Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.1 LAccepted-AOC | L1 | Accepted-AOC lowest and reasonable | |
| 2 | L2₹33.8 L+₹2.1 L (6.57%)Rejected-AOC | L2 | Rejected-AOC rejected | |
| 3 | L3₹34.4 L+₹2.7 L (8.38%)Rejected-AOC | L3 | Rejected-AOC rejected | |
| 4 | L4₹35.5 L+₹3.8 L (12.0%)Rejected-AOC 01 DUDWAN KUPWARA DUDWAN KUPWARA JAMMU KASHMIR 193222 UDYAM JK 12 0031214 | KUPWARA | JAMMU AND KASHMIR | 193222 | L4 | Rejected-AOC rejected | |
| 5 | L5₹35.8 L+₹4.1 L (13.0%)Rejected-AOC | L5 | Rejected-AOC rejected |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
2 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Srinagar
Garrison Engineer (AF) Srinagar Air Force Station Srinagar-190007
WELCOME MAINTENANCE AND OTHER MISC WK IN OMQ AREA UNDER GE (AF) SRINAGAR
2023_MES_593873_1
GE(AF)SGR- 04 OF 2022-23
Open Tender
Civil Works
Item Rate
365 days
GE (AF) SRINAGAR
As Per Tender Documents
9 documents required · 9 mandatory
₹500
GE (AF) SRINAGAR
₹90,000
Yes
20 Jul 2023
9 May 2023
3 Jun 2023
9 May 2023
2 Jun 2023
26 May 2023
Amount
Material and labour for preparation of old decorated plastered wall surfaces of walls and applying one coat of white wash mixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
Preparation of old plastered / unplastered old decorated surfaces of ceiling / False ceiling, cornices by brooming down or steel brushing, scraping down smoke. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of oil bound distemper on ceiling / False celing surfaces complete all as specified and directed by Engineer-in-charge.
Material and labour for preparation of old plastered / unplastered of walls incl brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots of walls and applying two coat of cement base paint of any tint on old dcecorated surface of walls complete all as specified and direced.
Material and labour for preparation of old plastered / unplastered of walls incl brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots of walls and applying one coat of cement base paint of any tint on old decorated surfce of walls complete all as specified and direced.
Material and labour for complete removal of existing treatment from wall surfaces complete all as specified and directed
M&L applying 2 mm thick in one coat white cement base wall care putty as per manufacturar's instruction complete all as specified and directed on prepared surface vide item No 5
M&L for preparation of surface vide item No 06 of walls and appliying two coats of oil bound distemper of approved colour over one coat of primer complete all as specified and directed.
M&L for preparation of old plastered / unplastered of walls one coat of oil bound distemper of approved colour after taking out old nails, if any, removing old loose layers and applying wall care putty to fill voids and cracks etc wherever required on old decorated surfaces of walls including preparation of surface by washing rubbing down and stopping of distempered surfaces complete all as specified and directed.
Material and labour for one coat of synthetic enamel paint on old painted wooden surfaces of any description over 10cm width or girth including preparation of old painted wooden surfaces of all as specified and directed by Engineer-in-Charge.
Material and labour for applying one coat of synthetic enamal paint on steel surface of any description over 10cm widht or girth incl preparation of old steel surfaces complete all as specified and directed.
Material and labour for french polishing on old surfaces one or more coats if required of any description width or girth including cleaning and preparation of old surfacs and applying a coat of wood filler if required complete all as specified and directed.
Material and labour for writing letters or figures (block, roman, italic or indian) with fluorecent paint not exceeding 30cm height complete all as specified and directed
Material and labour for complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatement/newly plaster surface and applying two coats of anti fungal exterior emulsion paint over a coat of primer complete all as specified and as directed.
Material and labour for preparation of old plastered / unplastered of walls incl brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and eflorescent salts and trading oil & greasy spots of walls and applying applying one coats of anti fungal exterior emulsion paint on old decorated surface of walls complete all as specified and direced.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.
Material and labour for brickwork with subclass 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as speciified and directed by Engr-in-Charge.
Material and labour for Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick wall built in CM 1:4 complete all as specified and directed.
Taking down cement plaster of any thickness racking out joints , hacking for key scrubbing down with water in cluding removal of rubbish of the premises. Note- Any damage of electric wiring / fittings and fixtutres during execution shell be make good by contractor on his own expense with out any cost to govt.
Material and labour for rendering 15 mm thick on fair faces of brick wall mixing with water proofing compound as per manufacturer instruction (Water proofing compound paid for seperately)of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement
Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.
