Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.0 LAccepted-AOC ASHIRWAD H NO 481 FF1 PART VIDHYA ENCLAVE VOLANT BETIM ALTO PORVORIM BARDEZ GOA | NORTH GOA | GOA | 403001 | 1 | Accepted-AOC Being lowest bidder |
Tender Value
₹5.0 L
EMD Value
₹10,085
Closing Date
17 Feb 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
jose thomas landes
W.D. XX PHE PWD FATORDA MARGAO GOA
Urgent maintenance to RWSS Codli in VP Kirlapal Dabal in Dharbandora Taluka
2023_PWD_6808_1
PWD/WD-XX(PHE)/TN/2022-23/14 line 3
Open Tender
Civil Works - Water Works
Item Rate
45 days
W.D. XX PHE PWD FATORDA MARGAO GOA
Please refer Tender documents.
3 documents required · 3 mandatory
₹3,000
₹10,085
3 Jan 2024
23 Jan 2023
20 Feb 2023
23 Jan 2023
17 Feb 2023
23 Jan 2023
Amount
Supply of WILO Mather and plant make water lubricated 150mm size submersible pump set suitable for vertical installation in borewell/openwell. The pump and motor shall confirm to IS 8034/1976 and 9283/1976 respectively. The pump set shall be be suitable to operate on 390-440 Voltsm 3 phase, 50cycle /second AC electric supply. the submersible pumpset shall have the impellers of SS, pump shaft & sleeves stainless steel and pump bowls. stage casing & suction cast iron. the pumpset shall have built in non return valvem stariner gurad, standard cable lead etc. complete. the pumpset shall be suitable to deliver discharge against the respective dynamic head as detailed below. Head:105mtr Discharge:54m3/hr
Supply of powder coated floor mounted indoor type starter panel suitable for 35HP submersible pumpset using 16swg CRC sheet & mounted of MS angle frame of 40x40x5mm. The enclosure will have concealed inges and neoprene rubber gaskets for all doors and openings. Detachable gland plates to be provided at the bottom for cable entry. the starter panel will be having following electrical components with internal wiring. 1. ML3 starter-1No. 2. 100A SFU with fuselink-1No. 3. Cntrol MCB with fuse -1No 4.MCB 25 ATP for capacitor -1No. 5. 15KVAR capacitor -1No 6. RYB indicating lamps with VIF meter-1 set 7. Push button with trip indication-1Set
Supply of 10mm2 x 3 core submrsible cable
Supplying at store or site of work including railway freight, carting, loading and unloading, stacking etc. C. I. double flanged pipes-PN10 horizontally cast conforming to IS: 7181-1986 bearing ISI mark as per the length mentioned below . Barrel Length of 2.75 metres
100mm dia
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Sluice valve conforming to IS : 14846-2000 and bearing ISI mark double flanged with cap. TYPE P.N. 1.0 (Class B )
100mm dia
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Double orifice type air valve similar to glenfield fig. H 7, or IS14845/2000 screwed on isolating valve small orifice, elastic ball resting on a bronze orifice nipple, large orifice vulcanite ball resting on a moulded seating, inlet faced and drilled BST "D" suitable to working pressure of 10 kg /cm2 TYPE P.N. 1.0 (Class B)
50mm dia
Conveying carefully from stack at site, 250m from both sides rolling and lowering in trenches, laying and jointing true to line and level and perfect linking of joints.
Cast iron or Ductile iron or A.C. or S & S or flanged & PVC pipes.
Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I
100mm dia
Fixing C.I. Double orifice / Kinetic type air valve of following sizes with bronze ferrule at inlet screwed on isolating valve small orifice elastic ball resting valve small orifice elastic ball resting on small bronze orifice nipple and large orifice vulcanite ball resting on moulded seat ring inlet faced and drilled to BST "D" suitable to working pressure of 10 kg/sq. cm.
50mm dia
Construction of Reinforcement cement concrete chamber 90x90x150cm inside with 30 cms wall thickness in Cement Concrete 1:2:4 ( 1 cement : 2coarse sand:4 graded granitic or basaltic stone aggrt. 20mm. nominal size ) including centering/shuttering and TMT steel not less than 70kgs/cu.m, for sluice valves or equivalent main valves of suitable diameter, with necessary excavation, 15cms thick rubble packing and 10cms thick foundation concrete 1:3:6 ( 1 cement : 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 40 mm nominal size) and inside plastered with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and as per standard drawing (rate is inclusive of earthwork excavation,and all other materials and labour as per details above ,excluding cost of surface chamber cover) as directed by the Engineer in-charge.
Manufacturing, Fabricating supplying and fixing in position over the main valve chamber. Two/three shutter M. S. cover, manufactured out of 10mm thick M.S. plate ,size (1.2mx1.2m),with bottom angles of size 65x65x6mm supporting parallel in the middle M.S. I beam of size 125x75 as per requirement & size of chamber with both side extended 20cm to 30cm to be fixed in the wall further supporting Diagonal angles and cross angles of size 65x65x6mm to both way perfectly hinged with 8nos of bar hinges capable to withstand heavy vehicle impact 4 nos. of handles made out of 12mm to 16mmdia bar, bottom side locking arrangement for both main shutter as well a side shutter, and welded 4 nos. of holdfast of L.S. 65x65x6mm to 40cm-long 4nos of bar hinges of high strength double angles and hold fast should be embedded in reinforcement concrete of 1:2:4 or richer mix incl. Transportation, labour, Priming coat, painting etc. complete As per standard drawing.(10mm thick ,1.2m x 1.2m, M.S plate , surface cover for R.C.C chamber size, 90cmx90cmx150cm) as directed by the Engineer in-charge.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .