Spl rep of non expl storage bldg P54 at NAD Renovation and Rep to seepage leakage of roof slab of md accn bldg No P15 P16 P19 P20 P21 P22 P23 P25 P29 and P56 at 2W Det and Addn Altn to to the bathroom 1st Floor of DSC line Bldg No P96 at INS gmk

Amount

Dismantling mangalore pattern roofing tiles with ceiling tilles or slate roofing bedded in line or cement mortar complete all as specified and directed by Engr-in-Charge

M&L for cleaning of roof tops including removing the existing treatment by brooming down with steel wire brushing scrapping down with steel scrapper and roughening the existing surfaces to receive plaster complete all as specified and as directed by Engineer-in-Charge. Note: The debris out the cleaning/removing/ scraping shall be removed out MD Land complete all as specified and as directed by Engr-in-Charge

M&L for providing 10mm thick cement plaster over roof slab (over the area of dismantled roof treatment ) in cement mortar 1:3 finished even and smooth without using extra cement with WPC complete all as specified and as directed by Engr-in-Charge. Note:WPC shall be measured and paid separately)

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. as specified and directed by Engr-in-Charge.

M&L rendering 5mm thickness in cm 1:3 on soffit of ceiling finished even and smooth complete all as specified and directed by Engr-in-Charge.

M&L rendering 10mm thickness in cm 1:6 on fair faces of wall finshed even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering in two layers (10+5) in cement mortar 1 : 4 on brick/cement/stone surfaces and finishes the surface even and smooth without using extra cement including mixing with liquid WPC on top layer of rendering of 5mm thick only complete all as specified and as directed by Engr-in-Charge. Note :- Water proofing compound will be paid separately

Supply only liquid water proofing compound.

Demolition of brick work or stone/boulder masonry built in cement mortar, complete all as specified and directed by Engr-in-Charge.

M & L Precast cement concrete block masonry grade C-1(1:3:6 using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in mortar 1:6 complete all as specified & directed by Engr-in-Charge.

M & L for reinforced cement concrete (nominal mix) in type B1 1:2:4 (20mm graded aggregate) slab supported on walls beams and columns in floors, roofs, landinings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed by Engr-in-Charge.

M&L for TMT bars 10mm dia & over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engr-in-Charge

Use & waste of formwork to to soffits of suspended salbs such as roof slab or shelves and vertical sides of concrete and similar for rough finished flat surfaces of concrete complete all as specified and directed by Engr-in-Charge.

M&L for providing three coats of white wash on new plastered ceiling surfaces including necessary preparation to surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for 3mm thick Birla white wall care putty on wall including preparation of new surfaces with necessary sand paper for applying two coats of distemper oil emlusion over a coat of alkali resistant primer complete all as specified and directed.

M&L for applying two coat of acrylic emulsion exterior paint (anti fungal paint) over a coat of acrylic emulsion primer on newly plastered surfaces of wall including preparation of surface of any description complete all as specified and directed by Engr-in-Charge.

M&L for providing one coat of white wash on old ceiling surfaces including necessary preparation to surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old surfaces of wall with necessary sand paper for applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of acrylic emulsion exterior paint (anti fungal paint) on old plastered surfaces walls and corniers incl preparation of surfaces by brooming down or steel wire brushing scrapping down with steel scrapper smoke soot moulds moss and efflorescent slats brading oil and greasy spots etc and making proper surface by applying ready mix preparatory putty wherever required complete all as manufactorers instructions (manufactored by : asian paint apex ultima)

M&L for 100 mm thick cement concrete type, D2 1:4:8 using (40 mm graded aggregate) as sub base of flooring complete all as specified and as directed by Engr-in-Charge.

Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile not exceeding 0.18 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 20mm thick screed bed of CM 1:4, complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including screed bed of 20 mm thick in CM 1:3 all as directed by Engr-in-Charge.

M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, etc over & including 10 mm thick backing coat in CM 1:3,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mmirror finished complete.

S&F in repairs vitreous china wash basin, white, ovel shaped back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, 32mm dia chromium plated grating and 40mm PVC pipe upto floor trap complete all as specified and as directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) pedestal pan and trap including connection to drain and to flushing pipe ,antisyphonage pipe , plastic water closet seat,black ,closed pattern with flat bottom ,cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-Charge.