M&L cement plaster 10 mm thick in cement mortar 1:3 on concrete surface such as soffits of RCC slab, ceiling,chajja, roof projection etc finished even and smooth without using extra cement complete all as specified and directed.
Supply only intregal water proofing compound
Material and labour for two coats of cement base paint on newly plastered surfaces of wall over a coat of primer complete all as specified and direced.
Material and labour for two coats of white wash on newly plastered surfaces of wall including preparation of surfaces all as specified and directed
Material and labour for two coats of white wash on newly plastered surfaces as on ceiling including preparation of surfaces all as specified and directed
Material and labour for two coat of oil bound distemper on newly plastered surfaces of wall including preparation of surfaces over one coat of primer all as specified and directed
Re-screwing or easying and adjusting without taking down and tightening hinges in position including adjustment of existing iron mongry for shutter exc 1.5 sqm but nexc. 2 sqm each (iron mongry if used shall be paid under relevant item)
Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) n exc 1.50 sqm each including making good area all as specified and directed.
Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 Sqm & nxc 4.00 Sqm each including making good all as specified and directed.
Taking down shutters of any description size of shutter exc 1 sqm but n.exc 2 sqm and removing from site
S&F pressed steel frame for doors with two rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed.
S&F pressed steel frame for doors with one rebates size of frame 105x60 mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed.
M&L for PCC 1:3:6 type C0 (using 12.5 mm graded stone aggregate) as in back filling of pressed steel frame etc complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed
Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size, mortice lock etc all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560)
(c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581)(d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370). Note:- (i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx A (ii) Floor door spring will be measured & paid separately.
Supply fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832)(c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx A
S&F aluminium powder coated minimum thickness of power coated 50 micron of approved colour ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.50 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 40 mm wide & 4 mm thick frosted glass with aluminium louver patti, S.S wire gauge of 0.36 mm dia and 1.40 width of aperture fixed with 25 x 3 mm think aluminium strip with screw to upper half portion of ventilator including all fitting & fixture and fixed in position complete.
Note:- (i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx A
S&F in repair sheet glass 5.5mm thick, ordinary quality and glazing with aluminium glazing clips and rubber neosprine gasket in square or rectangular, complete all as specified and directed by Engineer-in-Charge.
M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290, Gde-E-165, all as specified.
Supply and fix solid PVC door frame of size 50mmx47mm coloured made out of 5mm plain colour PVC sheet reinforced with M.S all as specification and drawing
Supply and fix 30mm thick factory made solid PVC Moulded Door Shutter with wood free EPS , 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, suppling and fining in frame at site as per specification and drawing
S & F in repair stainless steel lock for aluminium door, size 100 mm , 2 levers complete all as specified and directed by Engineer-in-Charge
S&F 18 mm thick prelaminated MDF Board exterior grade fixed to timber/steel frame work with screws as in cub board shutter colour and design as approved by Engr In Charge incl all iron mongry such as appropriate no of kobs, handles 75mm long, ball catchers,self closing hinges etc
Supply and fixing for 35 mm thick 2nd class hard wood glazed and skeleton shutter’s for door open rebated prepare to receive glass gauge etc edges of framing plain chamfered or rounded fitted with Cut and mitered bead’s for securing glass gauge etc size of marker of shutters as per SSR Part-I Section-8 clause 8.2 (a)
Supply and fixing for factory made 40 mm thick flush shutters solid core construction with block board core and plywood face panels.complete all as specified and as directed.
Supply and fixing for mild steel wire cloth of 0.56 mm nominal dia of wire and averaging of width of aperture 1.4mm, fixed with ms steel wire staples complete all as specified and as directed.
Supply and fix 4mm thick sheet glass, Figured glass, pin head type and glazing with oil putty in squares nexc 0.5 sq. m in each pane including hacking out old broken glass from metal frame complete all as specified and as directed.
Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Supply and fix in repair mild steel wire cloth of 0.56 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.
Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.
Material and labour for two coats of synthetic enamel paint over a coat of primer to new wooden surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.
Supply and fixing 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.
Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.
Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed..
Supply and fix , floor door stopper 140 mm of aluminium alloy body with rubber shoe and tongue, anodised, with hard drawn steel spring and fixed all as specified.
S&F Stainless steel trollies including cutlary tray, plate rack, utensil tray etc for modular kitchen of any size and shape with all asseriores i.e SS sliding Channel 304 grade, SS screws etc as approved fixing in position including necessary drilling, pvc cap,self threading screws complete all as specified and directed
S&F in repairs, mild steel enamelled helical door spring 200/150 mm (ISI Marked) size including roller and roller plate, fixed to wooden/ steel frames by any means as required and directed
S&F floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor all as specified & directed.
S&F in repairs 100 mm hasp and staple safety type aluminuium anodised including bolt to hinge plate and fixed with screw Classic(ISI), Argent(ISI) or Equivelent ISI Marked all as specified & directed.
S&F in repair stainless steel telescopic type sliding Hinges fixed in position for drawer in kitchen cabainate compleye all as specified
30mm width of flaps (when open) continuous (Piano) hinges mild steel bright finish or electro galvanised complete all as specified.
Demolition of concrete in ground floor not exceeding 15cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc. complete all as specified and as directed by Engineer in Charge.
Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed( Note- Any damage of electric wiring/fittings fitures during execution shell be make good by contractor on his own expensive with out any cost to govt)
Material and labour for 10mm thick vitrified parking tiles heavy duty exterior grade texured finished of size300X300 mm laid over and including 15 mm thick screed bed in CM 1:4 as in stair case, roof tarres, path complete all as specified and directed.
All as per item No 65 but in vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick cement plaster with cement mortar 1:4
Material and labour for ceramic (Non skid) tiles area of each tile exc 0.11 sqm but n exc 0.18 sqmx7 mm thick, as in floors, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles bedded over and including 15mm thick pigment to match the colour of screed in cement mortar 1:6 complete all as specified.
Material and labour for ceramic (Non skid) tiles area of each tile exc 0.18 sqm but n exc 0.36 sqm x 8 mm thick, as in floors, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles bedded over and including 15mm thick pigment to match the colour of screed in cement mortar 1:6 complete all as specified.
All as per item 68 above but on vertical surface such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick cement plaster with cement mortar 1:4
Material and labour for any coloured glazed ceramic tiles size of tiles 600x300x7mm thick on vertical surface such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick cement plaster with cement mortar 1:4
Material and labour for 25mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in sub base of floor finish even and rough to receive further floor finishes ( tile/kota stone/ marble ), complete all as completed all as specified and directed.
M&L for RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in foundations, including rafts,footings, foundation beams;plinth beams, bases for columns, etc,basement slabs,under-reamed piles and mass concret complete all as specified .
Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip. complete all as specified and as directed
M&L for 14 to 16 mm thick green stone slab (Udaipur) as in cooking plateform etc set in CM 1:4 and griding and polishing and rounding / moulding the edges complete the finish shall be granite finished for top & edges of slab including dismentling existing stone slab complete all as spcified and directed
Labour only for rounding to edges of granite slabs one edge, such as in cooking platform and other similar work complete all as specified and as directed.
S&F in repairs bib taps long body suitable for 15mm bore pipe long neck fancy type brass CP with, Capstan head screwed down screwed for iron pipe or brass ferrule complete all as specified. Make:- Jaquar - Cat Part No CON-107KN or equivalent make mention Appx A.
S&F in repairs cast copper alloy chromium plated fancy type Central Hole Basin Mixer with Regular Spout without Popup Waste Systemwith 450mm Long Braided Hoses suitable for 15mm bore pipe complete and all as specified. Make:- Jaquar - Cat Part No CON-1 or equivalent make mention Appx A.
S&F in reapirs brass chromium plated Wall Mixer with L bend provision over head shower Arrangement with Connecting Legs, Wall Flanges & Wall Bracket for Hand Shower fixing with GI pipes 15mm dia complete all as specified and as directed. Make:- Jaquar - Cat Part No CON-273KNUPR or equivalent make mention Appx A.
S&F in repairs Chromium plated Jet spray suitable for pedestal pattern water closet with butterfly base and PVC connection pipe with CP brass check nut at one and suitable for 15mm bore pipe/fittings complete all as specified.
S&F in repairs cast copper CP concealed stop cock screwed down high pressure capstan head with CP flange suitable for 15mm bore pipe marked with hot or cold in the head complete including dismentling of tiles/any surface finishes and making good complete all as specified. Make:- Jaquar - Cat Part No CON-089KN or equivalent make mention Appx A.
S&f Cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head complete all as specified. Make:- Jaquar - Cat Part No CON-059KN or equivalent make mention Appx A.
Supply and fixing in repairs 15mm bore Pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long shanks and fly-nuts, screwed for iron pipe, complete and all as specified. Make:- Jaquar - Cat Part No CON-011KN or equivalent make mention Appx A.
S&F Stainless steel curtain rod of metalic 20 mm dia including brackets and finial fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified as directed.
Supply and fixing in repairs Stainless steel sink 1mm thick overall size 915mm X460X203 mm bowl size 410x330x203 mm with drainage board fixed in position including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed.
Supply and fix in repair 15 mm size float valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as directed.
