SPECIAL REPAIR BY PDG. 4 LANNING OF H.T.B. ROAD WITHIN M.C. LIMIT AT BHIWANI FROM KM 83.06 TO 85.01 IN DISTT. BHIWANI (ROAD ID- 2223) (PDG. STREET LIGHT).

Amount

Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp. HSR -23.22.1.9.

MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings. MCCB up to 125 A FP. HSR -23.22.2.1

Supply and election of Goodridge Almirante type M.S. pedestal made of 50 mm *50 mm * 6 mm angle Iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and looking arrangement with the Godrich type handle including round bars. The to covering should have a downward overhang of 75 mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four No’s. holes to discharge the heat produced by suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embedded upto the entire depth in 1:2:4 cement concrete block, projected 75 mm all around the pedestal and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work. M.S. pedestal of size 750 mm wide, 900 mm high, 300 mm deep and bottom totally open , duly embedded in cement concrete block of size 900 mm*450 mm*200 mm above ground level , having a base of size 1050 mm* 600 mm* 250 mm below ground level. HSR -23.27.2.

Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. HSR - 24.1.1.

Extra for using salt and char coal/coke for pipe earth electrode as required. HSR - 24.1.2

Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required. HSR -24.1.6.

Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop carthing as required. HSR -24.1.13.

Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core. HSR -24.2.7.3.

Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer- in-charge of the work. 25 sqmm. (HSR 24.2.8.5.

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. i) 40 mm dia. HSR 24.4.7.2.

Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1 :5: 1 O of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge.24.4.8.7: 9 Mtr Long pole with top dia 100 mm and bottom 200 mm with base plate of size 350 x 350 x 20 mm. HSR- 24.4.8.4.

Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts markd with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect upto the entire satisfaction of Engineer- in-Charge. Submersible Copper Cable 3 Core. 1.5 sqmm HSR-24.5.1.1.

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia. HSR 24.5.2.3.

Digging & refilling of trench 30 cm wide below ground level for erection of pipe/cable (up depth of 1 Mtr. Underground cable excluding the cost of cable/pipe complete in all respect. HSR 24.10.1.

Non Schedule Items:- NS items :- Pdg. trench less boring below existing road / pavement including laying of 65 mm dia GI pipe B class required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work.

Non Schedule Items:- Supply and erection of under ground Aluminum Armoured cable XLPE insulated loose in existing pipe or trenches complete with necessary connection. Make RR / Havells / Polycab. 25 Sq. mm 4 Core Cable .

Non Schedule Items:- Supply & Erection of double arms bracket made of 32/50mm dia GI pipe B class ISI 1.20 mtr. Long with coller pipe (GI) 75mm dia 60cm Long top covered with ornamental cap duly welded, painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Bracket duly erected on existing 7/9 Mtr. High Octagonal pole.

Non Schedule Items:- Supply, erection and commissioning of Timelite 63 A. 3 pole / 230V Astronomical time switch Indo Asian / L&T / Havells make automatic Timer ON/OFF the street light, pillars, wall, MS pedestal where ON/OFF point is available cabinet is fabricated from 22 gauge MS sheet painted, wiring, connection ON/OFF from the bottom of the cabinet the lite DB IP 54 protection complete with Digital timer, 32A. TPN MCB (Indo-Asian), fuse unit, indication lamp suitable for switch from rectifier system, switching system Bakelite connector 32A. Digital timer, auto / manual system, time setter, fiber sheet rubber & plastic components, wiring & component fitting, chemical (Epoxy) including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of the work.

Non Schedule Items:- Supply & Erection of Ring / coller bracket on existing pole with nuts and bolts. Bracket made of 50mm dia GI pipe B class ISI 1.0 mtr. dia ring with 4 no. support 50mm dia bottom GI coller pipe (GI) 100mm dia 60cm Long top covered with ornamental cap duly welded, 4 nos. hole in ring pipe for erection of flood light fitting painted 2 coats of aluminium paints on bracket including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Bracket duly erected on existing Octagonal pole.

Non Schedule Items:- S/E of 120 W LED street light fitting 110 Lumens per Watt 4000 K in pressure die cast aluminum housing with High Power LED lighting source with seperate driver compartment with IP-66 protection and impect resistence of IK07 with internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. Make: Philips / Bajaj/ Havell's/ Crompton.

Non Schedule Items:- S/E of 100 W LED Flood light luminaries with high power LED 110 Lumens per Watt 4000 K with high luminous effecacy, protected IP-66 with internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. Make: Philips / Bajaj/ Havell's/ Crompton.

J.B.S.Electrical Co.

Rajesh Electric Works

Dhamija Power Constructions

DEVENDER KUMAR CONTRACTOR