S&F in repairs for rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and in position all as specified in SSR Part-I complete all as specified and directed by Engr-in-Charge.

S&F 25mm ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed.

S&F for 25mm gun metal globe or gated valves with iron wheel head screwed both ends for iron pipe and fixed.

Dismantling CI pipes 100 mm dia

Dismantling CI pipes 75 mm dia

S & F for 110mm bore uPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for 75mm uPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.

M&L for 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engr-in-Charge.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

Taking down Chowkhats or frames exc. 1.50 sqm but not exc 4.00 sqm each with shutters (without taking off shutters from the frames).

M&L for providing “RAJSHREE” brand factory made 25mm thick 100% solid WPC (wood polymer composite) coloured laminated flush door shutter of required size comprising of virgin PVC resin of K value 57.60(suspension grade) , calcium carbonate and natural fibers (wood powders/rice husk/wheat husk (non toxic additives, made from extrusion process WPC foam single extruded (inner) with having minimum density not less than Kg/cbm manufactured y “RAJSHRI” an ISO 9001- 2015 Certified Company, having good screw holding capacity (Screw withdrawal strength of 2000 N ( Face) & 1100 N (Edge ), Minimum Compressive Strength of 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance of spread of flame of class A category with Property of being Termite / borer free water / moisture proof and fire Retardant WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shuttle and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw. All as per direction of Engineer in charge. Material test Certificate and authentication should be compulsory provided by the manufacturing company.

S&F for aluminium butt hinges 100mm long complete all as specified and directed by Engr-in-Charge.

S&F for aluminium handle 150mm long complete all as specified and directed by Engr-in-Charge.

S&F for Aluminium handles, cast type, anodised 100 mm long complete all as specified and as directed by Engr-in-Charge.

S&F for aluminium alloy anodised sliding door bolt 300mm long with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and as directed by Engr-in-Charge.

S&F for aluminium, anodised barrel tower bolts 150mm long of extruded section and fixed complete all as specified and as directed by Engr-in-Charge.

S&F for aluminium, anodised barrel tower bolts 100mm long of extruded section and fixed complete all as specified and as directed by Engr-in-Charge.

M&L for 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints and including hold fast of FI 30x3mm, 150mm long, 6 Nos for each chowkat with filling PCC 1:3:6 type C-2 complete all as specified and as directed by Engr-in-Charge.

S&F for 25mm thick Veneered particle board exterior grade solid core general purpose type with decorative veneer on both faces of type 'BB" fixed with screws to timber frame work complete all as specified and directed by Engr-in-Charge.

S & F for powder coated (50 micron) window or ventilator shutter and frame any type (slidding or openable) with frame or other similar work etc section fabricated by using the JINDAL/ INDAL /HINDALCO /sections including necessary roller,wheel cleat handals locking arrangements also to receive 4.8mm thick glass with aluminum chanel, rubber beading and stainless steel screws including and rubber gasket beading etc complete (the weight of rubber gasket beading will not be measured with the weight of aluminum shutter glass) all scections as approved by GE

Supply and fixing Aluminum powder coated deco grill make DG 104 (10 mm thick section ) incl 'F'/'L' channel alround grill complete all as specified and directed by Engr-in-Charge.

S&F for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-Charge.

S&F Glazing with figured glass(Frosted), pin head type, 3mm thick, and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.

S&F steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete but gear operated type with bevel gear box and crank handle thickness of lathe 1.25 mm incl taking down old rolling shutter.

M&L for preparation of new steel surfaces of any description and applying two coats of Aluminium paint complete all as specified and as directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cum,getting out in soft and disentegrated rock., returning, filling in and ramming earth or broken rubble mixed with earth aroun, in layers not exceeding 25cm complete all as specified and directed by Engr-in-Charge.

M&L PCC Type C-2 1:3:6 (40mm graded aggregate) cement concrete in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

S&F for roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings, MS pipe for post and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to (Fe- 290 (Gde E- 165) complete all as specified and directed by Engr-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed by Engr-in-Charge

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing etc confirming to (Fe- 290 (Gde E- 165) complete

M&L for applying two coats of synthetic enamel paint over red oxide priming Surfaces of any description, over 10cm in width or girth,not otherwise described including preparation of new steel surfaces complete all as specified and directed.

