REPAIR/MAINT OF ELECTRICAL WIRING AND ALLIED WORKS AT OTM/MD ACCN AT ZONE -II AREA UNDER GE MCEME SECUNDERABAD

Amount

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / Hylam sheet/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and directed. Note: Taking down for existing surface point wiring including removal of conduit.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked of suitable dia, surface conduit wiring on walls including Tee, Junction boxes and provision of 2.0mm thick MS terminal boxes duly painted with red oxide metal primer and covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified & as directed for One light point controlled by one, one way switch 5 amps, SP complete all as specified and directed. Note: For the wiring made concealed, cutting and chasing will be measured and paid seperately.

All as per item No. 2 above but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and directed.

All as per item No. 2 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and directed.

All as per item No. 2 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and directed.

All as per item No. 2 above but for One light point controlled by two 2 - way switch 5 amps, SP complete all as specified and directed.

All as per item No. 2 above but for One Bell point controlled by one bell bush switch 5 amps, single pole complete all as specified and directed.

All as per item No. 2 above but using 4.0 Sqmm single core copper conductor cable multistranded PVC insulated unsheathed 1100 volts grade for 3 pin 15 Amps switch socket combination point including running 4.0 Sqmm copper conductor PVC wire as earth continuity conductor on independant board complete all as specified and directed.

S & F of Switch piano , single pole one way, flush type 5 Amps capacity 230 volts complete all as specified and directed.

S & F of Switch piano , single pole two way, flush type 5 Amps capacity 230 volts complete all as specified and directed.

Supply and fixing of bell push of 5 amps, single pole flush type complete all as specified and as directed.

Supply and fixing electric bell of 230 Volts AC single pole complete all as specified and as directed.

S & fixing of switch socket combination 2 in 1 multipurpose 2/3 pin 5 amps flush type complete all as specified and directed.

S & fixing switch socket combination 2 in 1 multipurpose 3pin 5/15 amps flush type complete all as specified and directed.

S & fixing of electronic ceiling fan regulator stepped type heavy duty suitable to work on 230 volts complete all as specified and directed.

S& fixing of lamp holder insulated body with black plate for angle/batten fittings fixed with wooden round blocks complete all as specified and directed.

S & fixing of ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed.

Supply and replace of capacitor 2.15 Mfd for ceiling fan complete all as specified and directed.

S&F sheet metal enclosure with 2 pole and Earth Metal Plug & Socket including 20A SP MCB complete including taking down unserviceable enclosure all as directed by Engr in Charge.

M & L Submain wiring on surface with 2 runs of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25 mm dia including one run of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified and as directed.Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured as one unit length. Note: For the concealed wiring made concealed, cutting and chasing will be measured and paid seperately.

S&F in repairs of PVC insulated unsheathed multistranded 1100 volts grade with copper conductor of size 1.5 Sqmm drawn through existing PVC conduit all as specified and as directed

S&F in repairs of PVC insulated unsheathed multistranded 1100 volts grade with copper conductor of size 2.5 Sqmm drawn through existing PVC conduit all as specified and as directed

Supply and fix in repair Flexible cord with copper conductor multistanded Twin core 23 / 0.198 size all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of andings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S & in replace of Vertical type TPN DB 4 way double door for incoming MCCB TPN 415 volts AC 3 phase 50 Hz 16 KA, 125 Amps made out of CRCA sheet housing with powder coating complete all as specified and directed. Note: MCCB will be measured and paid seperately.

Supply and replace MCCB 415V,16KA, 4 pole, 125 amps suitable for VTPN DB all as specified and directed.

Supply and replace MCB DB double door TPN 4 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface complete all as specified and directed.

Supply and fix in repair MCB TPN, 63 Amps, C curve, 415 volts complete all as specified and directed

Supply and fix in repair MCB TP, 63 Amps, C curve, 415 volts complete all as specified and directed

Supply and replace MCB double door DB SPN 8 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface complete all as specified and directed.

Supply and fix in repair MCB SPN 32 Amps C curve, 240 volts for fixing on MCB DB complete all as specified and directed.

Supply and fix in repair MCB SP 6 to 32 Amps C curve, 240 volts for fixing on MCB DB complete all as specified and directed.

S & F LED retrofit type polycarbonate lamp with integrated electronic drive of 18 Watt of 6500 K colour temp. complete all as specified and directed .

S & Fix LED batten / luminaire with polycarbonate housing and integrated electronic drive of 18/20 Watt of power factor >.95, 6500 K colour temperature working at single phase all as specified and directed .

S & Fix LED batten / luminaire with polycarbonate housing and integrated electronic drive of 9/10 Watt of power factor >.95, 6500 K colour temperature working at single phase all as specified and directed .

Supply and replace old unserviceable false ceiling fitting with ultra modern recess mounted 2'x2' LED luminaire 36 watts suitable for armstrong grid /POP ceiling of 2'x2' and complete with suitable aluminium frame for POP/Gypsum board 2x2 panel light,including electronic driver complete all as specified and directed.

Supply and replace old unserviceable light fitting with ultra modern surface mounted LED luminaire 36 watts 2'x2' panel light complete all as specified and directed.

S & F in repairs LED Bulk head fitting /Luminaire 10 watts with opal diffuser complete all as specified and directed

Supply and replace old unsv builiding security light of any capacity with energy saving LED building security light fittings of 25Watt capacity complete all as specified and directed.

Supply & Fix in repair Medium Grade G.I. pipe bracket 25 mm dia including clamp, bolts and nuts for fixing the building security light complete all as specified and directed.

Supply and replace LED electronic driver suitable for 36/42 Watts capacity 2X2 LED fitting all as specified and directed.

Supply and replace LED electronic driver suitable for 10/12/15 Watts capacity downlight fitting all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, checknuts and washers all as shown in Electrical Plate No.3 of SSR Part-I and connected to main switch board including excavation and earth work, PCC chamber in 1:3:6, RCC Cover in 1:2:4 type B-1 reinforced with 8 mm dia MS bars at 10 cm c/c, 20 mm dia medium grade GI pipe with funnel and wire mesh complete and watering arrangement including testing all as specified and directed. (Note: GI pipe 15mm dia, GI wire 4mm dia upto 7.5m deemed to be included in quoted rate.)

gsrinivasarao

G.MADAN MOHAN

SANTHAM TRADERS

BHEEMRAO PATIL CONTRACTOR

K LAKSHMAN SINGH AND CO