Supply and fix in repair 15 mm size tank Nipple PTMT suitable for HDPE water tank. complete all as directed.
Supply and fixing in repair vitreous china squatting wash down water closet padestral patern EWC ,white, including trap set, seat cover and conection to trap, flushing pipe, etc. complete including making good to floor fixing bolt all as specified and directed.
Supply and fixing in repair vitreous china squatting pan Orissa pattern size 580 x440mm white with integral footrest, including trap set and conection to trap, flushing pipe etc. complete including making good to floor all as specified and directed.
Supply and fixing in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 600mm cocomplete all as specified and directed.
Supply and fixing in repairs 100 mm dia stain less steel grating with waste hole.
Supply and fixing in repairs 100 mm stainless steel grating.
Supply and fixing in repairs chromium plated over head shower 180mm Square with arm 400x25x25mm square shape( (ABS body and face plate chrome plated with rubit cleaning system) for wall mounted shower with flange for fixing in 15 mm dia pipe complete all as specified and as directed.
Supply and fixing in repairs chromium plated health faucet with 8mm dia 1.2 meter long flexible tube and wall hook for fixing in 15 mm dia pipe complete all as specified and as directed. Make: Jaquar - cat part No ALD-CHR-573 or equivalent make mention in Appx A.
Supply and fixing in repairs 15 mm dia PVC connection with PTMT check nut of length 450 mm complete all as specified.
Supply and fixing in repairs 32 mm dia bore PVC flexible pipe for wash hand basin complete all as specified.
Supply and fixing in repairs Vitreous chinaware wash hand basin white, flat back of size 630x450 mm with peddestal , 32mm PVC pipe, excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets and CP waste coupling complete and all as specified
S&F Towel Rack 600mm Long with Lower Hangers fixed with and including chromium plated brass screw and wooden/ Plastic cleats. Make- Jaquar: Cat Part No AQN-CHR-7781 or equivalent make in Appx A.
S&F in repairs corner glass shelf complete all as specified and directed Make - Jaquar: Cat part No ACN-1173 or equivalent make in Appx A
Supply and fixing chromium plated towel rail of 20 mm dia, D type, 600mm long between flanges fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
Supply and fix in repair of towel ring of chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats Complete all as specified and directed.
S&F brass chromium plated toliet paper Holder with flip complete all as specified and directed by Engr In charge. Make - Jaquar: Cat part No CAN-1153N or equivalent make in Appx A.
S&F Chromium plated soap dish complete all as specified and directed By engr in charge
Material & labour removing of tree grown in brick masonry, behind CI pipe, parapets, shafts etc including removing root from wall by chiseling carefully without damaging the structure and making good by brick work in CM 1: 6 incl toothing and bonding complete as specified and directed.
S&F Cabinet mirror plastic body for toilet of size 350x600mm with 4mm thick looking mirror complete all as specified. Make : Prayag-cat Part No 551 or equivalent make in Appx A
Supply and fix glass shelf 600mm long complete all as specified and as directed.
Taking down GI tubing 15mm bore of any description including cleaning for refixing or removal to store complete all as specified and directed.
Taking down GI tubing 20 mm bore of any description including cleaning for refixing or removal to store complete all as specified and directed.
Material and labour GI tubing 15mm dia medium grade galvanized with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Material and labour GI tubing 20mm dia medium grade galvanized with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Refixing old GI pipe 15 mm bore and connections in new or old position to walls and ceiling or laid in floor complete all as specified and directed.
Refixing old GI pipe 20 mm bore and connections in new or old position to walls and ceiling or laid in floor complete all as specified and directed.
Blank
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.
Dismantling of AC, plain or corrugated steel sheeting of any gauge, thickness, complete all as specified and as directed.
S & F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws, complete all as specified and directed by Engineer-in-Charge.
All as per item No 116 but except Sheets Note : Old sheets obtained from item No 115 will be used.
S & F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275
M & L for tightening bolts and closing bolt holes, etc.to rectify the leakage/ seepage, in old roof of corrugated steel sheets by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts if required, all set in stiff white lead Complete all as specified and directed by Engineer-in-Charge.
M&L for Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc steel and iron surfaces and applying two coat of synthetic enamel paint of any description over 10cm width or girth in Camouflaging CCD pattern as approved complete all as specified and directed by Engineer-in-Charge
S&F in repair , 6 mm thick Plywood, grade BWR, type BB, fixed with nails or screws to timber frame work, complete all as specified and as direted by the Engr-in-Charge.
S & F for Wooden planks of second class hard wood, 20mm thick, planed one side and edges tongued and grooved or rebated fixed, in repairs to replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, complete all as specified and directed by Engineer-in-Charge.
S&F pre-painted galvanized aluminium zink coating GI based corrugated steel sheeting 0.50 thk of an colour having tensile strength 550Mpa as in roofing fixed with self tapping screws as specified
Supply and fixing in repair 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.
M&L for Rolled mild steel in roof trusses (framed), trussed, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engineer-in-Charge
M&L for providing cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundations,filling and mass concrete complete all as specified and as directed
Disconnecting existing water tanks exc 500 liters and n.exc 1000 liters setting aside(or lowering if reqd ) including ,Material and labour for cleaning and removing all scale,dirt and funges etc. from tanks and mouth of circulating pipes, with suitable cleaning chemical and brushing the wall and bottom of tanks, washing with clean water, writing letter i.e. "TANK CLEANED ON ......................(Date)" not exc. 100mm height with synthetic enamel paint for tanks of capacity 500 ltrs to 1000 ltrs complete all as specified and as directed.
S&F in repairs, floor door stopper 140 mm of aluminium alloy body with rubber shoe and tongue, anodised, with hard drawn steel spring and fixed all as specified.
S&F in repairs MS Peg set of six power coated as approved by GE
M&L cleaning surface of sunken portion taking out existing material wall/bottom and applying cement slurry @1.2 Kg per Sqm and applying 15 mm thick cement plastred in CM 1:3 finished even and fair using extra cement and applying two coat of acrylic polymer modified cementious slurry as per manufactureas instruction to make the surface leak proof complete all as specified and directed.
Demolition of cement concrete from Sunkan portion in toilet floors exc 15 cm thickness (below or above ground level) including surface finishes of any type such as Mosaic, terrazo tile / tiles complete all as specified and directed.
M&L for mass concerte Type E-2, 1:5:10 using 40mm graded stone aggregate filling in Sunken portion complete all as specified and directed.
Material and labour grinding of kota stone/terrazo floor and polishing with Bee Wax polish complete all as specified.
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel over, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge
S & F in repair Aluminium (Extruded Section body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed
M & L for Easing of Aluminium Door /shutters/CB/ Sliding windows (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening, tightening of thing, adjustement of tower bolts, sliding bolt etc replacement of rubber beading complete all as specified and directed.
S&F in repairs 12mm thick Particle board for insulation purposes as in false ceiling, fixed with nails to timber framework design and pattern of board as approved by Engr-in-Charge.
S&F snap grid for false ceiling of size 600 mm x 600 mm grid EXPOSED GRID SYSTEM fabricated with glavanised iron powder coated section all as shown on serial page No 185 of SSR part II (2020 print) complete all as specified directed by the Engineer-in-Charge.
M &L for 12mm thick Perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame workorwith staples on snap grid complete all as specified and directed by Engineer-in-Charge.
S & F in repair 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws putty to receive finishes complete all as specified and directed by Engineer-in-Charge.
S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished
S & F in repair 100 mm size hasp and staple, stainless steel including bolt to hinge plate and fixed with screws in repairs complete all as specified and as directed by Engineer-in-Charge.
S&F door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws complete all as specified and as directed by Engineer-in-Charge
M & L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 25mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed by Engineer-in-Charge
M & L for Lagging to pipes 15mm bore used in external water supply or plumbing all around with 25mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed by Engineer-in-Charge
S&F in repairs 12mm thick pre laminated Particle board, interior grade, pre laminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber framework complete all as specified and as approved by Engr-in-Charge.
M & L for Welding in repairs exc 2.5cm but n.exc 5 cm in length thickness of metal to welded n.exc 6mm
Dismantling water tanks of capacity exc 500 and n exc 1000 ltr complete all as specified and directed.
Supply and fix rotational moulded PVC water storage tank, 500 ltr capacity (cylindrical vertical type multy layered with closed top) including inlet, outlet andbrass valve, high pressure with polythene float valve of 20 mm . washout holes of approved make hoisted and fixed complete all as specified and as directed.
Supply and fix rotational moulded PVC water storage tank, 1000 ltr capacity (cylindrical vertical type multy layered with closed top) including inlet, outlet andbrass valve, high pressure with polythene float valve of 20 mm . washout holes of approved make hoisted and fixed complete all as specified and as directed.
M/S A.R.TANTARY
M/S ZAHOOR ENTERPRISES
M/S WANI AND SONS
M/S ABDUL REHMAN RATHER
M/S Thakur & Sons
M/S Abdul Ahad Rather
HAJI ZAHOOR HUSSAIN GANIE
M/S LUCKY BUILDERS
M/S FAROOQ AND SONS
M/S BASHIR AND SONS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .