enclosure DB, 8way, SPN, double door factory made powder coated including neutral and earth link connector flush fixed in wall complete all as directed by Engr-in-Charge.
Supply & Fixing in replacement ofsheet metal enclosure DB, 8 way, TPN, double door factory made powder coated including neutral and earth link connector flush fixed in wall complete including dismantling of old one.
Supply & Fixing in replacement of submain wiring with 3 Runs (Phase, Neutral and Earth) of 4 Sqmm, PVC insulated, unsheathed, single core, multistranded, 1100 volts, FRLS copper conductor cable drawn in and including 25/32mm wide PVC conduit concealed with all accessories as required and connecting to existing main switch board/Distribution Board and testing on completion all as directed by Engineer-in-Charge.
Material and Labour in replacement of sub main wiring with single core 1100 V grade conforming to relevant IS, PVC insulated unsheathed cables two runs of 10 Sq mm multi stranded copper conductor drawn in and including suitable size of non metallic PVC conduit incl all accessories concealed in walls/roof/floors/ceiling etc with an earth wire of one run 10 sqmm copper wire earth continuity conductor connecting to existing main switch board \ Distribution Board and testing on completion etc including taking down old submain wiring of any type with conduit/cpaing casing and making good disturbed surfaces to match existing all as specified and directed. Note : Three runs of 10 sqmm cable and one run of PVC non metallic rigid conduit of suitable size shall be measured as one run.
Material and Labour in replacement of sub main wiring (three phase) with single core 1100 V grade conforming to relevant IS, PVC insulated unsheathed cables four run of 16 Sq mm multi stranded copper conductor drawn through and including 32mm mm wide non metallic PVC caping casing incl all accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 16 sqmm copper wire earth continuity conductor connecting to existing main switch board \ Distribution Board and testing on completion etc including taking down old submain wiring of any type with conduit/cpaing casing and making good disturbed surfaces to match existing all as specified and directed. Note : five runs of 16 sqmm cable and one run of PVC Caping casing 32mm width shall be measured as one run.
Supply and fixing in replacement of LED tube light fitting surface and wall mounted batten with 20 watts LED having minimum 100 lumens/watts and with integrated electronic driver complete made up of polycarbonate complete all as specified and directed.
Supply & Fixing in replacement of Recess mounting LED fittings 36 watts , suitable for 600 mm x 600 mm (2ftx2ft) modular/POP/Gypsum ceiling, luminaire with white powder coated CRCA housing with LEDs. seamless front frame with fat white high transmission acrylic cover 230V, complete in all respect & accessories internally prewired including connecting up with twin copper twisted flexible copper conductor cable with suitable size incl taking down old fitting of any type.
Supply and fixing in replacement of LED tube light fitting surface and wall mounted batten with 10 watts LED having minimum 100 lumens/watts and with integrated electronic driver complete made up of polycarbonate complete all as specified and directed.
Supply & fixing brushless direct current (BLDC) ceiling fan 1400mm sweep (ISI Marked), 230 volts, includung connection rod as per existing size of length of GI pipe medium grade including dismantling of old one and depositing in MES store yard as per specified and directed by Engr-in-Charge.
Supply & fixing exhaust fan (Metal body) 300mm sweep, heavy duty, 230 volts ,1400 RPM including louvers of suitable size and making hole size as per requirement , as per specified and directed by Engr-in-Charge.
Supply & fixing exhaust fan (Plastic body) 250mm sweep, heavy duty, 230 volts ,1400 RPM including louvers of suitable size and making hole size as per requirement , as per specified and directed by Engr-in-Charge.
S & F of LED Bldg Security Street light 35W ,IP 65 with suitable surge protection device including suitable size of GI pipe 1.2 m long bent to required shape,clamps,nut ,bolts and making electrical connection to the fitting with Suitable size of service wire.
M/L of for earthing complete with steel earth plate eletrode 60cm x 60cm x6mm thick buried dirctly in ground vertically (earth pit not less than 2.25 mtr below ground level) with top edge of plat not less than 1.5 mtr below ground level connected to GI wire 4mm dia by means of bolts. nuts,check nuts and washers etc including protection pipe 15mm dia up to 7.5m length , provision the earth lead to earth connection in ther main distribution box with lugs and GI nuts,bolts, earthing shall be done all as per shown electrical plate No 3 of SSR part 1 Including neccessary excavation in disintergratedand hard soil and 20mm dia GI pipe with funel for watering PCC earth chamber 100mm thick precast RCC cover with suitable precast RCC frame and earth test point and testing in presence of Engr -in -Charge.
S & F of earth continuity conductor of size 4 mm dia GI wire fixing through suitable size conduit fixing on wall complete all as directed.
Taking down Split type AC of any capacity and kept in safe custody/ deposit MES Store till the completion of Bldg Work and refixing the same after servicing complete all as specified.
Supply,Fixing & installed storage type water heater (Geyser) capacity 25 Ltrs(Vertical/horizontal as per site requirement) five star rating GMV type prefixing and grouting work for mounting nuts,bolts and washer etc in wall and reconnecting all inlet/outlet/vent pipees electrical/earthing connections and carrying out testing for proper functioning including dismantling of old geyser and deposited in MES store yard all as per directed and specified by Engr-in-charge.
Supply and laying of 50 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fitting in trenches complete all as specified & directed by Engr-in-Charge.
Supply and laying of 25 mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fitting in trenches complete all as specified & directed by Engr-in-Charge.
Supply and Fixing Gun metal Globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed in 25mm dia pipe Make
Cutting existing steel tubing for alterations or additions for any dia/size including inserting necessary fitting such as tee,elbow ,reducer in position including threading work complete all as directed by Engr-in-Charge.
Shree Ram Enterprises
Mehta and Co.
M/s VEEJEE ENTERPRISES
M/S G.N.POWAR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .