Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.1 LAccepted-AOC NEAR SADHURAM SCHOOL RAGHUNATHGANJ KATNI MADHYA PRADESH 483501 | KATNI | MADHYA PRADESH | 483501 | L1 | Accepted-AOC Lowest Amount Quoted | |
| 2 | L2₹8.1 L+₹6,350.90 (0.79%)Rejected-AOC | L2 | Rejected-AOC Highest Amount Quoted |
Tender Value
₹9.8 L
EMD Value
₹9,750
Closing Date
9 Feb 2024, 3:00 pmClosed
Executive Officer, Arasiramani Town Panchayat
Town Panchayat Office, Arasiramani, Kullampatti (PO). Arasiramani-637101
Renovation of community Toilet at Ward No.7 Chettipatti Vanniyar Street, Ward No.5 Sunnambu Soolai in Arasiramani Town Panchayat.
2024_DTP_418683_1
23/2024
Open Tender
Civil Works
Works
90 days
Arasiramani Town Panchayat Limit
Asper Norms
1 document required · 1 mandatory
₹0
₹9,750
Yes
27 Feb 2024
3 Feb 2024
9 Feb 2024
3 Feb 2024
9 Feb 2024
3 Feb 2024
Amount
Dismantaling existing Damaged Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Cuddapah Slab including removing the debries away from the site and all labour charges etc. complete. PWD SOR 2023-24 (W-0042)
Plain Cement Concrete 1:4:8 Mix (one Part of cement, four Part of M- Sand and Eight Part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.
Laying with new C.C. Laminated tiles (Like Dora tiles Eurocon tiles etc),(anti skid) of 20mm thick of approved spl quality and set in Cement Mortar 1:3 (1 of cement and 3 of M- Sand ) 20mm. Thick using river M- Sand and pointing with colour cement using at the rate of 0.40 kg/M2 and mixing with colour pigment at the rate of 0.3 Kg/M2 including finishing complete with Standard Specification and as directed by the DePart ofmental Officers etc.,
Painting the new walls two coats over one coat of priming with best Cement paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers (S.l.No.359-A)
Supply and delivery of following pipe line (with ISI mark) materials should be got approved by the Engineer incharge before fixing as directed and including conveyance of all materials to site etc., Complete as per standard specification etc complete.
32mm CPVC Pipe
32mm CPVC Tee
32mm CPVC elbow
25mm CPVC Pipe
25mm CPVC Tee
25mm CPVC elbow
Brass Chromium Plated Screw Down Tap 15 / 12mm dia (Heavy Type)
110mm PVC
110mm PVC Door Elbow
110mm PVC Elbow
110mm PVC Tee
110mm PVC bend
110 End Cap
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (6 points per coil) etc.SD-20)
Supply and fixing of 18W 4 Feet LED Fitting with LED and 25W LED Street Light Fitting with LED ur charges and other incidental charges to site etc., complete. as per standard specification
Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,
Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.
Supply and Fixing of Bison Panel Doors with Necessay Accessories and Locking Arrangements including cost and conveyance of all materials and labour charges etc., complete as per standard specification
Plastering in Cement Mortor 1:5 Mix (one cement, five P.sand) 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.
Supplying and fabrication of M.S. Grill using " L "ANGLES of approved design for truss using necessary mild steel flats for inner and outer members which should be fixed to "truss" inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.
Supplying and Fixing in position best approved of quality Weld mesh of Size 7.50 x 5.00 cm of 10 Gauge with one coat of Red oxide Primer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. including phosphating as per ISI with rust preventive primer & ready to assemble condition for easy installation at site including dismantling making necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. and Steel Door Complete as Directed by the Departmental Officer.
Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2.
Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains
Painting two coats over the new wood work using ready mixed enamel paint including cost of all materials to site and all labour charges for mixing applying etc., Complete as per Standard Specifications Rate for 10 Sqm
Providing fencing with chain link diamond mesh 50mm x 50mm size made of 10 swg GI wire,including the cost of G.I binding wire and top of the mesh linked with 10 swg GI wire etc., completed-. 10m2.( consider 30m x 1.80m )
Painting one coats over the old iron work using ready mixed enamel paint including cost of all materials to site and all labour charges for mixing applying etc., Complete as per Standard Specifications Rate for 10 Sqm
Plastering in Cement Mortor 1:5 Mix (one cement, five M- Sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.
V.V.AND CO
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .