PROVN OF PARKING SHED FOR ZIL, KARAZ AND URAL VEHICLES AT 7 BRD, AF UNDER GE (AF) TUGHLAKABAD

Amount

Excavation in over areas, n exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in over areas, exc 1.5m but not exc 3 m deep and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling watering & well ramming in layers n.exc. 25 cm thick in soft/loose soil complete all as specified and directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing outside MOD land complete all as specified and directed.

M & L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished concete complete all as specified and directed.

S&F as in roof as in horizontal/ vertical/any position colour bond trapezoidal TRIMDEX profile sheet of 1015 mm effective cover width and nominal 28.5 mm deep ribs with suitable square fluting in the five pans at nominal 203 mm cente to centre. The entire shall be designed for anti capillary action The feed material is manufacture out of nominal 0.5 mm TCT (Total Coated thickness) HI Tensile steel with min 550 MPa yield strength metallic hot dip coated with aluminium Zincalume (55% Aluminium 45% zinc) as per IS-1397-Zincalume AZ 150 (Min 150 gms/Sqm total on both side) with super polyester color bond XRW quality paint coat as per AS/NZS 2728 complete all as directed & specified including 50x5 mm thick Almn stips as in wind tie with self tapping screws with PVC washer complete

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new or previously untreated steel & iron surfaces including one coat of red oxide and applying two coat of synthetic enamel paint of any discription, over 10 cm in width or girth not otherwise described all as specified and diected.

S&F roof trusses(frame), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee angle, channel or fiat sections) including distance pieces cleats etc including welding and fixing with screws complete all as specified and directed of grade 410W(Gde-E-250) Quality.

S&F structural steel work F-410W/Gde-E-250) quality-A as in plates (plain or chequered channels square cut or notch (ordinary and counter sunk) forming holes without any attachment complete all as specified and directed.

S&F plate girder or single stanchions, built up or one beam or channel section with flange plates consisting of ISMB or ISMC section, caps bases splice angle brackets, cleats and other connections welded or fixed with screws, angle brackets, cleat and other connections welded or fixed with screws complete all as specified of grade 410 W(Gde-E- 250)quality -B

Supply & Fix Mild steel screw bolts (machine made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be filed with washers and one hexagonal or square nut exc 22 Scm and n exc 30cm long dia of shank 16 to 20mm M&L for reinforced cement concrete type B2 124 using 40mm graded aggregate as in foundation including raft footing foundation beams plinth beams etc mass concrete all as specified and directed by Engr-in-Charge

M&L for reinforced cement concrete M-25 design mix using 20mm graded stone aggregate as in foundation including raft beams plinth beams etc mass concrete complete all as specified and directed.

M&L deformed or twisted TMT bars 10 mm dia and over cut to length, bent to shape required including cranking bending spiraly for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for point wirng for light points/fan point complete with 1.5 Sqmm (nominal area) FR-PVC insulated, multi stranded, copper conductor cable unsheathed in and including PVC conduit including all fittings medium grade ISI marked and PVC insulated copper conductor cable of size 1.5 sqmm as earth wire, connected to common earth dolly suitable for mounting modular switches including modular metal flush box and modular face plate with frame complete all as specified and directed. Note:-The works includes cutting of chasis and making good disturbed surfaces to match with existing

All as per srl item No- 17 here-in-before but One 3 pin socket out let 15 Amps on independent board, with cables 2.5Sqmm size and earth wire 2.5 Sqmm.

S&F ceiling rose, surface bakelite, 65x20mm three terminal complete all as specified and directed.

M&L modular switch 1 way 6 Amps 1 module, complete all as specified and direcded.

M&L modular switch socket combination multi-purpose two in one, 3 pin, 5 and 15 Amp, flush type complete all as specified and direcded.

Supply & fix of sheet metal enclosures for SPN distrubution boards 8 way, having IP 43 protection, single door flush mounted. Having 200 Amps bus bar for each phase assembly as per IS 86 8623 all as specified and as directed.

S&F MCB SPN, 6 to 32 Amps in 'C' series having current rating 10 KA complete all as specified and directed.

S&F MCB single pole 6 to 32 Amps in 'C' series having current rating 10 KA complete all as specified and directed.

Supply and fixing LED batten industrial type of 40 watt capacity 1200 mm long complete with all standard fitting and fixed with wall /ceiling of height not less than 15 feet and connection from ceiling rose to connection with 3 core from 0.5 sqmm complete suitable for 230 volt AC, 4000 lumen, single phase. 50 HZ power supply complete all as specified and directed.Make:-Philips/C&S/Bajaj/Crompton Greaves

M&L complete for earthling complete with galvanized mild steel earth plate electrode 600x600x6 mm buried directly in ground vertical to a depth not less than 2.25 mtr below normal ground level (with top edge of the earth plate not less than 1.5mtr below ground level) connected to GI wire 4mm dia main earhing lead by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with conneced to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt all around earth plate, test point of phosphorous bronze /gun metal of size 75 mmx75mmx25mm, PCC (1:3:6) type B-1 (using 20mm graded black trap/granite/Basalt stone agregate) for earth pit iron earth strip 32x6mm by means of bolts, nuts, check nuts and washer of galvanized iron including PCC 1:2:4 type B1 (using 20mm graded stone aggreegate) 40mm thick cover renforced with 8mm dia TMT bars 03 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh, and 15mm dia GI medium grade earth lead proection pipe, complete all as specified and directed. Note : Earth wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth strip/protecion pipe etc.

Excavation in trenches not exceeting 1.5 Mtr wide and not exceding 1.5 Mtr in depth and getting out in Hard/Dense soil for laying cables complete all as specified and directed.

Returning, filling in including spreading, levelling watering & ramming in layers n.exc. 25CM thick in soft/loose soil complete all as specified and directed.

Removing excavated material not exc. 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

Supply and filling dry river sand in trenches for cable cushioning complete all as specified and directed.

Supply and laying bricks sub class B designation 75, laid flat in trenches for protection of cable over for LT cable complete all as specified and directed.

Supply,laying testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade of the cross sectional area 10 sqmm 2 core complete all as specified and directed.

M&L for GI tubing light grade with all fittings laid in ground for cable protection of size 40 mm dia complete all as specified and directed.

M/s Hemakshi Enterprises

POOJA ENTERPRISES

M/s Vijay Enterprises

M/S S.K.Electricals

Neeraj Enterprises