Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-Finance | L1 | Accepted-Finance Accepted Being the lowest that is L1 and AOC will be issued soon | |
| 2 | L2₹14.7 L+₹7,765.32 (0.53%)Rejected-Finance ARKI DIVN HP PWD ARKI | L2 | Rejected-Finance Not accepted being L-2 | |
| 3 | L3₹16.0 L+₹1.3 L (9.19%)Rejected-Finance | L3 | Rejected-Finance Not accepted being L-3 | |
| 4 | L4₹16.3 L+₹1.6 L (11.2%)Rejected-Finance | L4 | Rejected-Finance Not accepted being L-4 | |
| 5 | L5₹16.9 L+₹2.3 L (15.6%)Rejected-Finance VILL MANOH P O BASSI TEH JOGINDER NAGAR DISTT MANDI H P | JOGINDER NAGAR | MANDI | HIMACHAL PRADESH | L5 | Rejected-Finance Not accepted being L-5 |
Tender Value
₹20 L
EMD Value
₹60,000
Closing Date
20 Feb 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DFO SHIMLA Rural
DFO SHIMLA Rural
Constuction of Forest Guard Hut, Forest U-201 Kufri, tutikandi beat shoghi block Mashobra Range under Shimla Forest Division
2023_FD_68930_1
06/2022-23
Open Tender
Civil Works - Buildings
Item Rate
420 days
U-201 kufri (Rajhana) Tutikandi beat
As per Tender Documents
8 documents required · 8 mandatory
₹500
Yes
Payable To DFO Shimla
₹60,000
Yes
1 Mar 2023
15 Feb 2023
21 Feb 2023
15 Feb 2023
20 Feb 2023
15 Feb 2023
15 Feb 2023 - 20 Feb 2023
Amount
Cutting in earth work and disposal of excavated earth upto a lead of 20mters in all kind of soil
Excavation in foundation, trenches etc., in earth work, lift upto 1.50m stacking the excavated soil not more than 3m clear form the edge of the excavation and then returning the stacking soil in 15cm layers, when reguired in to plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then deposing of all surplus excavated earth as directed with in a lead of 20m
Stone soling properly hand packed filling and consolidation with proper road roller to the required grade and camber i/c spreading watering and rolling of binding material murum & earth etc B above 100mm thick
Providing and laying cement 1:6:12 (1 Cement : 6 sand : 12 graded stone aggregate 40mm nominal size) and curring complete excluding cost of centring and shuttering in
Random rubble masonry / polygonal rubble masonary / polygonal rubble masonary (uncoursed / brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 Sand : 12 graded stone aggregate 20mm nominal size) at plinth level in
Providing form work of ordinary timber planking so as to give a rough finish including centring, shuttering strutting and propping etc. height of propping and centring below supporting floor to ceiling not exceding 4m and removal of the same for insitu reinforced concrete and plain concrete work in
P/L in R.C.C. work 1:2:4 (1 Cement 2 Sand 4 Stone balast 20mm nominal size i/c curring complete excluding cost of form work & reinfocement upto floor two level
Mild steel / tor steels rein-forcement for R.C.C. work i/c bending and binding placing and position complete upto floor two level
Brick masonry in cement mortar 1:6 in structure upto 3mtrs. Height from plinth level i/c/ curing complete
Half Brick Masonary in 1:4 (1 Cement 4 sand) cement mortar upto floor two level
Steel work welded in built up section trusses & framed work i/c cutting hoisting fixing in position and applying a priming court of red lead in beams joists channela angles tee flat with connecting plates oe angle cleats as in main and cross beams hip & jack rafter purlins connecting to common rafter
P/F Partical boord ceiling of approved quality with butt jointing & nails framed work & cover fillets to the measured & paid sepretely 8mm thick
P/f Wooden Moulded beading to door and window frames with iron screw plugs and priming coat on uneexposed surface etc compete
P/F 0.6 mm thick prepainted sheets fixed with G or L hooks 10mm dia G.I limpet & bitumen washers complete
Making and fixing of ridges or hips 60 cm sheets 0.6 mm fixed with G.I.J hooks 10mm dia G.I,. Limpet & bitumen woshers complete
Providing and fixing 15 cm wide 45 cm overall semicircular plain G.I. sheetgutter with ironbrackets 40x3mm size bolts and nuts and washers etc. including making necessary concetions with rain water pipe complete as per design. (Gutter)
Providing and fixing on wall face PVC d-Plast rain water pipes down pipe
P/F on wall faces PVC for rain water pipes i/c filling the joints accessries PVC plain bend PVC Plain Bend 110 mm dia
75 mm dia
Providing and fixing oxidized M.S. spring hinges necessary screws etc. 150mm
Providing and fixing M.S. pressed butt hings with necessay screws Door 100x58x1.90mm
Window 75x47x1.70mm
Cup Boord
Providing 40x3 mm flat iron hold fast 40cm long i/c fixing to frame with 10cm diameter bolts 7 nnuts and wooden plugs and embending in CC block 30x10x15 cm 1:3:6 (1 Cement 3 Sand 6 graded stone aggregate 20mm nominal size)
P/F 100mm bright finished brass floor door stopper with rubber cusion secrew etc.
Providing wood work in frames of doors windows clere shtory windows and other frams wrought, framed and fixed in position in 1st class deodar wood
Providing and fixing ply wood lining with butt joiniting and nails (frame work and cove fillets to be measured and paid for separately) 6mm
Providing & fixing 25 mm thick water proof commercial boord in shelves / box for cup board with butt joints & nains & fixed complete
Providing and fixing 25 mm thick water proof commercial board in shutters i/c carriage of materials
P/F Marble stone on kitchen shelf
Providing & fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / sued finshed with high hensity protective surface layer and reverse side of adesive side of bonding quality confirming too IS : 2046 Type S Including cost of adhesive of approved quality
Providing and fixing aluminium handles anodized transparent or dyed to requied colour Handle
Catcher
Providing and fixing of 4mm thick glazed shutter i/c glass for window and celerstorey windows using 4mm thick float glass pens. ISI Marked Ms Presswd Butt Hinges Bright Finished of Required Size with necessary secrews 2nd class teak wood
Preparation and fixing wire gauge shutter using galvanised with MS wire gauge of avcrage width of aperturre 1.4 mm thick in both direction with wire of dia 0.63 mm for doors & windows and clerestory window i/c bright finished / black enamelled iron hinged with necessary screws 2nd class teak wood
P/F M.S grills requiredpattren in wooden frame windows etc. with M.S. flats / square or round bars with round headed bolts and nuts or by screws i/c red oxide priming coat (with material) fixed to opening / wooden frames with rawl plugs screws etc.
Fixing anodied sliding dor bolt anodized transpoet or dyed to required colored and shade with bolts and nuts screws etc. competes 300x16mm small 250x16mm foe D 1 & 2 300x16
P/F M/s Tower bolt (barrel type) - do - D 300x10mm or W 250x100mm
P/F M/s handles -do- as per above item
Fixing of M.S. hooks and Eyes
P/F hydraulic door closer
15mm thick cement plaster in 1 : 5 in faire / rough side of brick walls for plastering upto floor two level i/c internal rounded angles, chmfers and or rounded not exceeding 10mm in girth and finished even and smooth i/c scaffolding
52mm thick cement concrete flooring with concreate hardber toping , underlayer 40 mm thick cement concrete 1 : 2 : 4 (1 Cement : 2 Coarse sand : 4 graded stone aggregatge0 20mm nominal size and top layer 12mm thick cement hardner consisting of mix 1:2 (1 Cement : 2 Graded stone aggregate 6mm nonimal size) by volume, hardning compound mixev @2ltr. per 50Kg. of cement or as per manufacturer's specefications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
Providing and laying spartic ceremic tiles 5.5mm thick in flooring (300 x 300mm size) treads of steps laid on a bed of 12mm thick cement mortar 1:3 (1 Cement : 3 Sand) finished with flush pointing in white cement. Detail of cost for one Sq. M
Providing and laying spartic ceremic tiles 5.5mm thick in flooring (300x300mm size) treads of steps laid on a bed of 12mm thick cement motar 1:3 (1 Cement : 3 Sand) finished with flush pointing in white cement. Detail of cost for one Sq.m
Making plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 coarse sand zone III : 6 graded stone aggregate 20mm nomial size) opver 75mm thick bed of dry brick blast 40mm nominal size well remmed and consolidated and grouted with fine sand including necessary excavation leveling and dressing and finishing the top smooth
Construction couser rubble hammer dressed U shaped open surface drain with side wall 15x22 cm in cement mortor 1:6 Plastering with cement mortor 1 : 3 including earth work and laying 10cm cement concrete in 1 : 5: 10 7 7.5cm cement concrete in 1 : 2 : 4 stone agrregate of 20mm nominal size and finished with a floating coat of neat cement complete as per standared designete
Applying prioming coat over new steel work and other metal surfaces afater and i/c prparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matters scoured with wire brushes, fine steel scrapers & sand paper complete with ready mixed priming paint brushing res lead red oxide / zine oxide chrome
Painting two coats (Excluding Priming Coat) on new steel and other metal surfaces with enamel paint brushing to give on even shade i/c cleaning the surface of all dirt, dust and other foreign matter
Applying primary coat over new wood and wood based surface after and i/c preparing the surface by throughly oil grease, dirt and other foreign matter sand papering 5 knotting (ready mixed paint brushing wood priming paint)
Painting two coats on new wood and wood based surfeces with enamel paint to give an even shade i/c cleaning the surface dirt dusr and other foreign matter and sand papering slopping
