REPAIR TO SEWAGE SYSTEM, MANHOLE COVER, CLEANING OF SEWAGE LINE, SEPTIC TANK, MANHOLE, SOAK WELL AND REPAIR TO DRAIN, DRAIN COVER, FOD TRAP, FIRING RANGE AND HARD STANDING IN TECHNICAL AREA AT (AF) STATION JAISALMER

Amount

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of drain pipes, or for manhole, etc., not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removing excavated material nexc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness (below or above ground level) etc complete all as specified.

Demolition and breaking up drain pipes of 150 mm dia (Salt glazed ware ,AC or Reinforced concrete ) set in cement mortar including bedding haunching complete all as specified and directed by Engineer-in-Charge.

M&L in replacement of 150mm bore pipe reinforced concrete, class NP2, laid and jointed complete with collars complete all as specified & as directed.

M&L in replacement of 150mm bore Salt-glazed stoneware (SGSW) drain pipes laid in trenches and jointed complete with collars complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete all as specified and directed.

Demolition of stone/brick masonry built in cement mortar including coping etc complete all as specified and directed by Engineer-in-Charge.

M&L for precast cement concrete solid blocks ( 1:3:6 ) type C-1 (using 20 mm graded stone aggregate) exc 10 cm in width as in block masonry built in CM 1:4 etc complete all as specified and directed.

M&L for square rubble walling Jodhpur type brought up to courses well bonded, bedded and solidly hearted in cement mortar 1:6 etc complete all as specified and directed.

Taking down cement plaster of any discription on any surfaces, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on stone / concrete block masonry surfaces other than fair faces of concrete / brick is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) in coping, benching of manholes etc, and including necessary formwork and including demolition of existing PCC complete all as specified and directed by Engineer-in-Charge.

M&L for pre-cast RCC 1 : 2 : 4, type B-1 (using 20 mm graded stone aggregate) in cover slabs for man holes etc, set in CM I : 6 and including demolition of old slabs complete all as specified and directed by Engineer-in-Charge.

M&L for MS TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge.

S&F for Providing FRC manhole covers with rectangular frame of size 44"x26" M-10 fixed at site up to satisfactoin of Engr-in-Charge and including dismentling of old manhole cover slab complete all as specified and directed.

S&F for Providing FRC manhole covers with rectangular frame of size 22"x28" M-10 fixed at site up to satisfactoin of Engr-in-Charge and including dismentling of old manhole cover slab complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for Jodhpur stone roof slabs, self faced 7.5 cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement motar 1:6 complete all as specified and directed.

M&L for removal of blockage in between WC and nahani trap/WC to Ist manhole / floor trap to nahani trap etc. by flexible roding and removal the all dirt up to a distance of 100 m complete all as specified and directed. Note :- (i) In case a blockage reoccured with in 7 days the same shall be removed without any extra cost of the Govt. (ii) Cleaning of line in between manhole where in the blockage remove shall deemed to incl the rate coated. (iii) If contractor failed to clear the blockage with in 24 hours from the receipt of complaint, a penalty of Rs 50 per day will charge up to 7 days and after 7 days same will be Rs 100.00 till completion of complaint.

M&L for cleaning of septic tank /soak well of 100 users capacity by balling out taking out sludge and removing the sludge to a distance exceeding 1.5 Km but not exceeding 2.00 Km from the camp area and including removing stone patti/RCC cover slab and refixing complete all as specified and directed.

Description all as per item No.23 above but 50 users.

Description all as per item No.23 above but 25 users.

Description all as per item No.23 above but 10 users.

Cleaning and desilting of manholes of any size,depth not exc 1.00 mtr by excavating sewage wet/dry soil/tree roots in foul condition and removing the waste in covered vehicles outside MD land by taking all necessary precautions and including pumping out fluid, cleaning of sludge from manhole, placing the cover of manhole in position complete all as specified and directed.

Cleaning and desilting of manholes of any size,depth exc 1.00 mtr but not exc 2.00 mtr by excavating sewage wet/dry soil/tree roots in foul condition and removing the waste in covered vehicles outside MD land by taking all necessary precautions and including pumping out fluid, cleaning of sludge from manhole, placing the cover of manhole in position complete all as specified and directed.

Cleaning and desilting of septic tank/soakage well of any size & depth by complete removing of sewage wet/dry soil/stone boulders/tree roots by manually or mechanically including removing the cover slab, the waste shall be removed in covered vehicles outside MD land by taking all necessary precautions and including pumping out fluid, cleaning of sludge from septic tank/soakage well, placing the cover in same position complete all as specified and directed.

Cleaning of sewage line of 100/150/200 mm bore by roding and flush water in line after roding to clean the line complete all as directed by Engineer-in-Charge. Note:- The contractor shall arrange safaiwala immediately as receipt of complaint and ensure that complaint is resolved within 24 hours and no lapses will be allowed. Note :- (i) In case a blockage reoccured with in 07 days ,the same shall be removed without any extra cost to the Govt. (ii) cleaning of line in between manholes where in the blockage remove shall deemed to incl the rate coated.

Taking down GI Pipe any grade 15mm dia etc complete all as specified and directed.

Description all as per item No.31 above but 20mm dia etc complete all as specified and directed.

M&L for Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 15 mm complete all as specified and directed.

M&L for Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 20 mm complete all as specified and directed.

S&F for Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs white coloured vitreous china wash down water closet pan (Pedestal pattern) with and including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair Stainless steel Jet Spray with braided tube 1.5 m complete all as specified and directed.

S&F in repair Health faucet with 1.5 mtr stainless steel tube and hook complete all as specifided and directed.

S&F in repair 10 ltr cap. PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repairs PVC connection 15mm with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs 32mm Waste coupling of PTMT (half or full threaded) . (Minimum weight-45gms/40mm-60 gms) complete all as specified and directed.

M&L for repair vitreous china sqatting pan "orissa" pattern of size 580x440mm white with integral foot rests, P or S trap etc complete all as specified and directed.

S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S&F for 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S&F for 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F for 75mm bore PVC (SWR) bends any radius etc complete all as specified and directed.

S&F for 75mm bore PVC (SWR) bends any radius provided with access door etc complete all as specified and directed.

S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequa with access door etc complete all as specified and directed.

S&F for 75mm bore PVC (SWR) vent cowl etc complete all as specified and directed.

S&F for 110mm bore PVC (SWR) bends any radius etc complete all as specified and directed.

S&F for 110mm bore PVC (SWR) junction single(Single T) equal or unequal provided with access door etc complete all as specified and directed.

S&F for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequa with access door etc complete all as specified and directed.

S&F for 110mm bore PVC (SWR) vent cowl etc complete all as specified and directed.

S&F in repair PVC (SWR) 'P’ trap complete all as specified and directed.

S&F in repair PVC (SWR) 'S’ trap complete all as specified and directed.

S&F for 75mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement & jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as specified and directed.

S&F for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L for 75MM thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as sub base complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Dismantling floor, hearth or wall tiling or stone partitions including cement mortar bedding (but not backing) removing, serviceable tiles to stone and rubbish off the premises complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surfaces 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM 1:4 on other then fair faces of brick work etc complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular)area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 etc complete all as specified and directed.

M&L for Chequered robber molded cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neatcement slurry in floors with grey cement and pigments complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar 15 mm thick in cm 1:6 for laying floor finishes complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) finishing surface even and smooth without using extra cemnt as in floor & Plinth protection complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and directed.

Demolition of Brick work of stone/boulder masonry, built in cement mortar excluding ashlars facing dressed stone work and pre-cast concrete etc complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded aggregate as in foundaton, filling and mass concrete etc complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate ) in surface channels, drains and benching for main hole and finishing of exposed surface of concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C1, using 20mm graded aggregates as in copings including weathering, slightly rounded or chamfered angles and throating and necessary form work and finishing the top surface of concrete even and smooth without using extra cement complete all as specified and directed.

M&L for precast cement concrete (1:3:6) type C1 (20mm graded stone aggregate) solid block masonary exc 10 cm in width and set in CM (1:6) complete all as specified and directed.

M&L for square rubble walling Jodhpur type brought up to courses well bonded, bedded and solidly hearted in cement morgtar 1:6 complete all as specified and directed.

Extra over above item for hammer dressing to face stones with maximum depressions on face from a stright edge not exc. 20 mm and dressing face beds and joints as specified to SR walling Jodhpur type brought upto courses complete all as specified and directed.

M&L for keyed pointing to squared rubble/jodhpur type stone masonry, coursed or uncoursed in CM 1:4 complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on stone / concrete block masonry surfaces other than fair faces of concrete / brick is to be finished even and smooth (without using extra lime or cement) including taking down old plaster complete all as specified and directed.

M&L for preparation of newly plastered of wall surfaces and applying two coats of cement based paint over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified and directed.

Demolition of reinforced cement concrete as in cover slabs for drains etc complete all as specified and directed.

M&L for providing precast cement concrete type B-1 1:2:4 (20 mm stone aggregate) in landing cover slabs to drains with and including formwork as required and set in CM 1:6 etc complete all as specified and directed.

M&L MS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as complete all as specified and directed.

M&L for 75MM thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as sub base complete all as specified and directed.

M&L for 100mm thick cement concerete 1:2:4 type B-1 using 20mm graded aggragete in alternate bays all as specified and directed.

M&L for 30mm thick Wearproof granolithic metallic hardner concrete as specified in manufacturer instructions (included metallic hardner) and as directed by Engineer-in-Charge.

M&L for rubber moulded chequered cement concrete tiles of any size, 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for rubber moulded precast conctete interlocking paver block any shape and size with gray cement and pigment confirming to IS -15658-2006 of 80 mm thickness, M-40 Grade with grey cement with pigment over and ncluding 25 mm thick sand cushioning below paver tiles laid to required level and slope complete all as specified and directed.

M&L for coloured Johnson endura tiles size 300mm x 300mm x 12mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 15mm thick screed bed in cement and sand mortar 1:6 complete all as specified and directed.

S&F in repair Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of red oxide primer over newly Steel surface including necessary preparation work of any description over 10cm width or girth complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Welding in repairs n. exc 2.5cm in length thickness of metal n.exc 6 mm complete all as specified and directed.

Forming embankments including raising (or lowering) for firing range with screened sand saw dust in the mixture of ratio 1:1 passing from 2.18mm screen, spreading in layers not exceeding 30cm thick, watering, ramming/rolling and finishing to required size, shape, etc., not exceeding 1.50m high from base including supply of approved sand and saw dust including excavation and removal of sand and saw dust outside Air Force campus exceeding 5.0KM but not exceeding 10.0KM from work site etc complete all as specified and as directed. Note:- Quantity shall be calculated based on finished measurements and no deduction in quantity for compaction shall be applied for payment purpose.

Description all as per item No.92 above but exceeding 1.50m but n.exceeding 3.00m high from base complete all as specified and directed.

Description all as per item No.92 above but exceeding 3.00m but n.exceeding 4.50m high from base complete all as specified and as directed.

Description all as per item No.92 above but exceeding 4.50m but n.exceeding 6.00m high from base complete all as specified and as directed.

Forming embankments including raising (or lowering) for firing range with screened sand saw dust in the mixture of ratio 1:3 passing from 2.18mm screen, spreading in layers not exceeding 30cm thick, watering, ramming/rolling and finishing to required size, shape, etc., not exceeding 1.50m high from base including supply of approved sand and saw dust including excavation and removal of sand and saw dust outside Air Force campus exceeding 5.0KM but not exceeding 10.0KM from work site etc complete all as specified and as directed. Note:- Quantity shall be calculated based on finished measurements and no deduction in quantity for compaction shall be applied for payment purpose.

Description all as per item No.96 above but exceeding 1.50m but n.exceeding 3.00m high from base complete all as specified and as directed.

Description all as per item No.96 above but 4.50m high from base complete all as specified and as directed.

Description all as per item No.96 above but exceeding 4.50m but n.exceeding 6.00m high from base complete all as specified and as directed.

deepaktraders (BID ID -3328322)

M/S VISHNOI ENTERPRISES (BID ID -3328749)

S K TRADER (BID ID -3326533)