S&F for wind ties for roof including securing bolts/screws etc confirming to Fe-290. Gde-E-165 complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of synthetic enamel paint over red oxide priming Surfaces of any description, nexc 10cm in width or girth,not otherwise described including preparation of new steel surfaces complete all as specified and directed by Engr-in-Charge.

S&F for PVC insulation panels 10mm thick with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. As per specification and drawing complete all as specified and directed.

Hangers 6 mm dia. G.I. (upto1200mm length) 1200mm length) adjusting level fixed to roof slabs by means ofceilling cleats made out of G.I.flat 40 x 3 mm size 60mm longand expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by Engr-in-Charge

S&F for Gl frame work of size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed by Engr-in-Charge.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/disintegrated rock complete all as specified and directed by Engr-in-Charge.

M&L Hardcore broken stone or boulders of gauge exc. 63 mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to true surface

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge.

Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed of CM 1:4, complete all as specified and directed by Engineer-in-charge.

Material and labour for glazed ceramic coloured tiles of size 450X 350X 7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick backing coat in CM (1:3) complete all as specified and as directed.

Taking up or down 15 mm steel tubing and connections, fixed to wall /floor including removal to store complete all as specified and as directed by Engr-in-Charge.

Taking up or down 20mm steel tubing and connections, fixed to wall /floor including removal to store complete all as specified and as directed by Engr-in-Charge.

Taking up or down 25 mm steel tubing and connections, fixed to wall /floor including removal to store complete all as specified and as directed by Engr-in-Charge.

Supplying and laying of 15 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 concealed fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engr-in-Charge.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 concealed fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engr-in-Charge.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube

S&F Factory Made Solid PVC Moulded Door Shutter with particle boards, 28 to 30mm thick (stiles), with 2 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face including 100mm stainless steel hinges -3Nos, 150mm long alumimium handle -2 Nos, 200mm long alumunium tower bolt-3Nos for each shutter complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick factory made 2nd class hard wood rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated including 100mm stainless steel hinges -3Nos, 150mm long alumimium handle -2 Nos, 200mm long alumunium tower bolt-2Nos, 150mm long slding door bolt 16mm dia -01 No for each shutter complete all as specified and directed by Engr-in-Charge.

M&L for preparation for new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan (semi pedestal pattern- anglo indian type), white including PVC Seat cover with hanging device (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F PVC valveless, symphonic action type, flushing cistern, 10 liters, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or level, fixed in repairs including flush pipe complete all as specified and as directed by Engr-in-Charge.

S&F in repairs concealed CP stop cock/angle cock 15mm dia, fancy type with capstone heads screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and as directed.

S&F in repairs bib taps two way, 15mm dia, cast copper alloy, fancy type, with capstone head, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and as directed by Engr-in-Charge.

S&F in repairs bib taps, 15mm dia, cast copper alloy, fancy type, with capstone head, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and as directed.

S&F Swivel shower of C P Brass any colour for fixing with 15mm pipe .(Minimum weight 40gms) fixed in repair complete all as specified and as directed by Engr-in-Charge.

S&F Shower arm 15mm size,195mm long with bend of 45degree with flange of CP brass any colour. (Minimum weight 40gms) fixed in repair complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Towel Rail 600mm long of CP brass fixed with and including Chromium plated brass screws and wooden/plastic cleats .(Minimum weight 190gms) fixed in repair complete all as specified and as directed by Engr-in-Charge.

S&F PVC connections 15 mm size with PTMT nuts of length 600m fixed in repair complete all as specified and as directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and abs wall hook including making connections and fixed in positions complete in all respect as specified and as directed by Engr-in-Charge.

S&F for white colour vitreous china urinals, (half stall type), complete including providing and fixing plugs,bedding urinal against wall in cm 1:2 securing urinal to plugs with and including 60 mm long brass screws,pointing around urinal back in cm ,fixing automatic flushing cistern with brackets , flush pipe,grating and union for discharge pipe to flushing cistern,trap and waste pipe and including 15mm bib tap push type and 450mm long PVC connection complete all as specified and directed by Engr-in-Charge

S&F for vitreous china wash basin, white, ovel shaped back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, CP grating and union and 40mm dia PVC discharge pipe upto floor trap complete all as specified and as directed.

S&F in repairs pillar taps, 15mm dia, cast copper alloy, fancy type long shanke with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified and as directed by Engr-in-Charge.

Demolition of concrete of any type and any description complete all as specified and directed by engineer in charge.

M&L for granite (of any type) 20 mm thick work (table rubbed and polished) over 75mm thick RCC(nominal mix 1:2:4 incl 8mm dia TMT bar) slab in platforms for WHB, urinal partition etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade complete over and including screed bed or bedding layer of mortar 15 mm thick in CM 1:3 for laying floor finishes all as specified and as directed.

Supply and fixing in repair PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints including bends alonwith all fittings fixed to walls or floor for out let of EWC etc

M&L for 100 mm dia PVC(SWR) floor trap, with Stainless steel grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by Engr-in-Charge.

Dismantling/ Taking down bessian base felt or clay tiles or any other water proofing treatment from roof/ chajja including cement plaster, cleaning the surface and remove the dismantled debris to a distance excedding 1.5KM but n.exc 5Km to out side the MD land all as specified and as directed by Engr-in-Charge.

M&L for 25mm thick cement concrete (1:2:4) type B0 (using 12.5mm graded aggregate) as in leveling course of slab complete all as specified and as directed by Engr in Charge

M&L for water proofing treatment to the roof slab using 4mm thick APP modified membrane consisting five layer membrane with features as specified, weighing not less than 4.0Kg/m2 laid over a coat of cold applied bitumens primer @ 0.4 ltr per sqm on surface provide a layer of APP modified membrane by torching application incl sealing the overlap with torching with 150mm on length side and 100mm on width side as per manufacture's instruction incl joints and changes in direction be coverred with thin cement slurry in CM 1:3 mixed with SBR latex @ 200ml/bag of cement curved well before laying of membrane all as per manufacturer's instruction and provide two finishing coat with solar reflective bitumnous aluminium paint @ 0.20Kg/m2 as prescribed by manufacturer of membrane to the satisfaction of Engr-in-Charge. Note:- (i) Irrecpectiveof the lap the net covered area will only be measured for payment. (ii) The quoted rate is deemed to be inclusive of bituminous primer, APP membrane , solar reflective bituminous aluminium paint & SBR latex.

Removal of soft/ disintegrated rock n. exe 50 mtr and depositing where as directed n exe 1.50m high from starting point all as specified and as directed

M&L for solid PVC frame (single, rebated) of size 60mmx30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing(Note: Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold door properly for a long life.

Taking down carefully aluminium point wiring (light, fan, socket, bell or power) complete including all fittings and fixtures, removing, materials from site and making good disturbed surfaces of wall, ceilings etc.

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and draw into and including rigid non-metallic PVC conduit of 20mm dia or higher,and including all PVC conduit accessories concealed into wall by cutting of chases in wall/ceiling and including replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc complete all as specified and directed for one light/fan point controlled by one, one way switch 06 Amps ,Note-Rate is inclusive of Cutting/chases of wall/floor/ceiling.

All as per item No 105 but 2/3 pin socket out let 5 Amps with 1.5 Sqmm on independent board.

All as per item No 105 but 2/3 pin socket out let 5 Amps with 1.5 Sqmm on same board.

All as per item No 2 here-in-before but for 2 in 1 three pin socket outlet 15/20 Amps on independent board with 4 Sqmm cable FRLS copper conductor multistranded including 4 sqmm PVC insulated and unsheathed FRLS copper conductor cable as earth continuity wire all as specified and directed by Engr-in-Charge.

Supply & Fixing modular switch 1 way 6A, 1 module, 230 volts.

Supply & Fixing modular switch one way 16 Amps, 1 module, 230 volts.

Supply & Fixing modular socket 6 Amps-2/3 pin combined, 2 module.

Supply & Fixing modular socket 6A/16A-2/3 pin combined, 2 module.

Supply and fix ceiling rose surfaces bakelite 65 x 50 mm three terminals including supply and fix PVC plate or square blocks.

Supply & Fixing in replacement of stepped type 2 module modular electronic fan regulator flush type including removal of old one.

Supply & fixing in replacement of MCB, 6 to 32 Amps, single pole, C Series, 10 KA, 240 volts.

Supply & fixing in replacement of MCB, 6 to 32 Amps, single pole neutral, C Series, 10 KA, 240 volts.

Supply & Fixing in replacement of sheet metal enclosure DB, 8 way, SPN, double door factory made powder coated including neutral and earth link connector flush fixed in wall complete including dismantling of old one complete all as specified and directed.

Supply & Fixing in replacement of submain wiring with 2 Runs of 2.5 Sqmm, PVC insulated, unsheathed, single core, multistranded, 1100 volts, FRLS copper conductor cable drawn in and including 25/32mm wide PVC conduit concealed with all accessories as required along with 1 run of 2.5 sqmm PVC insulated, unsheathed, single core, multi stranded copper conductor cable as continuous earth wire and connecting to existing main switch board/Distribution Board and testing on completion all as directed by Engineer-in-Charge.

Supply & Fixing in replacement of submain wiring with 2 Runs of 4 Sqmm, PVC insulated, unsheathed, single core, multi stranded, 1100 volts, FRLS copper conductor cable drawn in and including 25/32mm wide PVC conduit concealed with all accessories as required along with 1 run of 4 sqmm PVC insulated, unsheathed, single core, multi stranded copper conductor cable as continuous earth wire and connecting to existing main switch board/Distribution Board and testing on completion all as directed by Engineer-in-Charge.

Supply and fixing in replacement of lamp holder(angle/batten holders), PVC/Polycarbonate type internally pre-wired with suitable size and testing complete all as directed by Engr-in-charge.

Supply & fixing brushless direct current (BLDC) ceiling fan 1400mm sweep (ISI Marked), 230 volts, 26 Watt includung connection rod as per existing size of length of GI pipe medium grade including dismantling of old one and depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Orient/Havells/Bajaj

Supply and fixing in replacement of LED tube light fitting surface and wall mounted batten with 20 watts LED having minimum 100 lumens/watts and with integrated electronic driver complete made up of polycarbonate complete all as specified and directed.

Supply & Fixing in replacement of LED inverter bulb of 9/10W with base B22/E27 working on AC supply in normal mode and DC supply in inverter mode,with in built battery backup of upto 4 hrs ,high efficiency , high lumens output complete all as specified and directed.

M/L for earthing complete with steel earth plate eletrode 60cm x 60cm x6mm thick buried dirctly in ground vertically (earth pit not less than 2.25 mtr below ground level) with top edge of plat not less than 1.5 mtr below ground level connected to GI wire 4 mm dia by means of bolts. nuts,check nuts and washers etc including protection pipe 15mm dia up to 7.5m length , provision the earth lead to earth connection in ther main distribution box with lugs and GI nuts,bolts, earthing shall be done all as per shown electrical plate No 5 of SSR part 1 Including neccessary excavation disintergrated hard rock filling earth of 15 mm thick and privision of earth pit provision of 20mm dia eith funel PCC earth chamber 100mm thick precast RCC cover with suitable precast RCC frame and earth test point and testing in presence of Engr-in-Charge.

Excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in hard/dense soil taking down UG cable any size.

Excavation in trenches not exceeding 1.5 m width and not exc 1.5 in depth getting out soft disintegrated rock for laying and taking down UG cable of any size

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated hard/dense soil.

Removal of surplus soil to a distance not exceeding 50 m and depositing where directed by Engr-in-charge.

Supply & Fixingin replacement of LED building security light fitting 60w fixing on wall including 30mm GI pipe with angles with suitable for security light complete. Make : Philips/Wipro/Bajaj/Havells

Supply and fix high density polyethylene pipes of pressure rating 6 kgf/cm2 ( HDPE) of size 20 mm bore having pressure rating 6kgf/sqcm.

Supply & fixing UG LT cable XLPE insulated armoured heavy duty 1100 volts grade with aluminium conductor strandard of size 10 sqmm 2 core including centre gland, lugs, jointing materials etc laid in trenches or fixed it to wall and taking down old unserviceable cable.

Supply and laying GI Pipe light grade of 25 mm dia laid in trenches or fixed in walls complete all as specified and directed.

Tara Construction

M/s Gayatri Contruction Co.