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and others foreign matters sand papered smooth to give final matter finish to the surface complete
Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface water thinable cement primer
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give on even shade over and including a priming caot with idstemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered sooth. Priming coat with distemper primer
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarliedon undecorated wall surfaces two coats to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter wtc. includng sand paper smoot complete
Providing to wall ceiling and floor galvanised mild steel tubes (medum grade) tube fittings (earth work in trenches to be measured and paid for sepatately) including carriage of maerials with in all leads and lifts 15mm (15mm) nomial bore:
Providing and fixing PVC water storage tank of ISI : 12701 marked, G.i. inletand outlet connection, 15mm nominal blre ball ale and mosaquto proof PVC cover wirth locking arrangement incliding hoisting upto a height of 10 mtrsabove ground level:- 1000 liters net capacity tank
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seasl ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) single sockted pipes . A) 100 mm (one hundreded and ten) nominal size:
Providng and laying in treches, galvanished mild steel tubes (light grade) tube fitings (earth work in trenches to be measured and paid separately) :- a) 15mm nominal bore
Providing and fixing PVC finolex plain bend ISI marked including fixing with approved ahesive etc. complete (1) 75 mm nominal size
Providing fixing water closet squatting pan (Indiantype W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level wihite PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixturescomplete, including cutting and making good the walls and floors wherever required white vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral tpefoot rests
Providing and fixing PVC floor trap (finolex) ISI marked of self cleaning design incliding fixing with approved adhesive cost of cutting and making good the wall and floors etc. complete
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting andbrackets, cutting and making good the walls wherever require: 550x440 mm flat back White Vitreous China Flat back wash basinsize 550 x 440mm with single 15mm C.P. brass pillar tap
Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40mm, including painting of fittingsand brackets, cutting and making good the wallswherever required: Kitchen sink with rain board 510x1040mm bowl depth 178
Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete 32mm dia
Supperiour glas (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washeres complete
Providng and fixing brass towel rail complete with CP brass brackets fixedto wooden plugs with CP brassscews including carriage ofmaterials with in all leads and liftsa) 600x20mm
Providing and fixing chromium plated brass soap dish with CP Brass brackets fixed to wooden cleats with CP brass screws
Providing and fixing CP brass long body bid cock of approved quality conforming to IS standards and weighing not less than 690 gms
providing and fixing CP brass pillar tap with capstan gead including carrigae of materials within all leads and lifts a) 15mm dia
providing and fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15mm nominal bore other missellanious fittings charges lum sum
Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : 1:5:10 (1 Cement : 5 coarse sand) : 10 graded stone aggregate 40mm nominal sze
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : Cement mortar 1:6 (1 Cement : 6 coarse sand0
Providing and laying in position cement concrete specified grade wexcluding the cost of centering and shuttering - All work upto plinth level:1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size) RCC Slab on septic tank
15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 Cement : 6 fine sand)
Providing and laying in position specified grade of reinforced cement concrete, cxcluding the cost of centering, shuttering, finishing and reinforcement -b All work upto plinth level 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
Centerring & Shuttering for the slab & I/c for the surface
Fixing of 75mm dia PVC pipes ISI marked inlet & outlet
P & F of high pressure PVC spigot and sockwest and ventilatting pipes ISI market including fixing with approved ahesive etc. 75mm dia
P/F of PVC Plain bend ISI marked i/c fixing with approved ahdessive etc, 75mm dia
DEVENDER KUMAR SHARMA
Harish Chandel
SANJEEV SHARMA
CHAMEL SINGH
BHUSHAN THAKUR
VINOD KUMAR
Parmod Kumar Thakur
Bhaw Singh Chauhan
Gaurav Sharma
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .