CO HP Private Education Institutions regulatory Commission and State Food Commission in Third floor P8 Plan Level 66.60M of Multistory Parking Complex Tutikandi Shimla-5 SH Providing E.I therein

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole. Cat-A.

Supplying and fixing Higher Rating (80 to 125A) 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

MCB DP 50/63 A 'C' curve

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way , Double door

12 way , Double door

Supplying and fixing of following ways surface/ recess mounting, 7 Segment 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, with provision to mount MCCB incomer, 4 module sub-incomer in each phase and SP MCBs as outgoing (but without MCB ’s and incomer), complete with tinned copper din-bar, wire-set, neutral link, earth bar, detachable gland plate, cable interconnections, including earthing etc. as required:- (Note: 7 Segment 415 volts, TPDB is normally used for 3 phase final distribution outlets are required.)

Double door-8 way (MCCB+12+24),7-segment

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Heavy duty, 300 mm sweep

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make

LED Batten Light 20W

LED Batten Light 10W

Providing and installation of following type of recess mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, including making cut in the ceiling to suit the size of the fitting, connections, testing etc. as required: of Approved Make

Square/round LED Panel Light 6/7W Recess

Square/round LED Panel Light 10/12W Recess

Square/round LED Panel Light 15W Recess

Square/round LED Panel Light 18/20W Recess

Square/round LED Panel Light 24W Recess

Square LED Panel Light 30W Recess

Square LED Panel Light 36W Recess

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 35 sq. mm (3.5 core)

Armoured cable 70 sq. mm (3.5 core)

Armoured cable 120 sq. mm (3.5 core)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing & fixing Module IO switch with plate and cat-6 connector with pvc box as required complete in all respects.

Supplying and fixing metal box for 8 module along with modular base and cover plate on surface/recess including providing and fixing 3Nos of S.P. 5 pin 5/6 amps modular socket outlet and one No 5/6 amps,modular type switch, connections, painting etc. as required. (Computer Point)

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 9" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-

10 Liter capacity water heater (Cat-A)

Providing and installation of Light duty, plastic body, ventilating fan of following sizes in the existing opening, by means of suitable rag-bolts/nuts, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete in all respects to the satisfaction of the Engineer-in-Charge:- Make: Havell's, Bajaj, Crompton Greaves, Usha, Kahitan etc.

Ventilating Fan, Light duty, (Plastic body) 250 mm sweep

Supplying ,installation,testing and commissioning of indoor ( single/door) cubical type Sub main panel.The panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables, ducting, switchgear intallation and properly supported compartmentalized bus-bars interconnection between bus-bars and switchgear with auxiliary bus-bars insulated conductors/strips etc. The panel shall be fabricated from 14G/16G CRCA sheets, base frame 75X40X3MM angle duly painted with primer and two coat of grey powder coated paintand,and should be complete with following switch gear and other accessories as detailed below

The panel should be cubical type,Indoor type, Single door, Floor mounted , fixed type, free standing single front, dust proof & compartmentalized Sub Panel made out of M.S. CRC Sheet 14G/16G, duly painted with Siemens Grey Powder Coated Paint As per Specification Approximate Size (H) 1000MM X (W) 850MM X (D) 300MM.

The panel should be compelete with providing & installation of 250A 4 Strip Aluminium Busbar (Horizontal/ Vertical) & Earth strip throughout the lenth of panel (current density of Aluminium Busbar shall not be lessthan 1.0AMP PER MM SQ.and Aluminium shall be Electric Grade E-91 , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black.

Assembling of Aluminium solid/ Copper flexible wire interconnection Busbar to C.O.S./MCCB & MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables.

Providing , connection , testing of Control Wiring with Copper flexible Wire (size of control wire shall be 2.5 sq. mm Copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc.

The cost of panel should be complete with Assembly charges of 250A 4 strips Busbar (horizontal/vertical & earth strip throughout the length of panel (current density of aluminium busbar shall not be less than 1.0 amps/ mmsq. .Aluminium shall be electric grade E-91E,busbar supports shall be DMC eposy insulator .All busbars links shall be covered /insulated with heat shrinkable sleeves of coloured coded Red,Yellow,Blue& Black.Approximate size of panel H-1000 X W-850X D-300mm.Assembly charges of aluminium copper solid /copper flexible wire interconnections in ACB/SWITCH & ACB/MCCB to field side for cable termination duly covered/insulated with heat shrinkable sleeves of coloured coded Red,Yellow,Blue& Black.All interconnections offields side are supported by conical L & Fingers type insulators of adequate size to support sustain the weight of cables .control wiring with copper flexible wire (size of control wire shall be 2.5 sqmm copper fexible for CT circuit & 1.0 sqmm for control & 1.0 sqmm for scada wiring) with thumbles printed sleeves,tie & belt etc.Assembly charges of accessories like gasket,doorlocks,copper flexible door earth legend plates etc. and shold be complete with all accessories as detailed above (23.01 to 23.05 )'The Switchgear & accessories, should be of Schneider, L&T, Siemens, ABB,HAVELLES make etc.

Supplying ,installation,testing and commissioning of indoor ( single/door) cubical type Sub/ main panel.The panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables, ducting, switchgear intallation and properly supported compartmentalized bus-bars interconnection between bus-bars and switchgear with auxiliary bus-bars insulated conductors/strips etc. The panel shall be fabricated from 14G/16G CRCA sheets, base frame 75X40X3MM angle duly painted with primer and two coat of grey powder coated paintand,and should be complete with following switch gear and other accessories as detailed below

The panel fabricted should be of cubical type,Indoor type, Single door, Floor mounted , fixed type, free standing single front, dust proof & compartmentalized Sub Panel Panel made out of M.S. CRC Sheet 14G16G, duly painted with Siemens Grey Powder Coated Paint As per Specification Approximate Size (H) 800MM X (W) 500MM X (D) 200MM.

Assembling of 150A/200 amp 4Strip Aluminium Busbar (Horizontal/ Vertical) & Earth strip throughout the lenth of panel (current density of Aluminium Busbar shall be 1mmx1mm=1.0 Amp.) Aluminium shall be Electric Grade E-91 , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black.

Assembling of Aluminium solid/ Copper flexible wire interconnection Busbar to MCCB & MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables.

Providing , installation ,& testing of Control Wiring with Copper flexible Wire (size of control wire shall be 2.5 sq. mm Copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc.

The cost of panel should be complete with Assembly charges of 200A 4 strips Busbar (horizontal/vertical & earth strip throughout the length of panel (current density of aluminium busbar shall not be less than 1.0 amps/ mmsq. .Aluminium shall be electric grade E-91E,busbar supports shall be DMC eposy insulator .All busbars links shall be covered /insulated with heat shrinkable sleeves of coloured coded Red,Yellow,Blue& Black.Approximate size of panel H-1000 X W-850X D-300mm.Assembly charges of aluminium copper solid /copper flexible wire interconnections in ACB/SWITCH & ACB/MCCB to field side for cable termination duly covered/insulated with heat shrinkable sleeves of coloured coded Red,Yellow,Blue& Black.All interconnections offields side are supported by conical L & Fingers type insulators of adequate size to support sustain the weight of cables .control wiring with copper flexible wire (size of control wire shall be 2.5 sqmm copper fexible for CT circuit & 1.0 sqmm for control & 1.0 sqmm for scada wiring) with thumbles printed sleeves,tie & belt etc.Assembly charges of accessories like gasket,doorlocks,copper flexible door earth legend plates etc. and shold be complete with all accessories as detailed above (24.01 to 24.05 )'The Switchgear & accessories, should be of Schneider, L&T, Siemens, ABB,HAVELLES make etc.

Supplying ,installation,testing and commissioning of indoor ( single/door) cubical type Sub/ main panel.The panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables, ducting, switchgear intallation and properly supported compartmentalized bus-bars interconnection between bus-bars and switchgear with auxiliary bus-bars insulated conductors/strips etc. The panel shall be fabricated from 14G/16G CRCA sheets, base frame 75X40X3MM angle duly painted with primer and two coat of grey powder coated paintand,and should be complete with following switch gear and other accessories as detailed below

The panel fabricted should be of cubical type,Indoor type, Single door, Floor mounted , fixed type, free standing single front, dust proof & compartmentalized Sub Panel Panel made out of M.S. CRC Sheet 14G16G, duly painted with Siemens Grey Powder Coated Paint As per Specification Approximate Size (H) 700MM X (W) 500MM X (D) 200MM.

Assembling of 100A 4Strip Aluminium Busbar (Horizontal/ Vertical) & Earth strip throughout the lenth of panel (current density of Aluminium Busbar shall be 1mmx1mm=1.0 Amp.) Aluminium shall be Electric Grade E-91 , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black.

Assembling of Aluminium solid/ Copper flexible wire interconnection Busbar to MCCB & MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables.

Providing , installation and testing of Control Wiring with Copper flexible Wire (size of control wire shall be 2.5 sq. mm Copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc.

The cost of panel should be complete with Assembly charges of 100A 4 strips Busbar (horizontal/vertical & earth strip throughout the length of panel (current density of aluminium busbar shall not be less than 1.0 amps/ mmsq. .Aluminium shall be electric grade E-91E,busbar supports shall be DMC eposy insulator .All busbars links shall be covered /insulated with heat shrinkable sleeves of coloured coded Red,Yellow,Blue& Black.Approximate size of panel H-700 X W-500X D-200mm.Assembly charges of aluminium copper solid /copper flexible wire interconnections in ACB/SWITCH & ACB/MCCB to field side for cable termination duly covered/insulated with heat shrinkable sleeves of coloured coded Red,Yellow,Blue& Black.All interconnections offields side are supported by conical L & Fingers type insulators of adequate size to support sustain the weight of cables .control wiring with copper flexible wire (size of control wire shall be 2.5 sqmm copper fexible for CT circuit & 1.0 sqmm for control & 1.0 sqmm for scada wiring) with thumbles printed sleeves,tie & belt etc.Assembly charges of accessories like gasket,doorlocks,copper flexible door earth legend plates etc. and shold be complete with all accessories as detailed above (24.01 to 24.05 )'The Switchgear & accessories, should be of Schneider, L&T, Siemens, ABB,HAVELLES make etc.

Haminder Pal

Rakesh Kumar

Sharma and Company

M/s Naresh Elecric Works