Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹28.6 LAccepted-Finance | 1 | Accepted-Finance Below the estimate | |
| 2 | 2₹28.7 L+₹2,490.24 (0.09%)Accepted-Finance | 2 | Accepted-Finance Above the estimate |
Tender Value
₹29 L
EMD Value
₹29,000
Closing Date
21 Nov 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COMMISSIONER
GUDIYATHAM MUNICIPALITY
Park at Perumal Nagar Ward No7 Block 2 TSNo 373-27 in Gudiyatham Municipality
2022_MAWS_261602_1
E1/9921/2022
Open Tender
Civil Works
Works
90 days
GUDIYATHAM MUNICIPALITY
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹29,000
Yes
GUDIYATHAM MUNICPALITY
28 Nov 2022
7 Nov 2022
22 Nov 2022
7 Nov 2022
21 Nov 2022
7 Nov 2022
14 Nov 2022
Amount
Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc., complete - Narrow Foundations - Upto 2.00m Depth
Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc., complete - Open Earth Work Excavation
Supply and filling in foundation with Filling M-Sand in layer of 15cm thick well water rammed to consolidation including cost and conveyance of Stone Dust to site incluidng labour charges etc., complete as per standard specificataion
Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying with standard specfication.
Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
Plinth Beam
Column
Drain and Paver
Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of crushed stone sand (M - Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials) - Upto Basement
Upto Basement
Ground Floor
Supply and fabrication of steel required for all RCC items of works involved in the schedule, cost of steel at site fabrication, labour charges for cleaning the rods straightening, cutting, bending, tying grills, including overlapping to the required length whenever necessary and placing the reinforcement in position as as per design given and specified in the drawings, including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc complete as per standard specification
Fly ash Brick work in CM 1:5 (one cement & Five sand) using fly ash bricks of size 230 X 110 X 75mm in standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost) - Above Basement
Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.
Plastering with CM 1:5 (One part of cement & five parts of sand) mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specific
Special Ceiling Plastering with CM 1:3 (One part of cement & three parts of sand)mix for 10mm thick including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standar
Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification
Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 75mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.
Supplying and painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).
Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.
Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unshealhed SC.Cu. conductor of 1100V grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall, covered with hylum sheet of 3mm t
Supply and fixing of single box type 4feet 18 Crystal Glass LED Tube Light Fitting complete with electronic ballast with TW round blocks on wall or ceiling with led tube with PVC unsheathed Copper leads from terminals to the fitting.
Supply and fixing of fancy glass shade and 11W CFL for BH Point. SD-80
Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving requi
Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of ce
Suppy and fixing of MS door & window incluidng all other material and labour charges etc., complete
Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement
Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.
Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover wit
Supplying, laying and jointing G.I. Pipes of approved quality and best variety of "B" class pipe of the following dia including labour fixing G.I. Specials, including charges for cutting and threading of pipes, cost of such specials with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc., etc., complete
20mm PVC pipe
20mm PVC Elow
20mm PVC Union
20mm PVC Bend
20mm PVC Tee
tap (Brass)
Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]
Suppy and Fixing of 1200mm dia RCC Ring x 300mm Hight including labour and erection charges etc., completed.
Earthing as per P.W.D. standard with an earth electrode of 2Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work. etc, complete as per standard specifications SD 234
Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5m etc, complete as per standard specifications SD.75
Supply and run of 4 X 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 Gl bearer wire for service connection mains etc, complete as per standard specifications.SD 68
Supply and fixing of TNEB Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 fee
Supply and fixing of 32 A TPN MC switch on incoming and 3 Nos 32 A DPMC Switch (Front Handle) as outgoing with suitable adoptor box with suitable MS cable entry box trunking boxes and internal connections on internal connections on suitable AI frame work
Conducting Geophysical survey, quality and quantity test and transportation charges etc, (This includes labour charges in the field, rent of the vehicle for reaching the place, rent of the instrument and excluding charges for the geologist)
Drilling of 150mm dia vertical bores in hard rock formation to any required depth as directed by the departmental officers including labour charges for inserting casing pipe, assembling in the drilled hole, including welding the joints if necessary grouting the casing pipe etc, and including transportation charges for the rig and supporting vehicles from one place to another place.
Supply and delivery of unplasticised ribbed screen PVC casing pipe of the 150mm dia in 3m length with screwed and socket end and centering guide for every 15m length of pipes as per IS / 12818 / 1992 and as amended from time to time to suit the borewell upto 80m depth (C.S) with ISI marking including, loading, unloading , freight, stacking and transit insurance charges etc, complete.
