SPL REPAIRS TO ROOF, REWIRING AND LIGHTING OF APT BAY BLDG. No E-1 OF FDE

Amount

Dismantling Asbestos cement (corrugated semicorrugated) sheet in roof coverings all as specified and as directed.

Dismantling structural steel work including doors, gates,etc all as specified and as directed.

M & L pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of approved colour having tensile strength of 550 Mpa in roof covering / cladding to wall, fixed with self tapping screw all as specified and as directed.

M&L for Plain 1.00 mm thick galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified complete all as specified and as directed.

Running welding in repairs to the metal to be welded not exc 6.00 mm thick all as specified and as directed.

M & L pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutters, fixed with self tapping screw all as specified and as directed.

S&F False ceiling with approved PVC laminated designer Gypsum board (one side PVC lamination and other side aluminium foil paper) 600 X 600 X 8 to 9 mm thick, decorative type fixed in hot dipped galvanised steel modular snap grid work of size 605 x 605mm fixed with screws or nails etc grid consisting of main tee of size 24 x 32 mm at every 1200 mm c/c and cross tee of size 24x27 mm ( 1200 mm and 600 mm c/c) and wall angle of size 19 x 19 mm fixed to wall all as specified and G.I. Hangers 6 mm dia. (upto 2400mm length) adjusting level fixed to roof / roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete including dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs /blankets, any thickness, including cover fillets all as specified complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins here connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates quality conforming to Fe 410W(Gde-250) all as specified and as directed.

S&F for Bands, straps, supports or stays for rainwater, ventilating pipes including bolts, if required: hooks (stay) heavy for large gates hook and pintle hinges, large hasps and staples chains; hand made sliding bolts clamps, hold fasts, complete all as specified and as directed.

S&F 160 mm dia of UPVC(SWR) rain gutter including necessary fittings like connector to downward pipe ,beds, etc with all necessary fittings all as specified and as directed.

S&F 150 mm UPVC (SCH-40) pipes single socketed in any length with rubber ring joints fixed to walls incl taking down old pipes including bends and fittingsall as specified and as directed.

S&F in repairs PVC(SWR) bend/shoe for 100/110 mm dia complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in 1:4 including demolition of brick work of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work in CM 1:4 finished even and smooth with using WPC @3% by weight of cement without using extra cement complete all as specified and as directed. Note : WPC will be measured separately.

Supplying only Integral waterproofing compound

M&L for applying two coats of OBD over a coat of primer over two coats of cement base putty finish including preparing the new plastered wall surfaces complete all as specified and as directed.

M&L for complete removal of existing surfaces and applying two coats of oil bound distemper over a coat of alkali resisitant primer over and including two coats of cement based wall care putty complete all as specified and as directed.

M&L for preparation of new surfaces of walls etc, and applying two coats of acrylic emulsion paint over a coat of external primer over and including two coats of cement based wall care putty complete all as specified and as directed.

M&L for complete removal of existing treatment on walls by scraping, rubbing washing down etc, and applying two coats of acrylic emulsion paint over a coat of external primer over two coats of cement based wall care putty complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint all as specified and as directed.

M&L for 2 coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface of any description over 10 cm width and girth all as specified and as directed.

M&L for Anodised powder coated aluminium section for partition with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

M&L for 12 mm thick prelaminated particle board exterior grade prelaminated both side with decorative choice lamination & other side balancing white laminations all as specified and as directed.

M&L for 4 mm thick sheet glass ,ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding removing rubbish off the premises complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set & jointed in neat cement slurry & pointed in white/colour cement to match complete over and including 10mm thick in cement mortar 1:3 all as specified and as directed.

M&L for coloured Joint free Non-skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as a levelling course and 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 complete all as specified and as directed.

M&L for coloured Joint free Anti-skid rectified Ceramic tiles 7 to 8 mm thick in skirting/ dado laid set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 10mm thick in cement mortar 1:3 all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for all as specified and as directed.

M&L for 100mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) in flooring all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each complete all as specified and as directed.

S&F Windows/ ventilators (NCL ECO – 4000 Series Windows (Double Rebate Windows) or equivalent) fabricated from rolled framed sections made of galvanized steel colour coated/ powder coated (Base steel as per IS 513 “D” quality galvanized as per IS 277 with zinc coating of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm.Sections for Frame should be of 72mm x 55mm, Section for Mullion should be of 72mm x 50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12mm x 12mm, and Section for Fly Mesh should be of 40mm x 20mm Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter fixed Glass and one 100mm MS power coated tower bolt need to be provide for mesh shutter all as specified and as directed.

Note for item no 35.00:-Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter including SS Pivot Hinges – 1 set, Seccolor Handle & Seccolor Stay and 4mm Plain Float Glass and Stainless Steel 32 gauge Fly mesh of 25 holes per SqCM and powder coated Grill made of 10mm sq. MS Bars welded at 150mm c/c, 6mm x 12mm MS flat and fixed to window frame with screws complete all as specified and as directed. MAKE: NCL / Aswini &Sons or Equivalent approved make.

S&F Aluminium ( Die cast ) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed and all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed.

M & L for Anodised aluminium door shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. completeall as specified and as directed.

M & L for 1.25 mm thick manual type Steel rolling shutters, with out ball bearing,including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position complete all as specified and as directed.

S&F in repair of MS spring for rolling shutters complete all as specified and as directed.

M&L for cleaning of rolling shutter and applying grease on steel surfaces in side channels for smooth functioning of all steel members complete all as specified and as directed.

M&L for 60 mm thick Machine pressed precast conctete interlocking paver block M-35 Grade with grey cement and pigment any shape and size confirming to IS 15658-2006 over and including 50 mm thick sand, filling under floors including watering and consolidation by mechanical means complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in copings around the paver block for setting etc including weathering, slightly rounded or chamfered angles and throating and including necessary form work complete all as specified and as directed.

Taking down carefully existing point wiring of any description for (light, fan ,sockets bells etc) complete including fittings such as sunken boxes, switches, sockets, ceiling rose, lamp holders, brackets, fittings, pendants, fan regulartors etc and making good the disturbed surface of walls etc. all as specified and as directed.

Taking down unserviceable sub main wiring of any size two/four single core including earth wire and PVC conduit/ casing capping and removing materials from site and making good the disturbed surface of wall etc complete all as specified and as directed.

M&L Point wiring for one light point /bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type / Surface type on stone / brick, masonary walls, roof etc including new CI/MS sunken box of required size and all as directed by Engineer-in-Charge & 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. cutting/ running chases for concealed type, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified and as directed. (Make of FRLS copper conductor: Havells/KEI /Finolex) (Make of conduit: Anchor/Polycab/Modi) Note:- Cutting and chasing will be measured and paid seperately.

All as per item No. 46 above but for One Ceiling Fan / exhaust fan/ wall fan point controlled by one, one way switch and regulator all as specified and as directed.

All as per item No. 46 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board all as specified and as directed.

All as per item No. 46 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board all as specified and as directed.

All as per item No. 46 above but using 4.0 Sqmm single core copper conductor cable multistranded PVC insulated unsheathed 1100 volts grade for 3 pin 15 Amps switch socket combination point including running 4.00 Sqmm copper conductor PVC wire as earth continuity conductor on independant board all as specified and as directed.

Supply and fixing of Switch piano , single pole one way, flush type 5 Amps capacity 230 volts complete all as specified and as directed.

Supply and fixing of switch socket combination 2 in 1 multipurpose 2/3 pin 5 amps flush type complete all as specified and as directed.

Supply and fixing of socket outlet 2 in 1 multipurpose 2/3 pin 5 amps flush type all as specified and as directed.

Supply and fixing switch socket combination 2 in 1 multipurpose 3pin 5/15 amps flush type complete all as specified and as directed.

Supply and fixing of electronic ceiling fan regulator stepped 2M type heavy duty suitable to work on 230 volts complete all as specified and as directed.

Supply and fixing of ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed.

Material and labour for Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not less than 25 mm dia including one run of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board for surface/ concealed type on stone, brick masonary walls, roof etc. and making good the disturbed surface to match with the existing all as specified and as directed. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit will be measured as one unit length. Note:- Cutting and chasing will be measured and paid seperately.

Material and labour for Submain wiring with 2 runs of single core 4.00 sqmm PVC insulated unsheathed multistranded 1100 volts grade FRLS copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade of suitable size including one run of single core 4.00 sqmm PVC insulated unsheathed multistranded 1100 volts grade FRLS copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board for surface/ concealed type on stone, brick masonary walls, roof etc. and making good the disturbed surface to match with the existing all as specified and as directed. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured as one unit length. Note:- Cutting and chasing will be measured and paid seperately.

Material and labour for Submain wiring with 4 runs of single core 10 sqmm PVC insulated unsheathed multistranded 1100 volts grade FRLS copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade suitable dia including two run of single core 10 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board for surface/ concealed type on stone, brick masonary walls, roof etc. and making good the disturbed surface to match with the existing all as specified and as directed. Note:-Four runs of cable, two run of earth contuinity conductor and one run of conduit shall be measured as one unit length. Note:- Cutting and chasing will be measured and paid seperately.

S & F in repairs Vertical type MCCB TPN DB 4 way double door made out of CRCA sheet housing with powder coating complete all as specified and as directed. Note : Outgoint & incoming MCB/MCCB's will be measured and paid separately. MAKE: Havells/Schneider/Indo Asian

Supply and fix in repair MCCB 415V,16KA, 125 amps 4 pole suitable for TPN V type DB all as specified and as directed. Note : Outgoint & incoming MCB/MCCB's will be measured and paid separately. MAKE: Havells/Schneider/Indo Asian

Supply and fix in repairs MCB DB double door TPN 4 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface all as specified and as directed. Note : Outgoint & incoming MCB/MCCB's will be measured and paid separately. MAKE: Havells/Schneider/Indo Asian

Supply and fix in repairs MCB TPN, 63 Amps, 415 volts suitable for fixing on MCB DB complete all as specified and as directed. MAKE: Havells/Schneider/Indo Asian

Supply and fix in repairs MCB TP, 63 Amps, 415 volts suitable for fixing on MCB DB complete all as specified and as directed. MAKE: Havells/Schneider/Indo Asian

Supply and fix in repairs MCB double door DB SPN 8 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface all as specified and as directed. MAKE: Havells/Schneider/Indo Asian

Supply and replace MCB double door DB SPN 4 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface all as specified and as directed. MAKE: Havells/Schneider/Indo Asian

Supply and fix in repair MCB SPN 32 Amps 240 volts for fixing on MCB DBcomplete all as specified and as directed. MAKE: Havells/Schneider/Indo Asian

Supply and fix in repair MCB SP 6 to 40 Amps 240 volts for fixing on MCB DB complete all as specified and as directed. MAKE: Havells/Schneider/Indo Asian

Material and labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of andings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, checknuts and washers all as shown in Electrical Plate No.3 of SSR Part-I and connected to main switch board including excavation and earth work, PCC chamber in 1:3:6, RCC Cover in 1:2:4 type B-1 reinforced complete all as specified and as directed. Note: GI pipe 15mm dia, GI wire 4mm dia upto 7.5m deemed to be included in quoted rate.

Supply and replace old unserviceable false ceiling fitting with ultra modern recess mounted 42W LED luminaire suitable for armstrong grid /POP ceiling of 2'x2' and complete with suitable aluminium frame for POP/Gypsum board 2x2 panel light,including electronic driver all as specified and as directed. Make: Havells cat No. PLUTONEO2X2PLR42WLED840Sor equivalent in Wipro/Philips/ Bajaj / CG

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old light fitting all as specified and as directed. Make: Havells/Wipro/Philips/ Bajaj / CG

Supply and fix LED energy efficient security light fitting of capacity of 40 W including suitable dia GI pipe bracket , nuts, bolts clamps etc for fixing the light on wall all as specified and as directed. Make : Havells /Philips/Bajaj / CG / Wipro . NOTE : Quoted rate included the suitable GI pipe bracket,nuts and bolts.

Supply and fix sheet metal enclosure with double pole and Earth Metal Plug & Socket including 32 A SP MCB complete including taking down unserviceable enclosure all as specified and as directed. .

Supply and fix sheet metal enclosure with 3 pole and Earth Metal Plug & Socket including 63 A TP MCB complete including taking down unserviceable enclosure all as specified and as directed. .

Taking out defective parts of fan and rewinding of the ceiling/ exhaust fan of any size complete with equivalent new super enamelled copper wire as per existing gauge and weight as per manufacturer's design complete all as specified and as directed. NOTE: Cost of rewinding/capacitor/ clamps/rotar/ shaft or any connected items is deemed to be included in quoted rate.

Supply and lay 50 Sqmm , 3.5 core XLPE insulated armoured, heavy duty, electric cable with aluminium conductors 1100 volts ISI marked laid in trenches, floors, ducts, pipes drawn across the road/paths/drain/along poles/walls / floor equivalent etc including jointing & testing of size complete all as specified Make : NICCO/POLYCAB/UNIVERSAL/ GLOSTER / HAVELLS

Excavation in trenches not exceeding 1.5 mtr width and not exc 1.5 mtr in depth and getting out in hard /dense soil for laying /of cable / GI pipe complete all as specified.

Supply, spread river sand of approval in cable trenches providing for cable cushioning complete all as specified. NOTE :- Punned thickness of sand only will be measured and paid.

Removal of surplus soil to a distance not exc 50 mtrs away and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified.

Returning , filling incl spreading levelling watering and well ramming in layers not exc 25 cm thick complete all as specified.

Supply and lay PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40mm complete all as specified.

Supply and fixing from LT pole to MCCB DBs, the medium grade GI tubing of 50 mm dia for XLPE cable protection complete complete all as specified.

SAI RUPA CONSTRUCTIONS

G.CHANDRIAH AND SONS

PAVAN ENTERPRISES

Sri Associates

LAKSHMI ENGINEERS

M/S DIVIJA BUILDERS

STANDARD AGENCIES