Supply and delivery of clear water vertical wet type submersible pump conforming to is 8034/2002 and as amended threafter and BEE 3 Star Rated capable of discharging notes 20 lpm x 100 m against head of water column due to all causes. The pump shall be with stainless steel shaft and dyamically balaced bronze or Cast SS impeller, brass screws and CI FG 200 grade two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+- 10 %, 50 HZ +/- 5 %. (TWAD Board Rates in Page No:96)
Labour Charges for inserting PVC casing pipes of 140 mm OD PVC Casing Pipes Assembly assembly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste etc. complete Page No.284
Labour charges for the erection of submersible pump set in bore well/open well including fixing and jointing submersible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges up to the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventer, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pump set and trail run for 10 days.
Supply and delivery of Single Phase Panel Board - Star Delta with two level Guard and auto start suitable for Submersible pumpsets and accessories including all fittings suitable for Submersible pump sets.Panel Board should be provided as per specification. Rates inclusive of Packing, Loading, Freight, Unloading, Stacking, Transit and Insurance charges etc, complete.
Supply, delivery and fixing of UPVC pipe(un-plasticized Polyvinyl Chloride) UPVC used for residential and home applications, water pressure in residential areas do not normally exceed the maximum tolerance.(shedule - 40) etc.,(PWD Board Rates in Page No:106)
Supplying and fixing of PVC insulated and sheathed 3 core 4sq.mm Flat type Copper cable cofirming to IS 694/ 1990 and including cost and conveyance of all materials to site and labour charges etc, complete as per standard specification.
Supply and delivery of 1000 lit capacity and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,complete as per standard specification. TWAD SOR 2021 Item No.17 Page No.85
Supplying fixing of 32mm dia G.I pipe B class with ISI mark standard quality, standard weight including transporting the same to the site directed by the departmental officers etc complete
Earth work excavation and depositing on bank with intial lead of 10m and lift of 2m in narrow trenches for laying of opipes for water supply lworks in the murram gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil as directed bly departmental officers and refill the earth in sides and remove the excess earth etc., complete.
Supplyingand fixing of Bore well fittings as per standard specification as directed by the departmentaol officers etc., complete
32 mm Dia GI Elbow
32mm Dia GI Nipple
32mm CI flangeset with bolt nut insert rubber
40 mm dia Mild steel clamp set
32 mm dia GI Coupling
32mm C.I. borewell motor Adoptor
160mm Borewell pvc endcup
Nylon rope 8mm
32mm Gate valve
20mm Tap (Brass)
Supplying and fixing of Double Swing of height 2.40m height with 40mm dia M.S. pipes support as legs and top bar is 50mm dia. The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.
Supplying and fixing of Two seater SeeSaw for below 12 years old childrens to a height of 0.50m with 50mm dia leaver and 40mm top bar with M.S. Pipes. The seater is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.
Supplying and fixing of Slide for below 12 years old childrens to a length of 3.00m with 80mm dia leaver and 40mm top bar with M.S. Pipes. The seater is of moulded plastic. The ladder frame is made up of 25mm M.S.Pipe, hanrail 20mm dia M.S. Pipe and the centre support is 80mm dia M.S. Pipe The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.
Supplying and fixing of Jungle Gym for below 12 years old childrens to a height of 2.10m with 80mm dia leaver and 40mm top bar with Stainless steel Pipes. The ladder frame is made up of 25mm Stainless steel Pipe, hanrail 20mm dia Stainless steel Pipe and the centre support is 80mm dia Stainless steel Pipe The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.
Supply ,Erection, and fixing of Seated leg press of Pipe using 4" GI pipe, 11/2" GI pipe,11/4" pipe 'B' Class and 5204 Premium Bearing, poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns. Fibre seats of raw materials Fiber Mat: EB 300, 450, 600 & Fibre Resin: GP Resin, ISO Gel coat, Top Coat, Pigment etc,including cost and conveyance of all materials and labour charges etc.
Supply ,Erection, and fixing of Airwalker of Pipe using 2" GI pipe,21/2" GI pipe 11/2" GI pipe,11/4" pipe13/4" 'B' Class and 5204 Premium Bearing & 6202 NTN Bearing , poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns including cost and conveyance of all materials and labour charges etc.
Supply ,Erection, and fixing of Shoulder Wheel of Pipe using 21/2" GI pipe,3/4"(20mm) 'B' Class and 6204 ZZ Bearing 1" * 3/8" GI Bolt, 3* 3/8 GI Bolt, poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns including cost and conveyance of all materials and labour charges etc.
Supply ,Erection, and fixing of Hip Twister of Pipe using 2" GI pipe,21/2" GI pipe,11/4" pipe 'B' Class and 6206 NTN Bearing, poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns including cost and conveyance of all materials and labour charges etc.
Supply ,Erection, and fixing of Double Wheel of Pipe using 21/2" GI pipe,11/4" pipe 'B' Class and 5204 Premium Bearing, poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns including cost and conveyance of all materials and labour charges etc.
Supply ,Erection, and fixing of Single Bar of Pipe using 11/2" GI pipe (40 mm) and poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns including cost and conveyance of all materials and labour charges etc.
Supply ,Erection, and fixing of Rowing Machine of Pipe using 1" GI pipe,3"*11/2",2"*2" Square tube GI pipe 'B' Class and 6206 NTN Bearing, poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns including cost and conveyance of all materials and labour charges etc.
Supply ,Erection, and fixing of Double Spin of Pipe using 11/2",3/4",21/2" GI Square tube GI pipe 'B' Class and 6206 NTN Bearing, poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns including cost and conveyance of all materials and labour charges etc.
Supply ,Erection, and fixing of Stair Stepper of Pipe using 1",11/4",2",4" GI Square tube GI pipe 'B' Class and 6206 NTN Bearing, poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns including cost and conveyance of all materials and labour charges etc.
Supply and fixing of 4metre Length single Bracket pole with Base plate ( 250 x 250 x 6mm) 76.10mm OD x 3.65 mm thick x 4000mm length etc., completed ( PWD SOR Page No.148) Sl No.XV --1
Supply of 25w LED Street light Fitting with LED Etc., completed., ( PWD SOR Page No.115) Sl No.17a
Earthing as per PWD standard specification with on earth electrode of 2m class 'B' pipe of dia not less than 32mm complete. Brass cable event for suitable armoured LTUG cable with earth connection suitable of 4 X 16sqmm etc complete
Supply and fixing of 4 X 16 sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75m for covering the cable complete with 2" dia PVC pipe etc, complete
Supply and laying of ISI Marked 31/2x25sq.mm cable etc., complete
Supply and Fixing of horizontal type 4 way Triple pole neutral MCB distribution board in sheet Steel Enclosure double door of Type with metal door with IP43 Protection with 40A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32A SP MCB AS outgoing in flush with wall and making good of the Concealed portion with earth Connection. The MCBDB and MCB'S Should be with the ISI Mark (like standard make) SD 179. PAGE NO.78
Supply and Errection CCTV Camera 360 Degree angle for Public Safety including of all taxes, materials, labours and fixing etc, complete as directed by the departmental officers.
Armoured cat - 6 Cable ( PWD SOR Page No.153) Sl No.31
POE Switch for Camera - 8 port ( PWD SOR Page No.154) Sl No.33
Hard disk for NVR 6 TB (PWD SOR page No.155) SI 38
Net work video record for CCTV 8 Channel - 1 Sata 1 No Hard disk (PWD SOR Page No.154) SI 34
CCTV Camera SOR (Q)
Rack with Accessories 6U Rack (PWD SOR Page No.155) SI 39 ©
I/O SOKET RJ 45 (PWD SOR PAGE NO.155) SI 37 Q
I/O SOKET RJ 11 (PWD SOR PAGE NO.155) SI 37
29'' LED TV (Q)
Supply and fixing of 20lit capacity tilting type stainless steel garbage bins in park area as per the site condition and as directed by the departmental officers.
Supply and fixing of neccesary flower plants of 2feet to 4 feet height including cost and conveyance of plants and fixing charges for necessary earth work and manure and watering and maintenance the palnts to 30 days and handed over to department. Instruction given by departmental officers.
Neem tree
Peepal tree
Pungai tree
Ashoka tree
Foxtail tree
Fig tree
Naval tree
Ficus plants
temple tree
Providing Three Seater arrangements with Ready made Granite benches 20mm thick Slab with 1500mm wide , 600mm height. The cost shall include all labour and materials and as directed by the departmental officers.
Provision for Goods and Service Tax 18%
CHANDRAN
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .